Broad-band spectral properties of accreting X-ray binary pulsars

Broad-band spectra of accreting X-ray binary pulsars can be fitted by a phenomenological model composed of a power law with a high energy rollover above 10 keV, plus a blackbody component with a temperature of few hundred eV. While, at least qualitatively, the hard tail can be explained in terms of (inverse) Compton scattering, the origin of the soft component cannot find a unique explanation. Recently, a qualitative picture able to explain the overall broad-band spectrum of luminous X-ray pulsars was carried out by taking into account the effect of bulk Comptonization in the accretion column. After a review of these recent theoretical developments, I will present a case study of how different modeling of the continuum affect broad features, in particular the cyclotron resonance features in Vela X-1.     

The Grain Impact Analyser and Dust Accumulator (GIADA) Experiment for the Rosetta Mission: Design, Performances and First Results

The Grain Impact Analyser and Dust Accumulator (GIADA) onboard the ROSETTA mission to comet 67P/Churyumov–Gerasimenko is devoted to study the cometary dust environment. Thanks to the rendezvous configuration of the mission, GIADA will be plunged in the dust environment of the coma and will be able to explore dust flux evolution and grain dynamic properties with position and time. This will represent a unique opportunity to perform measurements on key parameters that no ground-based observation or fly-by mission is able to obtain and that no tail or coma model elaborated so far has been able to properly simulate. The coma and nucleus properties shall be, then, clarified with consequent improvement of models describing inner and outer coma evolution, but also of models about nucleus emission during different phases of its evolution. GIADA shall be capable to measure mass/size of single particles larger than about 15 μm together with momentum in the range 6.5 × 10⁻¹⁰ ÷ 4.0 × 10⁻⁴ kg m s⁻¹ for velocities up to about 300 m s⁻¹. For micron/submicron particles the cumulative mass shall be detected with sensitivity 10⁻¹⁰ g. These performances are suitable to provide a statistically relevant set of data about dust physical and dynamic properties in the dust environment expected for the target comet 67P/Churyumov–Gerasimenko. Pre-flight measurements and post-launch checkouts demonstrate that GIADA is behaving as expected according to the design specifications. The International GIADA Consortium (I, E, UK, F, D, USA).     

Comparative study of productivity of the Rosetta target Comet 67P/Churyumov-Gerasimenko

In an attempt to evaluate correlations between several properties of comets we report the results of a cometary research involving a criterious analysis of gas and dust mass production rates in Comets 67P/Churyumov-Gerasimenko (main target of Rosetta Mission), 1P/Halley, Hyakutake (C/1996 B2), and 46P/Wirtanen and make a comparison between them.     

RPC-IES: The Ion and Electron Sensor of the Rosetta Plasma Consortium

The ion and electron sensor (IES) is part of the Rosetta Plasma Consortium (RPC). The IES consists of two electrostatic plasma analyzers, one each for ions and electrons, which share a common entrance aperture. Each analyzer covers an energy/charge range from 1 eV/e to 22 keV/e with a resolution of 4%. Electrostatic deflection is used at the entrance aperture to achieve a field of view of 90°× 360° (2.8π sr). Angular resolution is 5°× 22.5° for electrons and 5°× 45° for ions with the sector containing the solar wind being further segmented to 5°× 5°. The three-dimensional plasma distributions obtained by IES will be used to investigate the interaction of the solar wind with asteroids Steins and Lutetia and the coma and nucleus of comet 67P/Churyumov–Gerasimenko (CG). In addition, photoelectron spectra obtained at these bodies will help determine their composition.     

Simulation of cometary jets in interaction with the solar wind

The influence of cometary jets on the solar wind interaction is studied with a 3D hybrid simulation. Anisotropic outgassing patterns were until recently not considered in cometary simulations, despite strong anisotropies found at observations. Comet 67P Churyumov–Gerasimenko, the target of the ROSETTA mission, was chosen as a case study for a simulation series. The cometary outgassing at 2.7 AU is modeled to originate from a single sun-facing jet with different levels of collimation, from isotropy to extremely thin jets. As no bow shock is present at this distance, solar wind patterns resulting from the anisotropic outgassing become more apparent. We find narrower jets to increase the standoff distance of the plasma interaction structures. Also, the Mach cone is wider and stronger for certain jet profiles. The magnetic field remains unable to propagate through the coma, resulting in strong draping patterns for narrow jets due to the increased standoff distance.     

整体涡旋流对跨声速压气机Stage 67影响的定常数值仿真研究

为研究不同旋流强度的整体涡旋流畸变对跨声速压气机的影响,本文采用定常数值仿真的方法,基于一种整体涡旋流畸变发生器与Stage67跨声速压气机展开联合仿真研究。通过改变旋流畸变发生器叶片角度,可以模拟不同强度的整体涡旋流畸变流场,在不同旋流进气工况下得到了压气机的压比、效率特性曲线,并针对流场细节进行分析,研究其失速机理。结果表明：同向整体涡有效降低近失速点叶顶通道堵塞程度,使叶片流动损失减小,压气机稳定裕度扩大;反向整体涡加剧叶背气流流动分离程度,引起吸力面尾部低速区面积扩大,导致叶顶堵塞程度的显著加剧,通道流动损失增加明显,造成压气机稳定裕度下降。     

MIDAS – The Micro-Imaging Dust Analysis System for the Rosetta Mission

The International Rosetta Mission is set for a rendezvous with Comet 67 P/Churyumov-Gerasimenko in 2014. On its 10 year journey to the comet, the spacecraft will also perform a fly-by of the two asteroids Stein and Lutetia in 2008 and 2010, respectively. The mission goal is to study the origin of comets, the relationship between cometary and interstellar material and its implications with regard to the origin of the Solar System. Measurements will be performed that shed light into the development of cometary activity and the processes in the surface layer of the nucleus and the inner coma. The Micro-Imaging Dust Analysis System (MIDAS) instrument is an essential element of Rosetta’s scientific payload. It will provide 3D images and statistical parameters of pristine cometary particles in the nm-μm range from Comet 67P/Churyumov-Gerasimenko. According to cometary dust models and experience gained from the Giotto and Vega missions to 1P/Halley, there appears to be an abundance of particles in this size range, which also covers the building blocks of pristine interplanetary dust particles. The dust collector of MIDAS will point at the comet and collect particles drifting outwards from the nucleus surface. MIDAS is based on an Atomic Force Microscope (AFM), a type of scanning microprobe able to image small structures in 3D. AFM images provide morphological and statistical information on the dust population, including texture, shape, size and flux. Although the AFM uses proven laboratory technology, MIDAS is its first such application in space. This paper describes the scientific objectives and background, the technical implementation and the capabilities of MIDAS as they stand after the commissioning of the flight instrument, and the implications for cometary measurements.     

基于体积力模型的大S弯进气道与风扇耦合计算研究

为理解超紧凑大S弯进气道与风扇的耦合效应,基于体积力模拟方法开展了一体化计算研究。研究的进气道长径比为2.5,使用Rotor 67进行耦合分析,体积力模型与冻结转子计算得到的总压比、总温比和等熵效率分别相差4.49%,0.26%和2.38%。流场分析表明,风扇对入口段流场影响较为明显,主要体现为畸变区的顺向偏转与微弱衰减;进气道出口畸变经过风扇叶片后得到改善,大低压区和反向旋流基本消失;而流体在叶片的前后缘旋流角与轴向速度的综合改变量越大,风扇对气流做功越多。总的来说,超紧凑大S弯进气道与风扇之间耦合比较明显,需要在设计时进行详细的考察。     

Dust Environment Modelling of Comet 67P/Churyumov-Gerasimenko

Dust is an important constituent of cometary emission; its analysis is one of the major objectives of ESA’s Rosetta mission to comet 67P/Churyumov-Gerasimenko (C–G). Several instruments aboard Rosetta are dedicated to studying various aspects of dust in the cometary coma, all of which require a certain level of exposure to dust to achieve their goals. At the same time, impacts of dust particles can constitute a hazard to the spacecraft. To conciliate the demands of dust collection instruments and spacecraft safety, it is desirable to assess the dust environment in the coma even before the arrival of Rosetta. We describe the present status of modelling the dust coma of 67P/C–G and predict the speed and flux of dust in the coma, the dust fluence on a spacecraft along sample trajectories, and the radiation environment in the coma. The model will need to be refined when more details of the coma are revealed by observations. An overview of astronomical observations of 67P/C–G is given, because model parameters are derived from this data if possible. For quantities not yet measured for 67P/C–G, we use values obtained for other comets, e.g. concerning the optical and compositional properties of the dust grains. One of the most important and most controversial parameters is the dust mass distribution. We summarise the mass distribution functions derived from the in-situ measurements at comet 1P/Halley in 1986. For 67P/C–G, constraining the mass distribution is currently only possible by the analysis of astronomical images. We find that both the dust mass distribution and the time dependence of the dust production rate of 67P/C–G are those of a fairly typical comet.     

用于叶轮机械流场计算的交错网格有限体积法

在对各种交错网格离散格式的奇偶不耦合数值误差进行了详细的傅里叶分析和比较后,采用一种紧致的交错网格有限体积法将纳维-斯托克斯方程和k-ε湍流模型方程紧密的耦合在一起求解,发展了一套三维定常流程序.通过对NASA Rotor 67设计和非设计工况内部流场的数值模拟结果与实验的比较、分析,初步验证了程序的准确性和可靠性.