利用热源温度场迭加法诊断持续点热源的强度及位置

可重复使用运载器的防热瓦故障会使航天器的局部结构产牛热源，并在结构中形成温度场。应用热源温度场迭加法的解函数，解得结构温度历程，然后据此温度的变化率趋势判断出热源位置，在此基础上依据多点测最值构造出辨识参数用于热强度识别，通过对一薄壁结构模型算例的计算仿真，证明了本文所提方法的有效性。论文工作为进一步开展热源诊断技术研究，提供了可资工程实践应用的数值算法体系以及有益的数值计算结论。     

基于超声波的复合材料层间剪切强度表征分析

采用数字采样、相关分析、频谱分析等方法,结合部分复合材料层板剪切强度试验,验证材料性能与分析结果的对应性、研究分析参数的选择,为无损表征复合材料剪切强度的可行性做了有益的探索.     

DA4169合金高温疲劳裂纹扩展速率

实验研究了直接时效ＤＡ４１６９合金５５０℃、６５０℃下的疲劳裂纹扩展行为，并进行了带上峰值保持时间的试验。结果表明：连续循环的ｄａ／ｄＮ值基本上与普通４１６９的相当，但在６５０℃下略优；６５０℃带上峰值保时１５ｓ的ｄａ／ｄＮ值比连续循环的大大加速。     

含非对称裂纹三维有限大体应力强度因子能量释放率方法的封闭解

 本文提出一种新的半工程半解析的方法,导出含非对称裂纹三维有限大体应力强度因子的封闭解。根据此方法,只需少量的机时,即可获得一系列结果。本方法及所得结果在工程上有实际应用价值。     

EXPERIMENTAL RESEARCH ON STRESS INTENSITY FACTOR K_Ⅲ FOR 3-D CRACK BY CAUSTICS

ＥＸＰＥＲＩＭＥＮＴＡＬＲＥＳＥＡＲＣＨＯＮＳＴＲＥＳＳＩＮＴＥＮＳＩＴＹＦＡＣＴＯＲＫⅢＦＯＲ３┐ＤＣＲＡＣＫＢＹＣＡＵＳＴＩＣＳＷｕＤａｆａｎｇ，ＧａｏＺｈｅｎｔｏｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＳｏｌｉｄＭｅｃｈａｎｉｃｓ，ＢｅｉｊｉｎｇＵｎｉｖｅ...     

风洞试验中风剖面的模拟及近流场特性分析

首先简单介绍了日本东京工艺大学风工程研究中心新建的开环流低速边界层风洞中风剖面模拟的试验情况.基于试验结果,采用被广泛应用的三角尖劈加上布置粗糙元的方法,成功地模拟出日本建筑学会定义的四类不同场地对应的风剖面.通过对试验数据的比较分析,就所采用的立方体粗糙元及三角尖劈对最终模拟得到的风剖面特性的影响进行了比较分析.其次,对风剖面模拟及特性判定中的几个重要问题,如三角尖劈的形状优化、风速功率谱的一致性、积分尺度的分析方法等进行了分析.最后,基于以上分析,对在边界层风洞中模拟预定的风剖面提出几点参考意见.     

地磁暴前地面宇宙线强度变化Morlet小波特征分析

用Morlet小波变换对Oulu台站和Apatity台站（主要是Apatity台站）1998-2002年间宇宙线静日和地磁暴前的地面宇宙线强度变化特征进行分析,得到:在宇宙线静日期间普遍存在准24 h周期变化特征,并且在当地时间0200,1400左右分别出现最小值和最大值;对12个例子的分析可以看到地面宇宙线强度在地磁暴之前1-2天均出现了不同于宇宙线静日期间变化特征,或有小尺度周期出现,或周期变化完全消失,或有异常24h周期变化,这种变化特征在一定程度上可作为地磁预报的先兆特征之一.     

An Artificial Neural Network based approach for estimation of rain intensity from spectral moments of a Doppler Weather Radar

By using a Doppler Weather Radar (DWR) at Shriharikota (13.66°N & 80.23°E), an Artificial Neural Network (ANN) based technique is proposed to improve the accuracy of rain intensity estimation. Three spectral moments of a Doppler spectra are utilized as an input data to an ANN. Rain intensity, as measured by the tipping bucket rain gauges around the DWR station, are considered as a target values for the given inputs. Rain intensity as estimated by the developed ANN model is validated by the rain gauges measurements. With the help of a developed technique, reasonable improvement in the estimation of rain intensity is observed. By using the developed technique, root mean square error and bias are reduced in the range of 34–18% and 17–3% respectively, compared to Z–R approach.     

Experimental investigations of the spray structure and interactions between sectors of a double-swirl low-emission combustor

In this paper, the spray characteristics of a double-swirl low-emission combustor are analyzed by using Particle Imaging Velocimetry (PIV) and Planar Laser Induced Fluorescence (PLIF) technologies in an optical three-sector combustor test rig. Interactions between sectors and the influence of main stage swirl intensity on spray structure are explained. The results illustrate that the swirl intensity has great effect on the flow field and spray structure. The spray cone angle is bigger when the swirl number is 0.7, 0.9 than that when the swirl number is 0.5. The fuel distribution zone is larger and the distribution is more uniform when the swirl number is 0.5. The fuel concentration in the center area of the center plane of side sector (Plane 5) is larger than that of the center plane of middle sector (Plane 1). The spray cone angle in Plane 5 is larger than that in Plane 1. The width of spray cone becomes larger with the increase of Fuel–Air Ratio (FAR), whereas the spray cone angle under different fuel–air ratios are absolutely the same. The results of the mechanism of spray organization in this study can be used to support the design of new low-emission combustor.     

绿色技术创新对企业成长绩效的影响——基于研发投入强度的调节作用

随着我国经济的高速发展,生态问题日渐凸显.通过技术创新处理好经济发展和生态效益的关系成为实现绿色发展的内在要求.本文利用94家创业板制造业上市公司2014-2017年的数据,采用广义最小二乘法对绿色技术创新、研发投入强度与企业成长绩效之间的关系进行实证分析,探讨了绿色技术创新对企业成长绩效的直接影响,并对研发投入强度的...