Unsteady wakes-secondary flow interactions in a high-lift low-pressure turbine cascade

Detailed experimental measurements were conducted to study the interactions between incoming wakes and endwall secondary flow in a high-lift Low-Pressure Turbine (LPT) cascade. All of the measurements were conducted in both the presence and absence of incoming wakes, and numerical analysis was performed to elucidate the flow mechanism. With increasing Reynolds number, the influence of the incoming wakes on suppressing the secondary flow gradually increased owing to the greater influence of incoming wakes on reducing the negative incidence angle at higher Reynolds numbers, leading to a lower blade loading near the leading edge and suppression of the Pressure Side (PS) leg of the horseshoe vortex. However, the effect of unsteady wakes on suppressing the profile losses gradually became weaker owing to the reduced size of the Suction Side (SS) separation bubble and increased mixing loss in the free-flow region at high Reynolds numbers. Incoming wakes clearly improved the aerodynamic performance of the low-pressure turbine cascade at low Reynolds numbers of 25,000 and 50,000. In contrast, at the high Reynolds number of 100,000, the profile loss at the midspan and mass-averaged total losses downstream of the cascade were higher in the presence of wakes than in the absence of wakes, and the unsteady wakes exerted a negative influence on the aerodynamic performance of the LPT cascade.     

培养学生英语口语交际能力的策略探讨

文章就大学生英语口语交际能力存在的问题进行了分析,探讨如何提高英语口语交际能力的策略。     

区域开发战略目标定量研究--兼论区域开发战略目标矛盾的协调

文章在回顾我国区域开发战略的基础上,结合我国区域经济发展现状,利用层次分析法建立了区域开发战略模型.通过定量研究,得出了我国区域经济发展必须以社会公平为主目标,同时兼顾效率和可持续发展目标.     

氨电弧喷射推力器实验和数值研究

为了证实氨电弧喷射推力器良好的工作性能，对其进行了系统的实验和数值研究。在实验研究中建立了高真空实验系统、先进的小推力测量系统和恒定电流控制系统，在数值研究中采用二阶精度无波动、无自由参数的耗散差分格式(NND格式)数值求解耦合电磁源项的扩展N-S方程组。通过实验获得了不同结构尺寸的推力器不同工作条件下的工作性能，通过数值模拟给出了推力器的流场结构，预计了其推力、比冲和推进效率。研究结果表明，氨电弧喷射推力器工作性能良好，能够担负一定的空间应用任务。     

CPL蒸发器传热和蒸发流动过程的分布参数模型

针对ＣＰＬ蒸发器，建立了可据以分析其传热过程和蒸发流动过程的分布参数模型，并就一个模拟算例进行了考察，得出了有意义的结论。该模型较之传统集中参数模型的优点在于，其计算结果反映出了蒸发器内沿轴向流动过程中各肋壁温度及肋壁与流动工质之间换热系数大小的变化情况以及蒸发器内局部蒸汽（或液体）的热力状况，因而为从细节上揭示ＣＰＬ蒸发器的传热性能及其工程模型的试验研究、优化设计等打下了一定的基础     

离心式喷嘴工况理论分析

对离心式喷嘴的最大流量原理进行了证明，并求得了该原理成立的边界条件。分析了离心式喷嘴的工况，结果表明，当喷嘴压降等于或大于临界截面处平均余区的１．５倍时，其工况处于临界或超临界状态。导出了波沿离心式喷嘴中液体自由表面的传播速度及其频率的计算公式，从中可以看出，波的传播速度及其频率取决于喷嘴压降及喷嘴的几何特性。     

关于刚体转动的角速度和角加速度的讨论

在理论力学教学中，平面运动刚体的转动与基点无关的证明过于简单，本利用矢量代数的知识，证明平面运动刚体的角度与角加速度与基点的选择无关。     

航空维修人为差错理论分类和对比研究

通过对航空维修人为差错理论的梳理和比较，将航空界已形成的主要人为差错理论分成三类：个人学派、组织学派和系统学派．并对各理论的研究视角、特点、优点和局限性进行了归纳和对比。     

Avoid online radiation risk: Theoretical simulation of chromosome breaks in cells exposed to heavy ions

In this study, we report an easy and quick method on simulating chromosome breaks in cells exposed to heavy charged particles. The theoretical value of chromosome break was calculated, and validated comparison with experimental value by using premature chromosome condensation technique. A good consistency was found between theoretical and experimental value. This suggested that higher relative biological effectiveness of heavy ions was closely correlated with its physical characteristics. Also, a safe approach on predicting chromosome breaks in cells exposed to heavy ions at off-line environment can be considered. Furthermore, three key factors influencing the theoretical simulation was investigated and discussed.     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.