Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

Sc在L10-TiAl金属间化合物中占位的理论研究

基于密度泛函理论,运用第一原理赝势平面波方法,采用CASTEP量子力学能量软件包研究了Sc占据Ti位与Sc占据A l位的超胞晶格常数、原子形成热、超胞总态密度与电子密度差分图,两种情况对比下,在L10-TiA l合金中,Sc优先占据Ti位,这一结论为进一步研究三元系TiA l-Sc合金提供了理论研究的基础。     

干式变压器数据采集与控制系统的设计

介绍了一种基于V/F变换的高精度干式变压器数据采集与控制系统 ,采用LM2 3 1A/F变换芯片和89C5 2单片机实现工业现场测量对象的A/D转换。V/F变换器具有高精度 ,高线形度 ,且外围电路简单的特点。采用单片机直接与V/F变换器连接进行A/D转换 ,不需要额外的硬件电路 ,充分利用硬件资源 ,精心设计软件 ,系统分辨率可达 12位 ,转换精度可达 0 .0 2 %。当传感器与上位机距离较远时 ,可以采用RS -4 85接口或无线数据发送 /接收模块实现远距离的数据通信     

基于MSP430汽车防抱死制动控制器的设计

介绍了一种汽车防抱死制动系统控制器的设计。控制器以MSP430F149单片机为核心,根据防抱死制动系统的工作原理,利用轮速传感器,对轮速进行滤波、放大、整形等实现车轮速度的采集。采用基于车轮滑移率的防抱控制理论,根据车速、轮速来计算车轮滑移率。在硬件设计方面,根据系统选择了MSP430F149单片机,设计出信号输入回路、输出驱动回路、电源部分,给出了系统结构原理图。     

数字化机载环控地面检测系统的研究

通过采用两片PIC18F448及其外围器件实现了机载环控地面检测系统的数字化设计。通过I^2C总线实现两片单片机之间的数据传输与协调，并利用其CAN接口模块实现多套检测系统的网络化和远程控制操作。     

复合材料锥壳0°铺层的自动铺放成型方法研究

研究了一种基于自动铺带技术的复合材料锥壳0°铺层成型方法：根据锥壳构件尺寸将等宽预浸带数控分切成预定尺寸的直角梯形预浸带片，按特定方式铺放到锥壳表面并使每两片拼成一个等腰梯形单元，多个等腰梯单元形构成锥壳的0°铺层；并针对这种成型方法设计了一种实现锥壳0°铺层自动成型的装置。采用该方法及其设备可以实现锥壳0°铺层的自动化制造，提高成型效率、降低废料率、稳定工艺质量，降低装备制造成本。     

Topological defects and highest energy cosmic and gamma rays

In this paper we review the hypothesis that a substantial part of the cosmic ray flux observed above about 10¹⁹ eV may be produced by decaying or annihilating topological defects left over from phase transitions in the early universe at grand unification energy scales ( 10¹⁶ GeV). Possible signatures of cosmic ray producing defect models are discussed which could be tested experimentally in the near future. We thereby focus on model independent universal spectral properties of the predicted particle fluxes.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

一种2812内部FLASH程序远程更新的新方法

仿真器连接DSP进行程序升级给软件维护带来巨大麻烦.利用TMS320F2812芯片的内部丰富资源和支持在线编程的特点,介绍一种应用软件远程更新方法.包括一个通用的BOOT程序和两种生成可烧写文件的方法,满足了TMS320F2812产品的应用开发以及更新维护等需求.方法已应用于多个产品研制中,实验结果表明方法操作方便、加载结果稳定可靠.     

轴向力作用两端支承梁的固有特性和稳定性分析

推导了轴向力作用下的两端支承梁的运动微分方程,以两端支承梁的振型函数为假设振型函数,分析了不同扭转弹簧刚度下轴向力变化对梁固有频率的影响,导出了两端支承梁在临界轴向力作用下的解析表达式,讨论了扭转弹簧刚度对梁临界轴向力的影响特性.