污水处理装置在冶金行业中的应用

对污水处理装置的技术参数、技术要求及设计方案的选择、工作原理做了进一步的阐述。对工业循环冷却水的处理有实际指导意义。     

新建他激反激变换器方程及其解析解

引用文 [1 ]的思路 ,寻找他激反激变换器的运行状态特征参量 (磁通密度增量、剩余磁通密度和占空比 )与构成这一变换器的基本物理参量之间的函数关系。首先阐明由于频率给定 ,他激反激变换器稳态运行时会出现无剩磁工况和有剩磁工况两种。而后确定这两种工况下 ,磁路等效储能空间单位体积每个周期的传输能量 (命名为“磁能传输密度”)。在这基础上 ,分别建立和解出他激反激变换器在不同工况下稳定运行时应满足的方程。最后根据所得的解析解阐明这种变换器的特性。本文和文 [1 ],以磁路分析为基础建立了一种新的反激变换器理论。     

Investigation of the differential rotation of the large-scale magnetic elements for the solar activity cycles 20 and 21

The differential rotation of the patterns of the large-scale solar magnetic field during solar activity cycles 20 and 21 is investigated. Compact magnetic elements with the polarity of the general solar magnetic field have larger speed of rotation than the elements with the opposite polarity. The surface of the Sun was divided by 10°-zones. In all of them the average rotation rate of the magnetic elements with negative polarity is little higher than that of the magnetic elements with positive polarity, except for 50°-zone of the south hemisphere and at the 10° latitude of the north hemisphere.

The rates of differential rotation for large-scale magnetic elements with negative and positive polarities have similar behavior for both cycles of the solar activity.

The rotation rate varies at polarity reversal of the circumpolar magnetic fields. For the cycle No 20 in 1969–1970 the threefold reversal took place in the northern hemisphere and variations of rotation rate can be noticed for magnetic elements both with positive and negative polarity for each 10°-zone in the same hemisphere.     

Reconstructed 3-d magnetic field structure and hard X-ray two ribbons for 2000 Bastille-day event

The Bastille-day event in 2000 produced energetic 3B/X5.6 flare with a halo CME, which had great geo-effects consequently. This event has been studied extensively and it is considered that it follows the two-ribbon flare model. The flare/CME event was triggered by an erupting filament and TRACE observations showed formation of giant arcade structures during the flare process. Hard X-ray (HXR) two ribbons revealed for the first time in this flare event (Masuda et al., 2001). The reconstruction of 3-D coronal magnetic fields revealed a magnetic flux rope structure, for the first time, from extrapolation of observed photospheric vector magnetogram data and the flux rope structure was co-spatial with portion of the filament and a UV bright lane (Yan et al., 2001a, 2001b). Here we review some recent work related to the flux rope structure and the HXR two ribbons by comparing their locations and the flux temporal profiles during the flare process so as to understand the energy release and particle accelerations. It is proposed that the rope instability may have triggered the flare event, and reconnection may occur during this process. The drifting pulsation structure in the decimetric frequency range is considered to manifest the rope ejection, or the initial phase of the coronal mass ejection. The HXR two ribbons were distributed along the flux rope and the rope foot points coincide with HXR sources. The energy dissipation from IPS observations occurred within about 100 R _⋅ is consistent with the estimate for the flux rope system. This revised version was published online in August 2006 with corrections to the Cover Date.     

一个简单有效的磁记录纠错系统

介绍一种简单有效的纠错编码方法 ,用于资源卫星高密度数字磁记录器 ,使误码率由 10 -6降低到 10 -11,同时介绍它的基本工作原理、实现方案及试验结果。     

劳（Lao）喷管扩张段优化设计的数值方法研究

本文建立了火箭发动机喷管扩张段优化设计（Lao喷管）的型面曲线近似作图法的数学模型，将作图法转化为等价的优化问题，并给出了优化问题解的迭代方法，最后采用泛函网络的方法对离散的数值解进行了曲线拟合，以便于数控加工的编程。     

二次抛物线型面喷管参数的优化选择

二次抛物线型面是火箭发动机喷管较常用的一种型面，对其参数进行优化选择是必要的，在喷管型面长度和出口扩张半角确定的条件下，优化方法是把比冲作为目标函数，利用一维等熵流的气动力公式，二次抛物线型面的几何关系和计算机求极大值方法，确定达到比冲最佳值的设计变量一喷管初扩张角和出口马赫数。     

固体发动机喷管烧蚀和温度场测量

介绍了含铝复合推进剂发动机试验时,对其喷管进行的烧蚀和温度场测量,获得了复合喷管结构中的烧蚀和瞬时温度分布.     

塞式喷管多参数性能优化计算

从影响塞式喷管推力性能的因素中总结出内喷管倾角，内膨胀比、总膨胀比，燃气总压和飞行高度这五个主要因素，并以推力最大为目标函数运用枚举和逐层优化的方法对上述五个参数的取值进行优化计算，提出了对这五个参数进行优化取值的方法并得到了相关结论，其结论可为实际的塞式喷管发动机设计研制提供部分的理论依据。指导相关设计参数的确定。     

固体火箭发动机燃烧室和喷管热防护安全限设计系统

随着固体推进技术的发展，越来越多的战术导弹采用了单室双推力固体火箭发动机，燃烧室和喷管的受热情况严重，必须对其进行深入研究，以保证发动机可靠工作。文中对此建立了集药柱几何计算、内流场、传热与烧蚀于一体的计算系统，并形成了成熟的软件，对一具体算例进行了绝热结构和烧蚀结构防护层的安全厚度设计，与工程实际应用厚度的比较表明，此系统用于工程中方便可靠。