梁结构线弹性碰撞的解析解

把结构弹性碰撞问题可以看成是碰撞结构集成系统振动初值问题,本文根据这一对策,得到了质点、杆分别与简支梁横向碰撞问题之解析解.借助数值分析方法详细探讨上述两种碰撞问题的动态响应特性,分析了冲击载荷的收敛性.用弹簧模拟接触变形,分析了接触变形对收敛性和碰撞响应的影响.     

两杆纵向非线性弹性碰撞的瞬间响应

把处于弹性碰撞接触状态下的两个杆件看作是一个振动体系,此弹性碰撞问题被转化成该碰撞体系在碰撞杆具有初始扰动速度下的振动响应问题,于是将此碰撞问题的分析纳入了常规的振动分析范畴.论文给出了该非线性弹性碰撞问题的描述方法,给出了一种考虑非线性Hertz弹性接触变形的线性化方法和详细的实现步骤,给出了该碰撞问题在不考虑接触变形和考虑线弹性接触变形两种情况的解析解,数值分析结果验证了上述分析方法的可行性和正确性.     

基于HLA的防空导弹武器系统仿真平台研究

介绍了一个以防空导弹武器系统为背景,基于高级体系结构(HLA, High Level Architecture)技术实现的包含虚拟现实技术的综合仿真平台.着重论述了该仿真平台的构成、开发过程及其关键技术,包括HLA、基于FEDEP(Federation Development and Execution Process)模式的开发过程,层次化软件结构、计算机生成兵力(CGF, Computer Generated Forces)技术、面向对象建模以及基于包围盒的碰撞检测等.     

基于小波包分解的早期碰摩故障诊断研究

研究了旋转机械转静件早期碰摩故障信号的检测问题.根据小波包分解能在所有频率范围聚焦,对信号奇异性非常敏感的特性,对比分析了不碰摩和早期碰摩信号的小波包分解细节分量,得出应用小波包分解可实现早期碰摩故障诊断.同时,还研究并实现了碰摩故障的定位问题.      

基于局部Neymark分解的混沌信号与噪声的分离方法

从动力系统和几何的观点出发,提出了基于局部Ｎｅｙｍａｒｋ分解的混沌信号与噪声的分离方法。该方法在一个局部的轨道空间内进行Ｎｅｙｍａｒｋ分解,重构时消除由噪声引起的在某些方向上的错误分量,接着进行反嵌入,使得这一由于噪声影响而发生畸变的局部轨道得以纠正,达到混沌信号与噪声分离（以下简称混沌滤波）的目的,并对其中的反嵌入问题作了较为深入的讨论,仿真实验表明了本方法的有效性。     

变压器突发短路故障的缺陷分析

变压器突发短路故障，给生产和人们生活造成了巨大损失。采用油色谱分析、绝缘电阻试验、绕组直阻试验和绕组变形试验的“四项分析”方法，对电力系统排除故障、安全运行有较大的实用价值。     

Prediction of horizontal gas–solid flows under different gravitational fields

In this paper the performance of horizontal pneumatic conveying under different gravity environments is evaluated. An Euler–Lagrange approach validated versus ground experiments is employed to predict the relevant particle variables such as particle mass flux, mean conveying and fluctuating velocities in terrestrial, lunar and micro-gravity conditions. Gravity reduced computations predict a reduction in the global particle–wall collision frequency. Also, in the case of low wall roughness and small particle mass loading, reduction of gravity acceleration implies an increase of particle–wall collision frequency with the upper wall of the channel affecting greatly the particle mass flux profile. In the case of high wall roughness and/or high particle-to-fluid mass loading (i.e., around 1.0) particle conveying characteristics are similar in the three gravity conditions evaluated. This is due to the fact that both, wall roughness and inter-particle collisions reduce gravitational settling. However, the influence of gravity on the additional pressure loss along the channel due to the conveying of the particles is much reduced.     

杆-梁和梁-梁组合结构中的波动现象

杆-梁结构和梁-梁结构都是典型的组合结构.用间接模态叠加法分析杆-Timoshenko梁之间以及两根Timoshenko梁之间的碰撞问题.在间接模态叠加法中,首先分别独立求得杆和梁的固有频率和模态函数,然后建立碰撞体和靶体之间的位移协调方程,并用逐步积分方法求解该方程.分析了纵波和剪切波在杆和梁中的传播特性.      

Continuum Model for Space Debris Evolution with Account of Collisions and Orbital Breakups

The paper discusses the mathematical modeling of long-term orbital debris evolution taking into account mutual collisions of space debris particles of different sizes. Investigations and long-term forecasts of orbital debris environment evolution in low Earth orbits are essential for future space mission hazard evaluation and for adopting rational space policies and mitigation measures. The paper introduces a new approach to space debris evolution mathematical modeling based on continuum mechanics incorporating partial differential equations. This is an alternative to the traditional approaches of celestial mechanics incorporating ordinary differential equations to model fragments evolution. The continuum approach to orbital debris evolution modeling has essential advantages for describing the evolution of a large number of particles, because it replaces the traditional tracking of space objects by modeling the evolution of their density of distribution.     

测量误差的基本问题

讨论了测量误差中两个基本概念:偶然误差与随机误差,介绍了两者的定义,说明了它们的区别,指明了将两者等同的错误。