高速低压差分信号（LVDS）器件应用设计方法研究

随着高速LVDS器件得到广泛应用，在高速信号使用LVDS传输时，信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量，因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此，文章深入探讨了高速电路的设计，总结出设计技巧。     

高速低压差分信号(LVDS)器件应用设计方法研究

随着高速LVDS器件得到广泛应用,在高速信号使用LVDS传输时,信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量,因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此,文章深入探讨了高速电路的设计,总结出设计技巧。     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.     

在片校准标准件基底边界条件影响

通过分析国内外校准标准件物理边界条件,研究不同校准基底的物理边界条件对共面波导（CPW）传输线特性和校准准确度的影响。研制了W波段砷化镓衬底的多线TRL在片校准标准件,将在片校准标准件分别放置在金属卡盘、玻璃片、吸波材料三种校准基底上。用三种不同校准基底的校准标准件对试验装置校准后,分别提取了CPW传输线的衰减常数、相对介电常数和特征阻抗,并对商用校准标准件104-783A的短路标准和传输线标准进行了测试,验证了结果的合理性。     

低温辐射计吸收腔研制

针对高灵敏度低温辐射计研制需求,提出一种低温辐射计吸收腔.设计椭球面光阑的多次反射结构,同时采用扩散焊工艺,进而实现了椭球面光阑、斜口—斜底圆柱腔和斜底面三部分的焊接成形,以此形成有效光陷阱,使入射到吸收腔中的辐射被近似完全吸收.制备具备多孔结构的碳纳米管涂层,采用喷涂为主的工艺实现腔体内壁涂层的均匀性分布.基于积分球...     

一类逆风ENO线方法的构造及其对Euler方程的应用

本文利用ENO(essentially-non-oscillatory)插值思想,对非线性双曲型守恒律=0提出了一类逆风ENO线方法,使用这种格式其计算量比C.Shu在文[6]中提出的通量分裂方法明显减少,进而同Runge-kutta时间离散相结合,提出了时空高精度差分格式。本文还把这类方法推广到方程组并用于计算Euler方程组的黎曼问题和拟一维喷管问题,得到了比较满意的数值结果。     

A statistical study of C IV regions in 20 Oe-stars

In this paper, using the Gauss-Rotation model (GR model), we analyse the UV C IV resonance lines in the spectra of 20 Oe-stars of different spectral subtypes, in order to detect the structure of C IV region. We study the presence and behavior of absorption clouds and analyse their characteristics. From this analysis we can calculate the values of a group of physical parameters, such as the apparent rotational and radial velocities, the random velocities of the thermal motions of the ions, the Full Width at Half Maximum (FWHM), the optical depth, as well as the absorbed energy and the column density of the independent regions of matter, which produce the main and the satellite clouds of the studied spectral lines. Finally, we present the relations between these physical parameters and the spectral subtypes of the studied stars and we give our results about the structure of the C IV region in their atmosphere.     

Semi-analytic Solution of Steady Temperature Fields During Thin Plate Welding

Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines （MOLs） is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary differential equations （ODEs） defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numerical example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.     

增压机身蒙皮划痕线对疲劳寿命的影响

在飞机维修中可能会因为施工不当,在增压机身蒙皮上留下一些划痕线,这个问题正在引起飞机制造商和维修公司的重视。根据蒙皮划痕线的性质和受力特点,采用ANSYS软件计算了划痕缺口的最大应力,并用局部应力应变法估算了循环载荷下构件的疲劳寿命,系统分析了不同程度的划痕线对机身增压蒙皮结构完整性的影响,并得到了一些有意义的结论。     

钢结构桁架相贯线焊缝超声检测方法研究

本文应用超声波探伤的基本原理和实际探伤经验对钢结构桁架相贯线焊缝的超声波检测进行了研究。运用缺陷反射回波的包络线法,分析了相贯线焊缝缺陷的性质,总结归纳了一些典型缺陷反射回波的规律,对其它类型焊缝缺陷的定性也有参考作用。