Digisonde observations of TIDs with frequency and angular sounding technique

A technique for studying ionospheric wavelike phenomena, primarily AGW/TID events, is developed based on the solution of the problem of radio wave propagation in ionospheric plasma disturbed by wavelike processes. A perfectly reflecting surface model is used for representing TIDs propagating at ionospheric heights. This technique is a generalization of the Frequency-and-Angular Sounding (FAS) method developed earlier for oblique TID diagnostics using transmitters of opportunity. Trial measurements were made in November 2003 with two DPS-4 systems at Millstone Hill Observatory, providing experimental validation of the developed method by comparing the results of disturbance diagnostics to those simultaneously obtained with the original (oblique) FAS method. The TID parameters recovered during the November 2003 campaign suggest that the observed disturbances predominately propagated equatorward which likely indicates their sources to be in the auroral region. The equatorward propagating AGW/TIDs are typical for disturbed geomagnetic conditions which were observed during the campaign. Implementation of the generalized FAS technique in the DPS sounder allowed development of a dedicated data acquisition system for ionospheric disturbance diagnostics. Routine measurements with the developed technique using the existing world-wide network of Digisondes (GIRO) will make it possible to conduct large-scale studies of the AGW/TID phenomena.     

Comparing topside and bottomside-measured characteristics of the F2 layer peak

The ionospheric characteristics of the F2 layer peak have been measured with ionosondes from the ground or with satellites from space. The most common characteristics are the F2-peak density NmF2 and peak height hmF2. In addition to these two parameters this paper studies the F2-peak scale height. Comparing the median values of hmF2 and NmF2 obtained from topside and bottomside sounding shows good agreement in general. The Chapman scale height values for the F2 layer peak derived from topside profiles, H_m,top, are generally several times larger than H_m,bot derived from bottomside profiles.     

The influence of the spatial and temporal collocation windows on the comparisons of the ionospheric characteristic parameters derived from COSMIC radio occultation and digisondes

GPS radio occultation (RO) ionospheric products obtained by Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) mission during the year of 2014 and the observations from 3 digisonde stations which are located at different latitudes are used to study the influence of different time and space collocation windows on the comparisons of the ionospheric characteristic parameters (ICPs), including the peak density and peak height, derived from the two techniques. The results show that the correlation coefficients (CC) and the standard deviation of the absolute biases (SDAB) between the ICPs derived from the two techniques vary distinctly under different spatial and time collocation windows. Generally, the CC (SDAB) of the ICPs decrease (increase) as the size of the collocation window increases in time dimension or in space dimension. The rate of change of the statistic parameters with the increase in the size of the collocation window in time dimension and space dimension is analyzed for each digisonde station. It is found that within the collocation window of $\left(60\mathrm{m}\mathrm{i}\mathrm{n},{20}^{°},{20}^{°}\right)$, the influence of the increase of $1^{°}$ in the space window on the statistical comparison is much more significant than that of the increase of 1?min in the time window, and it is suggested that there can be appropriate relaxation on the time window within the threshold of 60?min to get a balance between the quality of the comparison results and the number of the matched pairs. In addition, it is found that the same variations in the longitude window and in the latitude window may have different influences on the comparison results when the horizontal gradients in electron density are distinctly different along different directions at the digisonde station, and strict space collocation window is preferred when comparing the observations from COSMIC RO with those from the digisonde station in such cases.     

Regular features of the polar ionosphere characteristics from Digisonde measurements over Norilsk

Regular features of the polar ionosphere have been studied using its local empirical model of the electron density distribution in the bottomside ionosphere. The local empirical model was derived from the hand-scaled ionogram data recorded by DPS-4 Digisonde at Norilsk, Russia (69.4N, 88.1E; 60N GLAT, 166E GLON) for a 6-year period from December, 2002 to December, 2008. The paper describes the technique used to build the local empirical model and discusses its diurnal, seasonal, and solar activity specifications in comparison with the standard IRI-2007 climatological model for the same period of time, long-term observations from the European Incoherent Scatter UHF radar (1988–1999), and the high-latitude ionosondes data. Primary focus of the paper is behavior of the three F2 layer parameters: the F2 peak density (NmF2), the peak height (hmF2) and the bottomside thickness (B0). Special emphasis of the paper is the analysis of the winter anomaly manifestation at Norilsk and the peculiar diurnal–seasonal behavior of hmF2 under low solar activity, named as a “polar day effect”.     

An analysis of the topside ionosphere parameters based on the long-duration Irkutsk incoherent scatter radar measurements

The topside ionosphere parameters are studied based on the long-duration Irkutsk incoherent scatter radar (52.9N, 103.3E) measurements conducted in September 2005, June and December 2007. As a topside ionosphere parameter we chose the vertical scale height (VSH) related to the gradient of the electron density logarithm above the peak height. For morphological studies we used median electron density profiles. Besides the median behavior we also studied VSH disturbances (deviations from median values) during the magnetic storm of September 11th 2005. We compared the Irkutsk incoherent scatter radar data with the Millstone Hill and Arecibo incoherent scatter radar observations, the IRI-2007 prediction (using the two topside options) and VSH derived from the Irkutsk DPS-4 Digisonde bottomside measurements.     

Radio occultation electron density profiles from the FORMOSAT-3/COSMIC satellites over the Brazilian region: A comparison with Digisonde data

This study aims to validate the electron density profiles from the FORMOSAT-3/COSMIC satellites with data from Digisondes in Brazil during the low solar activity period of the years 2006, 2007 and 2008. Data from three Brazilian Digisondes located in Cachoeira Paulista (22.7°S, 45°W), São Luís (2.5°S, 44.2°W) and Fortaleza (3.8°S, 38°W) were used in the comparisons. Only the profiles whose density peak have been obtained near the stations coordinates were chosen for the comparison. Although there is generally good agreement, some cases of discrepancies are observed. Some of these discrepancies cannot be explained simply by the differences in the position and local time of the measurements made by the satellite and the ground-based station. In such cases it is possible that local conditions, such as the presence of a trans-equatorial wind or electron density gradients, could contribute to the observed differences. Comparison of the F2 layer peak parameters, the NmF2 and hmF2, obtained from the two techniques showed that, in general, the agreement for NmF2 is pretty good and the NmF2 has a better correlation than hmF2. Cachoeira Paulista had the worst correlation for hmF2 possibly because this station is situated in the region under the influence of the equatorial ionization anomaly, a region where it is more difficult to apply the RO technique without violating the spherical symmetry condition.     

Comparative study of high-latitude,mid-latitude and low-latitude ionosphere on basis of local empirical models

The analysis of the regular features of the high-, mid- and low-latitude ionosphere characteristics has been carried out using local empirical models. The local empirical models were derived from the manual scaled ionogram data recorded by DPS-4 Digisondes located at Norilsk (69 N, 88E), Irkutsk (52 N, 104E) and Hainan (19 N, 109E) for a 6-year period from December, 2002 to December, 2008. The technique used to build the local empirical model is described. Primary focuses are diurnal, seasonal and solar cycle variations of the peak electron density and the peak height under low solar activity and their changes with increasing solar activity. The main objective of the paper is to reveal both common and specific features of high-, mid- and low-latitude ionosphere. Based on earlier comparisons with the International Reference Ionosphere model, we analyze how the common and specific features are reproduced by this model.     

Development of a campaign to study equatorial ionospheric phenomena over Guam

The United States Air Force Academy (USAFA) is in the process of developing a series of ground-based and space-based experiments to investigate the equatorial ionosphere over Guam and the southern crest of the Equatorial Appleton Anomaly over New Guinea. On the ground the Digital Ionospheric Sounder (University of Massachusetts, Lowell DPS-4 unit) and a dual-frequency GPS TEC/scintillation monitor will be used to investigate ionospheric phenomena in both campaign and long-term survey modes. In campaign mode, we will combine these observations with those collected from space during USAFA’s FalconSAT-3 and FalconSAT-5 low Earth orbit satellite missions, which will be active over a period of several years beginning in the first quarter of the 2007 calendar year. Additionally, we will investigate the long-term morphology of key ionospheric characteristics useful for driving the International Reference Ionosphere, such as critical frequencies (f_oE, f_oF1, f_oF2, etc.), the M(3000) F2 parameter (the maximum useable frequency for a signal refracted within the F2 layer and received on the ground at a distance of 3000 km away), and a variety of other characteristics. Specific targets of investigation include: (a) a comparison of TEC observed by the GPS receiver with those calculated by IRI driven by DPS-4 observations, (b) a comparison of plasma turbulence observed on-orbit with ionospheric conditions as measured from the ground, and (c) a comparison between topside ionospheric satellite in situ measurements of plasma density during an overpass of a Digisonde versus the calculated value based on extrapolation of the electron density profiles using Digisonde data and a topside α-Chapman function. This last area of investigation is discussed in detail in this paper.     

Evaluation of the improvement of IRI-2016 over IRI-2012 at the India low-latitude region during the ascending phase of cycle 24

This paper investigated the performance of the latest International Reference Ionosphere model (IRI-2016) over that of IRI-2012 in predicting total electron content (TEC) at three different stations in the Indian region. The data used were Global Positioning System (GPS) data collected during the ascending phase of solar cycle 24 over three low-latitude stations in India namely; Bangalore (13.02°N Geographic latitude, 77.57°E Geographic longitude), Hyderabad (17.25°N Geographic latitude, 78.30°E Geographic longitude) and Surat (21.16°N Geographic latitude, 72.78°E Geographic longitude). Monthly, the seasonal and annual variability of GPS-TEC have been compared with those derived from International Reference Ionosphere IRI-2016 and IRI-2012 with two different options of topside electron density: NeQuick and IRI01-corr. It is observed that both versions of IRI (i.e., IRI-2012 and IRI-2016) predict the GPS-TEC with some deviations, the latest version of IRI (IRI-2016) predicted the TEC similar to those predicted by IRI-2012 for all the seasons at all stations except for morning hours (0500 LT to 1000?LT). This shows that the effect of the updated version is seen only during morning hours and also that there is no change in TEC values by IRI-2016 from those predicted by IRI-2012 for the rest of the time of the day in the Indian low latitude region. The semiannual variations in the daytime maximum values of TEC are clearly observed from both GPS and model-derived TEC values with two peaks around March-April and September-October months of each year. Further, the Correlation of TEC derived by IRI-2016 and IRI-2012 with EUV and F10.7 shows similar results. This shows that the solar input to the IRI-2016 is similar to IRI 2012. There is no significant difference observed in TEC, bottom-side thickness (B0) and shape (B1) parameter predictions by both the versions of the IRI model. However, a clear improvement is visible in hmF2 and NmF2 predictions by IRI-2016 to that by IRI-2012. The SHU-2015 option of the IRI-2016 gives a better prediction of NmF2 for all the months at low latitude station Ahmedabad compare to AMTB 2013.     

Reconstruction of topside density profile by using the topside sounder model profiler and digisonde data

To improve the accuracy of the real time topside electron density profiles given by the Digisonde software a new model-assisted technique is used. This technique uses the Topside Sounder Model (TSM), which provides the plasma scale height (H_s), O⁺–H⁺ transition height (H_T), and their ratio Rt = H_s/H_T, derived from topside sounder data of Alouette and ISIS satellites. The Topside Sounder Model Profiler (TSMP) incorporates TSM and uses the model quantities as anchor points in construction of topside density (Ne) profiles. For any particular location, TSMP calculates topside Ne profiles by specifying the values of foF2 and hmF2. In the present version, TSMP takes the F2 peak characteristics – foF2, hmF2, and the scale height at hmF2 – from the Digisonde measurements. The paper shows results for the Digisonde stations Athens and Juliusruh. It is found that the topside scale height used in Digisonde reconstruction is less than that extracted from topside sounder profiles. Rough comparison of their bulk distributions showed that they differ by an average factor of 1.25 for locations of Athens and Juliusruh. When the Digisonde scale heights are adjusted by this factor, the reconstructed topside profiles are close to those provided by TSM. Compared with CHAMP reconstruction profiles in two cases, TSMP/Digisonde profiles show lower density between 400 and 2000 km.