K8、JK8机翼接头与检验量规协调准确度的提高

分析了 K8、 JL8机翼接头孔精加加后与检验量规位置协调的条件，介绍了为提高它们之间协调准确度所采取的措施及其效果。     

增加纵向隔板解决推进剂晃动稳定问题

某型三级运载火箭为短粗结构，在研制过程中曾发生第三级推进剂晃动不稳定问题。分析认为，这是运载火箭的则体结构与推进剂晃动强烈耦合所致。为解决不稳定问题，提出在推进剂箱中增加纵向隔板，分别以４５°，９０°分隔。分析和试验表明，这种方法能提高推进剂的晃动频率，减小晃动质量，但结构复杂。主题词     

炭/炭复合材料防氧化涂层研究进展

介绍了近两年国内外开发的几种C/C复合材料高性能抗氧化涂层的微观结构和高温氧化行为,表明SiC-Al2O3-莫来石、SiC晶须增韧陶瓷、硅酸钇等涂层1500℃静态空气环境下均具有长时间防氧化能力,部分涂层还具有优良的抗热震性能。其中采用原位形成法制备的硅酸钇涂层具有极佳的抗氧化性能,可在1600℃空气中对C/C复合材料有效保护200 h。此外,还介绍了部分涂层的失效机理,并就C/C复合材料抗氧化涂层下一步研究重点提出一些见解。     

自适应天线互耦影响研究

用等效网络法推导了考虑互耦影响时阵列的输出信号解析式和信噪比,仿真了不同阵元间距时,自适应直线阵的方向图和输出信噪比,得到了一些有用的结论。     

INS／GPS组合导航系统的容错研究

本文研究了INS/GPS组合导航系统的容错问题,并提出了一个两级故障检测及分离方案。通过采用该方案,INS/GPS组合导航系统将具有较高的容错能力,并能为用户提供连续、精确的导航信息。     

新型高推比涡轮风扇发动机盘时耦合振动分析

本文将群论算法和动态子结构技术结合起来，并采用计算效率极高的Ｂｅｎｆｉｅｌｄ－Ｈｒｕｄａ的模态代入变换法，分析了某型发动机压气机的叶片／轮盘耦合系统的振动特性，计算了该叶片／轮盘耦合系统的前５阶振动频率和振型．根据叶片／轮盘耦合系统的共振条件进行共振分析，确定该发动机压气机有可能发生叶片／轮盘耦合共振．     

计算机辅助任意多边形排料

 本文描述了一种计算机辅助排料的算法。它能自动处理二维不规则形状物体的排料。排料的处理过程分为两个阶段。现介绍的为第一阶段的算法。计算实例表明,该方法可以明显减少计算量。并具有原材料利用率高的特点。 飞机蒙皮等钣金件的下料就涉及到大量的排料问题,在整张的金属板材上排成所需要的零件形状。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

Experimental Aspects of Mid-Frequency Pulsations (f≈10–100 mHz) in the Southern Polar Cap

We review the results obtained in the frequency range of Pc3 (22-100 mHz) and Pc4 (7-22 mHz) pulsations at Italian Antarctic stations in the southern polar cap (“Mario Zucchelli”, at Terra Nova Bay, TNB, 80^˚.S; “Concordia”, the Italian/French base at Dome C, DMC, 89^˚.S). The absence of a midnight enhancement in the pulsation power suggests a negligible substorm influence at extreme latitudes, while the sharp noon enhancement, which appears only at TNB, is determined by the closer proximity of the station to cusp related phenomena. The relationship between the frequency of the band-limited signals and the interplanetary magnetic field strength, the cone angle influence, and the higher correlation of the Pc3 power with the solar wind speed in the morning hours suggest a global scenario in which upstream waves would be mainly responsible for the mid-frequency activity in the polar cap. However, the polarization pattern is odd with respect to the predictions for tailward propagating modes.