激光陀螺稳频反射镜的选择

讨论了球面及平面两种稳频反射镜的加工误差对陀螺腔内光路的偏移作用， 分析了腔内光路随这两种反射镜在稳频平移过程中的变化规律以及光路不对称变形对陀螺朗缪尔零漂的影响。分析结果表明： 无论从稳频反射镜存在加工误差考虑， 还是从稳频平移对陀螺性能影响的考虑， 选择球面镜作稳频反射镜要优于平面镜。     

导弹电液伺服机构的模糊滑模变结构跟踪控制研究

为减小导弹电液伺服机构滑模变结构跟踪控制中的抖振,研究了一种模糊滑模变结构控制(FS-MVSC)方法。给出了模糊滑模控制器的构成,以及模糊化、模糊规则与推理、反模糊化处理的方法。在保持系统对参数变化和外干扰不确定强鲁棒性的同时,可使系统具有较优的动态响应和稳态控制精度。仿真结果表明,该控制方案有效。     

一种采用“捷联+平台”方案的新型航空重力仪

针对资源勘探等高精度应用对航空重力仪测量精度和分辨率的更高要求,在前期研究基础之上,研发了新一代采用"捷联+平台"方案的新型航空重力仪。设计了采用石英挠性加速度计和光纤陀螺的捷联式重力仪,采用了新型温度控制方案,提高了重力仪的环境适应能力。设计了稳定平台,将捷联式重力仪保持在垂直方向,隔离载机的角运动干扰,减小了重力传感器的动态误差。飞行试验表明,该方案是有效的,将航空重力仪的精度和分辨率提升到优于1mGal/3km。     

一种新的共线平动点拟周期轨道稳定保持策略

限制性三体问题下共线平动点附近的拟周期轨道在深空探测中具有重要的实际应用价值,得到了各航天大国的广泛重视。通过将动力学中心流形结构引入轨道控制方法的设计之中,得到了基于投影到中心流形的共线平动点拟周期轨道稳定保持策略。首先推导了会合坐标到中心流形坐标的正则变换方法,在此基础上设法通过引入轨道机动,将偏差状态点投影到中心流形上,从而达到消除不稳定分量的目的。该方法充分整合了平动点的动力学特性,并且也适用于周期轨道的稳定保持。通过对Lissajous轨道和晕轨道的数值仿真表明,该方法较以往方法具有更强的稳定性,能在显著降低轨控燃料消耗的基础上达到较好的稳定保持效果。     

A low-thrust transfer between the Earth–Moon and Sun–Earth systems based on invariant manifolds

A low-energy, low-thrust transfer between two halo orbits associated with two coupled three-body systems is studied in this paper. The transfer is composed of a ballistic departure, a ballistic insertion and a powered phase using low-thrust propulsion to connect these two trajectories. The ballistic departure and insertion are computed by constructing the unstable and stable invariant manifolds of the corresponding halo orbits, and a complete low-energy transfer based on the patched invariant manifolds is optimized using the particle swarm optimization (PSO) algorithm on the criterion of smallest velocity discontinuity and limited position discontinuity (less than 1 km). Then, the result is expropriated as the boundary conditions for the subsequent low-thrust trajectory design. The fuel-optimal problem is formulated using the calculus of variations and Pontryagin's Maximum Principle in a complete four-body dynamical environment. Then, a typical bang–bang control is derived and solved using the indirect method combined with a homotopic technique. The contributions of the present work mainly consist of two points. Firstly, the global search method proposed in this paper is simply handled using the PSO algorithm, a number of feasible solutions in a fairly wide range can be delivered without a priori or perfect knowledge of the transfers. Secondly, the indirect optimization method is used in the low-thrust trajectory design and the derivations of the first-order necessary conditions are simplified with a modified controlled, restricted four-body model.     

Spatial approaches to moons from resonance relative to invariant manifolds

In this study, the final approach to a moon or other body from resonance is explored and compared to the invariant manifolds of unstable periodic orbits. It is shown that the stable manifolds of planar Lyapunov orbits can act as a guide for the periods or resonances that are required for the final approach in both the planar and spatial problems. Previously developed techniques for the planar problem are expanded for use with resonances and used for comparison with trajectories approaching a moon from these resonances. A similar technique is then used for exploring the relationship of invariant manifolds to approach trajectories in the spatial problem. It is shown that the invariant manifolds of unstable periodic orbits provide insight into the trajectory design, and they can be used as a guide to the more direct approach trajectories.     

二值箝位电路的理论分析及仿真研究

在CCD焦面驱动电路设计中，经常要求产生在两个指定电平间振荡的信号，二值箝位电路以其简单的拓扑结构、稳定的性能表现而得到应用。尽管二值箝位电路的稳态输出仅受拓扑结构影响，而与初始条件无关，然而其暂态输出会随着初始条件以及拓扑结构的不同而有所差异，造成二值箝位电路设计及其应用的复杂性，文章深入地研究二值箝位电路不同的拓扑结构以及不同的输入条件对其输出的影响，给出了各种情况下的仿真结果，并针对仿真结果给出了定量和定性的分析。     

煤油燃料超燃冲压发动机燃烧特性实验研究

为研究空气节流时序对超燃冲压发动机点火和火焰稳定的影响,本文通过实验方法研究了13个状态的煤油燃料超燃冲压发动机的燃烧特性,煤油燃烧通过先锋氢气和节流空气增强稳定性。通过两个固定位置的压力传感器来监测火焰稳定状态,采用纹影和OH-PLIF相结合的测量手段,获得了流场结构和火焰发展信息。发动机入口来流条件为Ma = 2.0,总温950 K,总压0.82 MPa。在空气节流的作用下,煤油被先锋火焰引燃;在先锋氢撤除后,煤油仍然可以稳定燃烧。在扩张段中,空气节流和燃烧共同作用产生的激波串移动速度约为52 m/s,但在凹槽内其速度仅为3.7 m/s。通过监测点压力变化情况可以区分所研究状态的火焰稳定与否,通过对13个研究状态的考察,获得了火焰稳定临界曲线。当所研究状态点在临界曲线右上方区域时,火焰状态稳定;当所研究状态点在临界曲线左下方区域时,火焰将被吹熄;当所研究状态点在临界曲线上时,火焰不稳定,在空气节流撤除之前将被吹熄。     

Alternative transfer to the Earth–Moon Lagrangian points L4 and L5 using lunar gravity assist

Lagrangian points L4 and L5 lie at 60° ahead of and behind the Moon in its orbit with respect to the Earth. Each one of them is a third point of an equilateral triangle with the base of the line defined by those two bodies. These Lagrangian points are stable for the Earth–Moon mass ratio. As so, these Lagrangian points represent remarkable positions to host astronomical observatories or space stations. However, this same distance characteristic may be a challenge for periodic servicing mission. This paper studies elliptic trajectories from an Earth circular parking orbit to reach the Moon’s sphere of influence and apply a swing-by maneuver in order to re-direct the path of a spacecraft to a vicinity of the Lagrangian points L4 and L5. Once the geocentric transfer orbit and the initial impulsive thrust have been determined, the goal is to establish the angle at which the geocentric trajectory crosses the lunar sphere of influence in such a way that when the spacecraft leaves the Moon’s gravitational field, its trajectory and velocity with respect to the Earth change in order to the spacecraft arrives at L4 and L5. In this work, the planar Circular Restricted Three Body Problem approximation is used and in order to avoid solving a two boundary problem, the patched-conic approximation is considered.