Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

弹载引信电控扫描识别目标方位的方法

研究了弹载引信电控扫描识别目标方位的一种方法，该方法是：首先研究一种周期电控脉冲起动单刀四掷微波开关，该开关又逐次起动可瞄准定向天线的每一元和它们的公共收发系统。因而该系统既能全向搜索空中目标，又能分区截取回波信号，由此获得引信天线电控扫瞄形式的可瞄准探测系统。     

卫星微波遥感定标技术

在简要论述微波遥感定标技术工作特点的基础上，着重分析星载有源微波遥感定标技术基本原理和关键技术，比较了各种定标方法特点，提出了若干建议。     

微波衰减测量过程失控的原因分析及解决方案

针对高频串联替代法微波衰减测量标准装置测量过程所出现的失控现象 ,从测量标准仪器、被测仪器、测量方法、人为因素等方面分析了失控的原因 ,制定并实施了相应的解决方案 ,使测量过程恢复到统计受控状态     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

NIM4#铯冷原子喷泉钟新一代时间频率基准

回顾了NIM4 #钟实现 5 μK冷原子云 ,74cm原子喷泉和 0 95Hz线宽Ramsey跃迁实验 ,报道了 9 19GHz微波锁定到铯原子秒定义跃迁 ,频率稳定性达到 (5 - 7)× 10 -15(15 0 0 0s)。目前我们正在进行不确定度评估 ,可望不确定度进入 10 -15量级 ,建立我国新一代时间频率基准装置。     

基于BDS-2/BDS-3联合处理的北斗超快速钟差预报优化策略

针对北斗卫星导航系统(BDS)钟差预报产品无法满足高精度快速服务需求的现状，提出了一种基于BDS-2/BDS-3联合估计的超快速卫星钟差预报优化策略。区别于传统两步法预报模型，利用稀疏建模方法一步求解所有模型项，并通过BDS-2/BDS-3星间相关性实现了模型系数解的增强；为进一步降低模型残差的影响，基于残差序列时空相关性，利用半变异函数重构了模型估计的权阵。为验证提出的钟差预报模型，设计了12套对比方案，实验结果表明：基于稀疏建模的钟差模型参数一步估计可略微提高钟差预报精度；通过引入星间相关性对随机模型进行精化，钟差序列一步建模可分别将BDS-2与BDS-3卫星钟差18h预报精度提升28.6%与27.2%；基于半变异函数建模的模型残差相关性提取，可实现BDS-2与BDS-3预报钟差精度8.0%与11.1%的提升。因此，提出的优化策略对当前北斗超快速卫星钟差预报产品精化具有重要意义。     

太阳微波爆发精细结构与硬X射线耀斑的相关

北京天文台在２．８４ＧＨｚ频率上观测到的带短时标精细结构的微波爆发与日本ＹＯＨＫＯＨ卫星上ＨＸＴ在１９９１年１０月－１９９２年１２月观测到的硬Ｘ射线爆发（ＨＸＢ）事件作了比较，发现在２０个微波精细结构爆发事件只有１２个与ＹＯＨＫＯＨ卫星记录的ＨＸＢ有对应关系．本文对１９９２年６月７日典型事件中２．８４ＧＨｚ与ＨＸＢ共同存在的百秒量级的准周期振荡作了分析及源区参数的计算，并作了简要的讨论．     

Ku波段波导扫频双六端口网络分析仪

介绍研制的一种实用Ku波段扫频双六端口网络分析仪。该仪器能同时测量双口网络的4个散射参数及单口网络的复反射系数。     

六端口微波测量技术

六端口技术是从70年代初发展起来的一项新的微波自动测量技术。经过十多年来各国科技工作者的研究、实践,无论在理论上,还是在系统构成、误差分析等方面均趋于成熟。该技术目前已广泛应用于微波计量、安全防护和工业在线检测诸部门。由六端口网络组成的自动网络分析仪,可望成为技术性能高的自动测试系统。本文分四个部分,系统地介绍了六端口技术的发展及其在微波测量中的应用;几种常用六端口结的组成及其设计准则;六端口自动网络分析仪的校准及其测量方法,以及如何评定六端口网络分析仪不确定度等问题,供从事微波计量测试及有关人员参考。