MAGNETOSPHERIC PHYSICS IN CHINA:2000-2002

This brief report presents the latest advances of the magnetospheric physics researches in China during the period of 2000-2002, made independently by Chinese space physicists and through international cooperation. The related areas cover almost every aspect of magnetospheric physics.     

杨振宁的科学研究艺术

杨振宁教授是位著名的物理学家，诺贝尔物理学奖金获得者。他在物理学研究中取得的成就同科学研究的艺术是分不开的。本文分析了如下三个问题：第一“对称性支配相互作用”与杨米尔斯规范场理论；第二，科学研究中的风格和ｔａｓｔｅ；第三，科学研究方向的选择。该文无论是对年青的研究还是对成熟的学者从事科学研究都有指导意义。     

再入体激波层和近尾流热辐射实验研究

本文介绍了在弹道靶设备上对再入速度下模型的热辐射进行的实验研究工作。铝、高硅氧和聚碳酸酯三种材料的模型在速度为4.5～6.0(km/s),压力为600—8000Pa条件下做了实验,在258nm—1100nm光谱范围内完成了九个波段的辐射测量,给出了三种材料模型的辐射光谱分布曲线。结果表明辐射量除了受环境条件影响外,还强烈地依赖于模型材料;由烧蚀产物引起的辐射通量主要在可见光和近红外区(465nm以上)。估算了烧蚀产物引起的辐射加热率,对头部和近尾流辐射通量做了比较。     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

高科技与微型涡轮发动机的研制

在收集、分析国外某些微型涡轮发动机的文献和实物的基础上，结合参加自行设计微型涡轮发动机的体会，提出应用现有的和正在发展中的新技术、新材料、新工艺，将对微型涡轮发动机的性能和研制周期产生较大的影响。     

新一代运载火箭

综述了国内外运载火箭的现状 ,指出了国内运载火箭技术上的差距以及研制新一代运载火箭的必要性与基本思路 ,提出了新一代运载火箭的总体技术方案 ,并对方案论证与工程实施中的几个主要问题进行了探讨     

《新时代交互英语》评介

通过介绍《新时代交互英语》（NEW ERA INTERACTIVE ENGLISH）内容和特点，选择合适的教材对大学英语教学至关重要，笔者针对试点班学生所选的《新时代交互英语》一书，对其视、听、说教程的内容和优缺点做了分析和评价，并以问卷调查形式更加清晰的了解到学生对于该套教材以及新的听说教学模式的反馈和意见，为新形势下教师的教学提供了帮助。     

新时期高校学生党建工作的思考

文章以学生党建工作的实践角度，从认识学生党员发展工作的重要性，学生党员发展基本途径和教育培养过程做了探讨。     

Spectra and time variability of black-hole binaries in the low/hard state

We propose a jet model for the low/hard state of galactic black-hole X-ray sources which explains the energy spectra from radio to X-rays and a number of timing properties in the X-ray domain such as the time lag spectra, the hardening of the power density spectra and the narrowing of the autocorrelation function with increasing photon energy. The model assumes that (i) there is a magnetic field along the axis of the jet, (ii) the electron density in the jet drops inversely proportional to distance, (iii) the jet is “hotter” near its center than at its periphery, and (iv) the electrons in the jet follow a power-law distribution function. We have performed Monte Carlo simulations of Compton upscattering of soft photons from the accretion disk and have found power-law high-energy spectra with photon-number index in the range 1.5–2 and cutoff at a few hundred keV, power-law time lags versus Fourier frequency with index 0.8, and an increase of the rms amplitude of variability and a narrowing of the autocorrelation function with increasing photon energy as they have been observed in Cygnus X-1. The spectrum at long wavelengths (radio, infrared, optical) is modeled to come from synchrotron radiation of the energetic electrons in the jet. We find flat to inverted radio spectra that extend from the radio up to about the optical band. For magnetic field strengths of the order 10⁵–10⁶ G at the base of the jet, the calculated spectra agree well in slope and flux with the observations.     

新型Al-Li-Cu-Mg合金蒙皮拉伸成形特性试验研究

随着新型Al-Li-Cu-Mg合金蒙皮在航空航天等高技术工业的应用日益广泛,新型Al-Li-Cu-Mg合金蒙皮拉伸成形特性已成为新型Al-Li-Cu-Mg合金板蒙皮成形质量精确控制以及蒙皮设计迫切需要解决的关键问题.因此,首先获得了新型T8态Al-Li-Cu-Mg合金的最佳热处理工艺参数;其次,采用试验方法,研究了不同热处理状态的拉伸成形过程,揭示了新型Al-Li-Cu-Mg合金板材的拉伸成形特性.发现通过固溶处理,后续时效能够显著提高新型T8态Al-Li-Cu-Mg合金材的拉形能力;在新型A1-Li-Cu-Mg合金板材拉形过程,桔皮现象主要出现在补拉阶段,蒙皮悬空区应变值＞0.0215时,板材表面将出现桔皮,且与材料热处理状态无关.