Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

改性双基低特征信号推进剂研究进展

综述了国外改性双基低特征信号推进剂研究的最新进展，提出了改性双基推进剂实现低特征信号并提高性能的主要技术途径和性能指标，重点介绍了几种含有新型含能材料、新型燃速改良剂和新型键合剂的改性双基低特征信号推进利配方。     

回归设计铝合金7075微弧氧化形膜控制及膜特性

通过二次回归通用旋转组合设计了铝合金7075微弧氧化实验,建立了回归模型,量化了对陶瓷膜的多变量互约组合的影响趋势,解决了对生长陶瓷膜可预测、可控制的工艺。通过工艺特性曲线、金相分析、X射线衍射、扫描断层分析、摩擦磨损实验等手段,对形成的陶瓷膜特性进行了分析。结果表明:采用回归设计铝合金7075微弧氧化工艺是可行有效的,可在很大范围内调节陶瓷膜的微观和宏观结构,调节陶瓷膜相的比例关系,获得防腐、耐磨、电绝缘等高品质陶瓷膜。     

Micro-mechanical model for predicting the elasto-plastic behavior of composites based on secant formulation method

To predict the Elasto-Plastic Behaviors (EPBs) of aligned inclusions reinforced composites, this paper develops an interpolative Mori-Tanaka/Double-Inclusion (MT-DI) homogenization model with the secant formulation, and gives the numerical implementation algorithms of the developed MT-DI model with the secant formulation. The Finite Element (FE) homogenization method is implemented to provide the “exact” EPBs of the composites and thus validate the MT-DI model with the secant formulation. The MT-DI model with the 2nd-order secant formulation is validated to provide the more accurate predictions, while the MT-DI model with the 1st-order secant formulation always gives the stiffer predictions. The results show that using the macro-stress and macro-strain as the inputs, the MT-DI model with the secant formulation gives the identical predictions. The predictions of the MT-DI model with the secant formulation vary between those of the MT and DI models with the secant formulation. Meanwhile, the MT-DI model with the secant formulation does not predict the accurate EPBs for the phases of the composites.     

一类递归序列的稳定性和振动性

研究了递归序列x_(n 1)α-β_(n-1)/1-g(x_n),n=0,1,的持久性、振动性、稳定性和全局吸引性。其中α、β为正实数,g(x)是非负连续函数。     

雨流计数的递归算法

给出了疲劳分析中雨流计数法的另一种等效解释。在这个解释的基础上,提出了雨流计数的递归算法。该算法将包含多于一个应力峰值点的任意载荷 时间历程以两个谷值点为界分解成3个子段,每个子段用递归方法继续分解成3个更短的子段,直至每个子段仅包含一个峰值点或不包含峰值点为止。分解得到的仅包含一个峰值点的任意子段对应一个子循环,其应力的最大值和最小值在递归分解过程中可以同时算出。该算法不需像其他雨流计数算法那样在剔除局部子循环的峰、谷点数据后重新整理载荷 时间历程,也能保留各应力子循环出现的先后次序信息,且最先分离出来的可以是变程最大的应力循环。算法的缺点是不适合实时疲劳损伤计算,且算法在实现时需要计算机为其堆栈分配较多的存储器空间。     

基于空间相关函数的二维紊流场数值生成法

大气紊流是复杂的扰动形式,影响飞行品质、飞行安全。对于复杂的飞行任务,有必要生成二维紊流场模型,从而更准确地反映扰动情况。传统方法是以时间频谱为基础,利用谱分解定理得到所需的成形滤波器结构,进而生成紊流递归模型。这种方法需要经过对模型进行简化,以便利用谱分解定理,使仿真模型的统计特性受到影响;另外,从理论上讲,传统方法只能生成一维大气紊流递归模型。本文直接从空间相关函数入手,提出建立离散自递归模型的新方法,给出了二维紊流场的递归模型     

ARMAX模型参数估计的新两步法

 本文提出了一种ARMAX模型参数估计的新两步法。这种方法与其它递推估计方法（如增广矩阵法,极大似然法,Durbin两步法、三步法等）比较,具有较好的收敛特性,对参数的估计,特别是对C参数的估计比较精确,这是利用其它方法,一直未能很好解决的一个难题。     

基于多体系统动力学的旋翼桨叶响应计算方法

在中等变形梁的基础上引入增广转换矩阵,为解决桨叶动能项推导编程计算较为复杂的问题,建立了一种新的递推计算方法。该方法在原有的转换矩阵基础上进行了增广,建立了相邻运动坐标系间动能项引起的质量、阻尼、刚度和广义力递推计算方法。以法国SA349/2小羚羊直升机的试飞测试数据为依据,验证了方法的有效性。     

高超侧压进气道前/后掠的数值分析和比较

侧板构型和唇口位置是影响侧压式进气道性能的关键参数。选取了5个具有一定代表性的状态点对前/后掠进气道模型进行了计算和分析,重点比较了当侧板前/后掠时进气道的流量系数、压升、出口气流均匀度等性能。通过对比分析,发现侧板前掠时进气道的流量系数、压升大于侧板后掠结果,且进气道出口流场更均匀。当马赫数较低时,前/后掠进气道性能差别比较明显:同为50%溢流窗,来流马赫数4时,侧板前掠的进气道流量系数比侧板后掠的情形高出7.7%;而当来流马赫数为8.09时,侧板前掠的进气道流量系数仅高2.6%。