进气道喘振诱发因素及其可靠性分析

针对飞机进气道的典型故障-喘振的诱发因素进行全方位的分析论证，并为从事航空工程的人员提供一种对动力装置整体性能进行可靠性评估方案，篇末对世界上比较先进的进气道气动设计思想及其喘振机理进行分析，可以为飞机设计师在设计飞机过程中具体分析问题提供一定的参考。     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).     

典型工况下低排放燃烧室的压力振荡特性

为了研究低排放燃烧室在典型工况下的压力振荡特性,针对模型燃烧室进行了燃烧自激振荡特性试验.在试验中测量了采用贫油预混预蒸发(LPP)燃烧技术的低排放燃烧室在典型工况下的压力振荡频率和幅值,在燃烧室进口压力为1.10～2.77MPa、燃烧室进口温度为656～845 K、燃烧室压降为3.41％～4.35％范围内,分析了燃油粒径变化对振荡特性的影响.分析结果表明:局部当量比脉动是引发燃烧不稳定的因素之一.通过计算燃油二次雾化状态下的液滴最大粒径,发现燃油液滴粒径的变化对主燃级出口处的局部当量比脉动有直接影响,从而引起燃烧室压力振荡幅值和频率的变化.     

Flapping wing micro-aerial-vehicle:Kinematics,membranes, and flapping mechanisms of ornithopter and insect flight

The application of biomimetics in the development of unmanned-aerial-vehicles (UAV) has advanced to an exceptionally small scale of nano-aerial-vehicles (NAV), which has surpassed its immediate predecessor of micro-aerial-vehicles (MAV), leaving a vast range of development possi-bilities that MAVs have to offer. Because of the prompt advancement into the NAV research devel-opment, the true potential and challenges presented by MAV development were never solved, understood, and truly uncovered, especially under the influence of transition and low Reynolds number flow characteristics. This paper reviews a part of previous MAV research developments which are deemed important of notification; kinematics, membranes, and flapping mechanisms ranges from small birds to big insects, which resides within the transition and low Reynolds number regimes. This paper also reviews the possibility of applying a piezoelectric transmission used to pro-duce NAV flapping wing motion and mounted on a MAV, replacing the conventional motorized flapping wing transmission. Findings suggest that limited work has been done for MAVs matching these criteria. The preferred research approach has seen bias towards numerical analysis as com-pared to experimental analysis.     

挂滴燃烧中的微汽泡行为和液滴跳动

利用高速显微摄像技术,观察研究了RP-3微尺度挂滴燃烧过程中,微汽泡的核化、生长、聚并和溢出的行为过程及液滴跳动现象.结果得出:①液滴中微汽泡产生的位置;②在蒸发初期时由微汽泡引起液滴体积的膨胀;③在燃烧中由汽泡行为导致液滴的跳动;④液滴燃烧的稳定(不爆裂)现象.分析了表面张力在挂滴燃烧过程中的作用,确定了挂滴稳定燃烧的临界条件下的临界特征体积在2.5~5.0μL.      

压电致动器扑翼结构动力学仿真

采用传统扑动机构的微型扑翼,气动效率低、扑动能耗大。采用压电致动器的微型扑翼通过压电材料进行致动使机翼产生上下扑动,有效地将扑动机构和机翼两个主要系统进行集成,不仅节省重量,同时它具有任务变形自适应能力强、气动效率高和扑动能耗小的特点。通过PCL语言建立采用压电致动器的扑翼有限元模型,结合同尺寸扑翼气动力试验数据,进行采用压电致动器扑翼结构仿真。利用仿真结果研制采用压电致动器扑翼原理样机,研究表明,采用压电致动器后扑翼扑动频率得到明显提高,压电片可有效控制机翼的弯扭变形,有助于提高扑翼的气动效率。     

冲压发动机燃烧室压力脉动对进气道的影响分析

冲压发动机燃烧室燃烧时产生的振荡会以声波的形式对进气道结尾激波产生干扰。本研究采用数值方法模拟了不同燃烧室压力脉动频率和振幅对进气道工作状态的影响情况。计算模型为轴对称混压式进气道,控制方程采用雷诺平均N-S方程,湍流模型为标准k-ε模型。求解时时间推进采用二阶隐式格式,空间离散采用AUSM格式。计算结果表明,燃烧室压力振荡频率越大进气道结尾激波运动幅度越小,而振荡幅值越大进气道结尾激波的运动幅度越大。     

Dynamics of Coronal Loop Oscillations Recent Improvements and Computational Aspects

We will discuss the observed, heavily damped transversal oscillations of coronal loops. These oscillations are often modeled as transversal kink oscillations in a cylinder. Several features are added to the classical cylindrical model. In our models we include loop curvature, longitudinal density stratification, and highly inhomogeneous radial density profiles. In this paper, we will first give an overview of recently obtained results, both analytically and numerically. After that, we shed a light on the computational aspects of the modeling process. In particular, we will focus on the parallellization of the numerical codes.     

EXPERIMENTAL INVESTIGATION ABOUT THE UNSTEADY AERODYNAMIC CHARACTERISTICS OF WINGS

ＥＸＰＥＲＩＭＥＮＴＡＬＩＮＶＥＳＴＩＧＡＴＩＯＮＡＢＯＵＴＴＨＥＵＮＳＴＥＡＤＹＡＥＲＯＤＹＮＡＭＩＣＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＯＦＷＩＮＧＳＹｕＸｉｎｚｈｉ；ＹａｎｇＹｏｎｇｎｉａｎ；ＷｕＺｅ（Ａｉｒｃｒａ．ｆｔＥｎｇｉｎｅｅｒｉｎｇＤｅｐａ...     

振荡燃烧过程的同步测量方法

振动燃烧是由非稳定燃烧放热和压力脉动互相耦合产生的系统振荡过程。振荡燃烧的研究方法之一是对自激振荡燃烧相互耦合过程进行研究,得到系统的闭环特性。另外还可以对燃烧系统施加特定的扰动以得到燃烧系统的开环特性。为了研究振荡燃烧的动态过程,需要实现不同物理量的同步测量。相同步方法能够实现压力脉动与燃烧放热率脉动的同步测量,确定二者间的周期变化关系。通过对两个不同振荡类型的实验台进行相同步测量,分析振荡燃烧过程中压力脉动与放热率脉动的相位关系,并讨论了相同步方法的误差,提出了不同实现方案。这些结果将有助于我们提高火焰测量的相同步技术的准确性。