线性四元树表示图象的距离变换

二元数组表示的图象使用的距离概念运用于线性四元树表示。指出棋盘距离特别适合于线性四元树。定义线性四元树的棋盘距离变换为树中各个黑四分形中心到最近边界四分形黑一白边界的距离。这里提出的距离变换算法主要特点是(1)它是一种代数方法,(2)各个四分形只计算一次距离,和(3)距离信息非常快地传递到区域内部。该算法可以推广到线性八元树表示的三维客体。     

离散事件动态系统的GSMP模型及扰动分析

对离散事件动态系统（ＤＥＤＳ）的仿真过程建立了包含中断事件集和驱动事件集的广义半马尔可夫过程（ＧＳＭＰ）模型，对参数的无穷小扰动所引起的系统状态转移时刻进行了扰动分析，最后，讨论了扰动分析所需要的可变换条件和样本性能函数的关系，并提出值得进一步研究的问题。     

直齿渐开线齿轮齿面磨损模拟计算

在初步研究直齿轮齿面磨损的基础上,对磨损机理做了进一步的分析研究,综合考虑了摩擦系数、载荷、齿面曲率及滑动系数等影响磨损量的主要因素,提出了齿面磨损量的计算公式,并运用齿面离散化方法进行齿廓磨损的数值计算。     

离散事件系统的Petri网图仿真

1.前言 离散事件动态系统DEDS(Discrete Event Dynamic System)的传统分析方法——应用排队论和随机过程理论为离散事件动态系统建立排队网络模型,在很多情况下已不适用。新的理论和研究方法相继提出。其中之一是“皮特里网”(Petri Nets)理论。另一种比较成熟的方法是仿真法,但是,仿真法要以高昂的计算机设备的大量计算时间为代     

基于Riccati方程的离散容错控制系统设计

基于离散系统的Ｒｉｃｃａｔｉ方程，提出一种对传感器失效具有完整性的离散控制系统的设计方法，给出了完整性设计方法的设计步骤，并用设计实例验证了该方法的有效性．该方法还可推广用于执行器失效的情况．     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

Real-time mosaicking for infrared videos from an oblique sweeping camera

Image mosaicking is widely used in Geographic Information Systems (GISs) for large-scale ground surface analysis. However, most existing mosaicking methods can only be used in offline processing due to the enormous amounts of computation. In this paper, we propose a novel and practical algorithm for real-time infrared video mosaicking. To achieve this, a novel fast template matching algorithm based on Sum of Cosine Differences (SCD) is proposed to coarsely match the sequential images. The high speed of the proposed template matching algorithm is obtained by computing correlation with Fast Fourier Transform (FFT). We also propose a novel fast Least Squares Matching (LSM) algorithm for inter-frame fine registration, which can significantly reduce the computation without degrading the matching accuracy. In addition, the proposed fast LSM can effectively adapt for noise degradation and geometric distortion. Based on the proposed fast template matching algorithm and fine registration algorithm, we develop a practical real-time mosaicking approach which can produce seamless mosaic image highly efficiently. Experiments on synthetic and real-world datasets demonstrate that the proposed algorithm is not just computationally efficient but also robust against various noise distortions.     

激光功率与底面状态对选区激光熔化球化的影响

为研究激光功率与底面状态对选区激光熔化熔池流动的影响,基于离散单元法建立了选区激光熔化铺粉模型,采用粒径分布与实验相符的马氏体时效钢粉末分别铺展到平坦底面和增材底面上,将计算获得的粉末分布导入到基于有限体积法建立的选区激光熔化熔池计算流体力学模型中,研究激光功率和基板底面粗糙度对熔池流动和熔道表面形貌的影响。采用激光单道扫描实验验证铺粉模型和选区激光熔化模型。结果表明：随着激光功率的降低,单位长度的球化数量增加;由于增材底面使熔池润湿性变差,同时又对熔池流动行为产生扰动,使得增材粗糙底面上熔道的球化数量增加。选区激光熔化铺粉模拟及激光单道扫描模拟结果与实验结果吻合较好。本研究可为选区激光熔化工艺中工艺参数的选择提供理论指导。     

高精度反射面板制造中边值问题的求解方法(英文)

采用三层铝板两层蜂窝芯的夹层结构制造高精度反射面板是一种先进、复杂的技术。其中,单层铝板的受力分析和夹层板的回弹计算是成形精度的根本保障。利用Fourier级数表示单层板应力函数、利用幂级数表示夹层板挠度函数,分别对高精度反射面板制造中单层板压贴和夹层板回弹两类边值问题进行了求解。与有限元模拟结果对比表明,本文提出的单层板压贴膜应力计算Fourier级数法具有较高精度;与试验结果对比表明,本文提出的夹层板回弹量幂级数法具有满意精度。     

分数阶Fourier域非均匀采样Chirp信号的频谱研究

文中提出了一种自适应非均匀采样方法,并利用分数阶Fourier变换对这类非均匀采样信号在分数阶域的频谱进行了分析和研究,得到了这类非均匀采样信号在分数阶域的数字谱表达式;进一步得到了非均匀采样Chirp信号的分数阶频谱表达式;最后,通过仿真验证了结论。