Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

一种基于虚拟页地址映射的NAND Flash管理算法

本文提出了一种基于虚拟页地址映射的NAND Flash管理算法.该算法通过定义坏块表、对应表等结构，以及设计的坏块替换策略和虚拟页地址到实际物理页地址的转换算法，实现上层软件采用虚拟地址对NAND Flash的无坏块连续页地址访问.该算法是一种高效的地址映射算法，能高效地对数据进行索引，占用SRAM空间较少，使系统达到高性能，并使得闪存使用的更加稳定持久.     

求解含多个右端向量非对称线性方程组的自适应块拟最小残量IOM(q)算法

许多实际应用问题需要求解含多个右端向量的大型非对称线性方程组 ,通常是把原来方程组分成单独几个含一个右端向量的方程组 ,再用某种迭代法分别单个求解 ,而更加经济有效的方法是应用能同时产生几个迭代向量的块迭代法来直接求解。本文在 IOM(q)算法的基础上 ,提出一种求解此类方程组的块拟最小残量 IOM(q)算法 ,讨论了如何收缩掉已收敛的部分方程组以及如何从产生的块 Krylov序列中删除线性相关或几乎线性相关向量的自适应技术。数值试验表明 ,此新的自适应块算法比块 GMRES算法及其他相关算法具有更好的收敛行为、更少的计算量和 CPU计算时间 ,是求解此类方程组的一种更加经济有效的算法。     

Astrophysics in 2006

The fastest pulsar and the slowest nova; the oldest galaxies and the youngest stars; the weirdest life forms and the commonest dwarfs; the highest energy particles and the lowest energy photons. These were some of the extremes of Astrophysics 2006. We attempt also to bring you updates on things of which there is currently only one (habitable planets, the Sun, and the Universe) and others of which there are always many, like meteors and molecules, black holes and binaries.     

磁粉检验标准环形试块的机理分析

为了分析控制磁粉检验系统综合性能的标准环形试块的机理，首先建立一个计算漏磁场的简化数学模型，然后解标量磁位的=维拉普拉斯方程，求出被磁化的环形试块上圆孔产生的漏磁场，计算环形试块表面的磁粉受力，分析其特点并得出相应的结论。     

基于特征模型的挠性悬臂板控制

针对航天器上太阳帆板这种悬臂外伸薄板结构的挠性附件 ,存在环境扰动下所引起的振动 ,本文采用压电智能结构作为执行器对悬臂板进行主动振动控制。基于板系统的特征建模 ,并结合自适应控制对挠性板的主动控制进行了研究。通过仿真研究结果与应变律反馈控制比较 ,表明该方法的有效性     

基于扩展块的星载软件控制流容错评价方法

空间环境因素引发的星载软件瞬态的控制流错误可能对系统执行效能造成严重影响，为避免容错算法存储开销和执行开销给系统带入过多的计算压力，提出在容错算法开销和所取得的系统的可靠性提升上取得一定折衷，这是星载软件可靠性设计的合理方向。设计了一种适合于弹性添加容错代码的容错方法：扩展块数字签名的控制流检测方法ESCFC（Extend block Signatures for Control Flow Checking）。由空间高能粒子的实验结果和在轨实测结果为系统可靠度建模，提出了算法开销和可靠性效能提升的平衡关系的工程参考和理论依据。定性分析和模拟，充分说明了将该方法运用于航天工程的可行性。     

用广度优先搜索求割点和块的算法研究

本文在作者以前研究的基础上,进一步提出子树径和独立子树径的概念,深刻分析了在广度优先搜索下简单连通无向图的结构特征,并给出判断割点和块的准则,为设计用广度优先搜索寻找割点和块的有效算法提供了理论依据。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

Application of improved active disturbance rejection control algorithm in tilt quad rotor

The Tilt Quad Rotor (TQR) has complex dynamics characteristics, especially in conversion mode. It is difficult to build the dynamic model of the TQR and the environmental factors have a great influence on it. To solve the problem of control in conversion mode of TQR, this paper carries out the design of the controller based on improved Active Disturbance Rejection Control (ADRC). According to the characteristics of flight in conversion mode, Tracking Differentiator (TD) with explicit model is used to solve the problem of multiple integrals when the system is high-order system. Extended State Observer (ESO) with Radial Basis Function (RBF) neural network is used to estimate and compensate for internal and external uncertainties, and the adaptive sliding mode control in Nonlinear State Error Feedback (NLSEF) is used to improve the response speed of the controller and reduce the parameters which should be tuned. Through the flight control simulation of the TQR, the validity and rationality of the control system are verified.