关于厚薄板弯曲分析的内位移杂交元法

 本文通过引入单元内位移和优化处理的单元应力场,以计入剪切变形的板弯曲能量泛函为基础,导出适用于厚、薄板分析的四边形杂交应力元。内力场和内位移的合理选择避免了单元零能模式的出现、避免了解的剪切自锁现象。该优化单元显示了较好的通用性和收敛性。对关于剪切自锁的RCI判据提出了反例、说明了它的局限性。     

Analysis of crack opening stresses for center- and edge-crack tension specimens

Accurate determination of crack opening stress is of central importance to fatigue crack growth analysis and life prediction based on the crack-closure model. This paper studies the crack opening behavior for center- and edge-crack tension specimens. It is found that the crack opening stress is affected by the crack tip element. By taking the crack tip element into account, a modified crack opening stress equation is given for the center-crack tension specimen. Crack surface displace- ment equations for an edge crack in a semi-infinite plate under remote uniform tension and partially distributed pressure are derived by using the weight function method. Based on these displacements, a crack opening stress equation for an edge crack in a semi-infinite plate under uniform tension has been developed. The study shows that the crack opening stress is geometry-dependent, and the weight function method provides an effective and reliable tool to deal with such geometry depen- dence.     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.     

Influence of different data fusion methods on the accuracy of three-dimensional displacements field

Combining multi-source data can improve the accuracy and the spatial resolution of the three-dimensional (3-D) displacements field. How to effectively integrate multi-source data to obtain high-precision and high spatial resolution 3-D displacements field is worthy of further study. The stochastic model and fusion model of integrating multi-source data affect the accuracy of data fusion. In this paper, based on the least squares method, the effects of different stochastic models and data fusion models on the 3-D displacements field’s accuracy are studied. The optimal method for estimating large-scale 3-D displacements field from integrated InSAR, leveling and GPS measurements is obtained. Then we realize the integrating InSAR, leveling and GPS measurements to obtain the high-precision 3-D displacements velocity field in Tianjin (China) from 2016 to 2018. The results are validated with GPS measurements at 6 independent stations, with the root mean squares (RMS) residuals of the discrepancies being 2.39 mm/yr, 2.54 mm/yr and 2.83 mm/yr in eastern, northern and vertical directions, respectively. By comparing different stochastic models, the 3-D displacements field obtained from multi-source data is optimized by the variance component estimation-least squares method, which is better than weighted least squares (WLS) method. By comparing different data fusion models, the accuracy of the horizontal displacements velocity is better than that of interpolated GPS results. The horizontal displacements component has a great influence on the vertical displacements velocity accuracy in the process of acquiring the 3-D displacements velocity by integrating InSAR, GPS and leveling measurements. This study provides a reference method for integrating multi-source data to obtain 3-D displacements field. This method effectively utilizes the advantages of GPS, InSAR and leveling measurements, and extends the limitations of single technical in describing surface-time scale applications. The 3-D displacements information with a large spatial scale and high spatial resolution provide a reliable data basis for studying the crustal movement and its dynamic mechanism.     

基于互相关矢量图的车牌定位新算法

互相关矢量图是由流场粒子图像测速的互相关计算结果绘成的矢量图形,提出一种车牌自动定位的新算法--VMLA算法,该算法基于字符笔画左右边缘之间的互相关矢量图的结构特点,可以从复杂车牌图像背景中搜索到车牌的正确位置.VMLA算法具有较强的车牌大小自适应性和实时处理能力,540幅车牌图像的实验结果初步验证了该方法的有效性.