Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

Manifold structure preservative for hyperspectral target detection

A nonparametric method termed as manifold structure preservative (MSP) is proposed in this paper for hyperspectral target detection. MSP transforms the feature space of data to maximize the separation between target and background signals. Moreover, it minimizes the reconstruction error of targets and preserves the topological structure of data in the projected feature space. MSP does not need to consider any distribution for target and background data. So, it can achieve accurate results in real scenarios due to avoiding unreliable assumptions. The proposed MSP detector is compared to several popular detectors and the experiments on a synthetic data and two real hyperspectral images indicate the superior ability of it in target detection.     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

基于非接触式测量的旋转叶片动应变重构方法

基于叶端定时非接触式测量和振动响应传递比的概念,开展高速旋转叶片动应变重构方法的研究。在频域内推导了叶片任意测点位移与任意测点动应变的传递比,给出了单模态共振下响应传递比关于位移和应变模态振型的解析表达式;建立旋转叶片的三维(3D)有限元模型,开展考虑旋转预应力效应的叶片模态分析,提取位移和应变模态振型,获得任意转速下叶端位移与叶根关键点动应变的传递比。开展高速旋转叶片叶端定时非接触式测量实验,采用周向傅里叶算法对叶端定时信号进行处理,获得叶片在不同转速单模态共振下的叶端位移,结合响应传递比,重构5个旋转叶片的关键点动应变。结果表明:旋转叶片在9000r/min和13000r/min转速下发生1阶共振时,与应变片实测结果相比,叶根处应力最大点、次大点和边缘点3个关键点的动应变平均重构误差均小于15%,验证了旋转叶片动应变重构方法的有效性。     

风扇/压气机周向模态识别中传感器角度偏差的影响

基于任意角度压缩感知(CS)方法分析了传感器安装角度偏差对风扇/压气机周向模态识别重构的影响,设计了一套自适应角度优化程序修正重构误差。利用数值试验探究了传感器角度偏差和数量对周向模态重构结果的影响,研究表明:当角度偏差等级为2.5%时,平均重构误差达到10%以上,若保证重构误差基本不变,将传感器数量从7个增加至25个,仅可以将角度偏差等级放宽至4%。而采用小生境微种群遗传算法进行自适应角度优化,在20 dB信噪比下,通过自适应角度优化可将角度偏差等级从2.5%放宽至10%,降低了传感器安装的精度要求。成功优化了一款冷却风扇在前三阶叶片通过频率下的主要周向声模态重构幅值。自适应角度优化算法有效提升了基于压缩感知的风扇/压气机周向模态重构可靠性。     

刀具声发射信号混沌特征提取及趋势分析

旨在建立一种基于多混沌特征演化分析的刀具磨损状态监测方法,通过计算刀具声发射信号的混沌特性参数分析其磨损趋势。建立首先基于混沌理论分析和描述刀具不同磨损阶段声发射信号的混沌特性,包括：定性描述,即重构相空间的奇异吸引子轨迹和庞加莱截面;定量描述,计算不同时间段声发射信号的关联维数、最大Lyapunov指数等。其次,采用最小二乘回归方法对所计算的混沌参数进行趋势分析。结果表明,声发射信号具有混沌特性,而且关联维数和最大Lyapunov指数演化趋势与刀具的磨损状态具有一定的关联,从而为刀具磨损状态的在线监测和预测提供了新思路。     

基于遗传算法的弧齿锥齿轮动态特性优化设计

基于集中质量法建立了弧齿锥齿轮八自由度弯-轴-扭三维空间动力学模型,在模型中考虑了啮合刚度的时变性、几何传动误差的非线性、齿面侧隙以及支承刚度的非线性.采用Runge-Kutta法对传动系统动态响应进行求解.在此基础上,以啮合周期内动态特性指标——振动加速度均方根作为优化目标函数,使用遗传算法对局部综合法中的齿面控制参数进行优化.在对设计参数进行优化的同时也获得了齿轮副最优加工参数.最终以齿面修形的方式实现了航空弧齿锥齿轮动态特性优化,减小了齿轮传动系统的振动与噪声.      

F-35战斗机气动及隐身特性分析

以F-35战斗机为研究目标,对目标体进行三维外形重建,并对重建后的模型进行气动及隐身特性的计算和分析,首先采用了基于飞机三视图进行轮廓线提取来重建F-35全机理论外形的方法,引入了基于草图跟踪的CATIA三视图的标定,大大地提高了模型重建的精度。其次采用非结构网格对F-35的计算区域进行网格划分,采用EULER方程完成了F-35在亚声速、跨声速及超声速等飞行条件下的流场计算,分析了不同状态下的升力、阻力和大迎角气动特性。最后利用曲面像素法对F-35全机高频雷达目标特性进行了计算,提出了一种基于IGS数据转换格式的隐身计算网格生成方法,比较了不同俯仰角及方位角下的RCS特性曲线,分析了对RCS影响比较大的部件。     

轮盘低周疲劳概率寿命预估模型

为了研究影响轮盘结构寿命预估精度的主要因素,提高模型预测精度,通过对三种材料应变概率寿命模型参数的异方差回归,对某航空发动机风扇盘榫槽部位疲劳寿命分布进行了数值模拟,得到了风扇盘榫槽部位的概率寿命。经与试验结果对比表明,考虑材料疲劳寿命异方差特性比按同方差处理更为合理。等效应变模型对疲劳寿命严重高估,第一主应变模型预测值与试验结果吻合较好。最大剪应变模型预测值介于以上两个模型之间,用峰值拉伸应力代替平均拉伸应力进行修正后最大剪应变模型预测值与试验值吻合良好。