多向编织碳／碳复合材料力学行为研究

本文综述了作者近十年来在多向编织碳／碳复合材料力学性能研究方面的成果，包括力学模型与强度准则、热应力分析、断裂行为、性能预报与优化设计、超高温试验技术及组织性能与高温退化等内容，并分析了其存在的新问题和解决途径。     

复合材料壳体与喷管的卡环连接结构研究

较详细地对复合材料壳体与喷管卡环连接结构进行了有限元应力,应变分析,对卡环,接头及倒锥等多体接触问题进行研究;对“Ｉ”型及“Ｌ”型卡环结构分别进行了计算和比较,并给出计算结果及结果分析。     

热暴露对B/Al复合材料性能的影响

对经300℃、500℃高温热暴露的B／Al（LF6）复合材料的力学性能进行了研究，实验结果表明材料在300℃下热暴露时，性能下降速度较慢，100h后强度保留率约为76％，延伸率保留率为74％。而在500℃下热暴露时，5h以上强度就有明显降低。高温长时间热暴露后复合材料的断裂也从积累型转变为典型的非累积型断裂。通过透射电镜（TEM）及扫描电镜（SEM）对固态热压制造态和主温热暴露的界面状况进行了分析，认为界面反应是造成B／Al复合材料力学性能下降的主要原因。     

无机填料浓度对端羟基聚丁二烯弹性的影响

本文研究了无机填料NH_4Cl0_4(AP)的浓度对端羟基聚丁二烯(HTPB)单轴拉伸的应力-应变特性、拉伸强度、断裂伸长和拉伸模量的影响.根据Mooney-Revilin方程和非高斯链的弹性统计理论,提出了填充弹性体的半经验交联-缠结-非高斯链三相网络模型.理论计算与实验结果基本一致.用扫描电子显微镜观察了试样断裂面的形态,证实了实验的结论.     

重视课设教学强化能力培养

课程设计是教学中的重要实践环节，在促进学生对课程内容的消化和吸收，培养学生查找、利用资源，锻炼学生综合运用所学知识和技能创造性地解决实际问题等方面，具有重要的意义。以《机械制图》为例，从选题、讲授到评分，探讨了如何在课程设计中培养和提高学生的综合应用能力。     

新型超高强度钢G50热变形与组织性能的关系

研究了新型无钴超高强度钢G50经不同锻造比墩粗锻造后材料的组织及性能的变化情况，并检验该新材料随锻造及热变形的能力。结果表明，该新材料具有非常好的可锻性及热成形性，且不同锻造比锻造并按标准制度热处理后的性能相差不大。     

支持MEMS的CAD/CAE系统结构研究

CAD/CAE技术在MEMS(Micro Electro Mechanical Systems)研究过程中具有非常重要的作用.本文首先介绍了用于MEMS的CAD/CAE技术特点,然后研究了MEMS CAD/CAE系统结构,给出了软件支持工具结构框图,指明了解决其中关键技术的途径.CAD/CAE技术的应用,将提高微型机电系统的设计质量,缩短研制周期,使之及早走向工业化.     

Microstructure,porosity and mechanical properties of selective laser melted AlSi10Mg

Finite element modeling (FEM), microscopy, X-ray computed tomography (CT) and mechanical property tests were used to study the microstructure, porosity and mechanical properties of an AlSi10Mg alloy produced by selective laser melting (SLM). The simulation of the melt pool and thermal history under different energy densities produced an optimized result with an energy density of 44.5 J·mm⁻³. The high cooling rate during the SLM process significantly refined the previous α-Al dendrites. The growth direction of the network-like Al-Si eutectic structure at different orientations confirmed the anisotropic nature of the microstructure. Furthermore, the microhardness, tensile testing and fracture analysis results proved that there were no obvious distinctions in the strength between the transverse and longitudinal directions, and that the ductility was anisotropic, possibly due to the shape and distribution of the pores. The pores measured by X-ray CT at different energy densities confirmed that the sphericity of the pores was inversely related to pores volumes. With optimized processing conditions, the porosity of the selective laser melted sample decreased leading to the improved fabricated fuel system component via SLM.     

Effects of process parameters on mechanical properties of abrasive-assisted electroformed nickel

A cathode mandrel with translational and rotational motion, which was supposed to obtain uniform friction effect on surface, was employed in abrasive-assisted electroforming for revolving parts with complex profile. The effects of current density, translational speed and rotational speed on the deposit properties were studied by orthogonal test. The tensile strength, elongation and micro hardness value were measured to find out how the factors affected the properties. The optimized results show that changes of current density affect the tensile strength of nickel layer most, while translational speed has the most remarkable influences on both elonga-tion and micro hardness. The low rotational speed affects the properties least. In this experiment, a smooth nickel layer with tensile strength 581 MPa, elongation 17%and micro hardness 248HV is obtained by the orthogonal test.     

聚氨酯增韧改性 PISOX 树脂及其复合材料的性能

利用MDI与PTMG-2000制备聚氨酯预聚体,对聚(异氰脲酸酯-噁唑烷酮)树脂(PISOX)进行增韧改性:考察不同I/E、不同预聚体添加量的树脂浇铸体力学性能的变化;并对最优配方进行复合材料力学性能测试和DMTA测试,比较改性前后复合材料力学性能和耐热性能的变化;利用SEM观察改性前后微观形态的变化,推测增韧机理。结果表明,I/E=1.8、添加15%预聚体时树脂浇铸体综合力学性能最优,弯曲强度、弯曲模量、冲击强度分别为60.92 MPa、2 295 MPa、6.40 k J/m2;利用该基体制备复合材料,具有比未改性体系更优异的力学性能和界面性能,且聚氨酯预聚体的引入对树脂在高温下的耐热性能没有明显影响,其玻璃化转变温度均在258℃左右;对比改性前后体系固化物的微观结构,改性后的体系呈两相结构,橡胶相起到吸收冲击能和终止裂纹的作用,有效地提高了材料的韧性。