A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

Manifold structure preservative for hyperspectral target detection

A nonparametric method termed as manifold structure preservative (MSP) is proposed in this paper for hyperspectral target detection. MSP transforms the feature space of data to maximize the separation between target and background signals. Moreover, it minimizes the reconstruction error of targets and preserves the topological structure of data in the projected feature space. MSP does not need to consider any distribution for target and background data. So, it can achieve accurate results in real scenarios due to avoiding unreliable assumptions. The proposed MSP detector is compared to several popular detectors and the experiments on a synthetic data and two real hyperspectral images indicate the superior ability of it in target detection.     

Calculation of the transonic dip of airfoils using viscous-inviscid aerodynamic interaction method

A numerical procedure for the calculation of the transonic dip of airfoils in the time domain is presented. A viscous-inviscid aerodynamic interaction method is taken to calculate the unsteady aerodynamic loads. In the present case the integral boundary layer equations are coupled with the Transonic Small Disturbance (TSD) Potential Equation. The coupling between structural motion and aerodynamic loads is carried out using State Space equation. It is solved by State Transition Matrix technique. Results are presented for NACA 64A010 and NLR 7301 airfoils with structural data from Isogai and DLR, respectively. Comparisons show good agreement with other numerical results. Certain deviations of experimental data taken from literature need more insight in the detailed test conditions.     

钣金制件表面的相贯线求作方法

本文提出钣金制件表面相贯线求作的新方法。     

化学镀Ni—P合金等温处理的结构转变

利用电子显微术研究了化学镀Ni—P合金层在260℃等温不同时间的非晶-晶体转变。结果表明,晶体镍首先从非晶态中析出,Ni_3P相亦直接从非晶态中生成,而不经过亚稳过渡相。     

面天线检测数据处理方法的探讨

对面天线检测数据处理方法作了一些有益的探讨。从获取被测物的三维坐标后到获取真正有用的信息这一过程需要经过坐标转换和表面误差计算两个步骤 ,其中坐标转换是关键。在坐标转换方面 ,文中提出了曲面自由拟合、公共点转换和CAD面型转换三种方法 ,阐述了这些方法的数学模型 ,并且用实测数据进行了验证计算。理论分析和实际计算两方面显示 :CAD面型转换法既不需要天线的曲面方程 ,也不需要有已知的公共点 ,结果准确、可靠 ,是一种理想的方法 ;如果没有天线的CAD面型 ,但却存在公共点时 ,公共点转换法也是较理想的方法 ,其结果与给定的公共点误差有关 ;如果既没有天线的CAD面型又无公共点或公共点误差很大时 ,只能采用曲面自由拟合法 ,该法准确度最高 ,但容易使天线面型产生错位现象     

高科技与微型涡轮发动机的研制

在收集、分析国外某些微型涡轮发动机的文献和实物的基础上，结合参加自行设计微型涡轮发动机的体会，提出应用现有的和正在发展中的新技术、新材料、新工艺，将对微型涡轮发动机的性能和研制周期产生较大的影响。     

钛的相变织构及其影响因素研究

通过晶体学取向分布函数（ＣＯＤＦ）法研究了冷轧形变量、再结晶退火和相变循环次数等因素对钛相变织构形成的影响。结果表明冷轧形变量对相变织构的形成影响最大。再结晶退火后钛的相交织构漫散。多次循环相变并不改变相变织构的类型。     

DO 28飞行试验数据一致性检验

 本文研究DO28试验机飞行试验数据一致性检验及其误差校正。建立了由非线性运动学方程及内容广泛的校正环节构成的一致性检验模型,解决了大地风场重构、测量信号时间延迟估计、ψ转换及测量控制信号的校正。为DO28参数估计提供了可靠、准确的飞行试验数据。     

基于μ分析的高超声速飞行器再入轨迹评估

为解决高超声速飞行器再入过程中存在的不确定性问题,将μ分析理论应用到标称再入轨迹的评估中.采用线性稳定储备准则,在密度、升力系数和阻力系数存在不确定性时,对标称轨迹在制导律下的制导稳定性进行了分析;根据所获得的最坏参数组合,采用系统的开环尼克尔斯曲线验证了μ分析的结果;分析了系统所能容纳的最大不确定性参数,并研究了系统对不同不确定性参数的敏感性.结果表明:在密度、升力系数和阻力系数不确定性中,阻力系数对该标称轨迹的鲁棒稳定性影响最为明显.