Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

POGO蓄压器变频降幅特性分析

论述纵向耦合振动（POGO）蓄压器的变频降幅特性，指出其主要影响因素是蓄压器容积及连接管路的液阻，根据输送管路的特定频率，选择适当的蓄压器容积，使其固有频率与特定管路的压力脉动频率相一致，可以获得预期的变频降幅效果。给出了蓄压器的变频降幅试验研究结果，可为POGO蓄压器的设计，研制，使得提供参考。     

模型的随机平衡降阶

本文提出了系统在白噪声激励下的一种开环降阶方法—随机平衡降阶法。在系统的随机平衡坐标中，输出性能指标可以表示成一组与系统随机可控／可观格莱姆相关的贡献值的和。根据这组贡献值的大小，可以决定在随机平衡坐标下降阶模型所要保留的状态分量，并从输出误差指标的最优角度出发，对输出矩阵作个修正。最后给出了一个数值仿真例子。     

THE RESEARCH OF INCREASING LIFT ANDREDUCING DRAG FOR WING-TIP SAILS

ＴＨＥＲＥＳＥＡＲＣＨＯＦＩＮＣＲＥＡＳＩＮＧＬＩＦＴＡＮＤＲＥＤＵＣＩＮＧＤＲＡＧＦＯＲＷＩＮＧ－ＴＩＰＳＡＩＬＳＣｈｅｎＭｉｎｇｙａｎ，ＱｉＭｅｎｇｂｕ（ＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，...     

基于改进准则法的复合壳阻尼结构拓扑减振动力学优化

针对复合壳阻尼结构的拓扑减振优化问题，以约束阻尼层的有限单元为设计变量，采用体积比、模态频率和振型为优化约束条件，构建以多模态权重系数的结构模态损耗因子数值关系为优化目标函数的拓扑减振优化模型。为了拓展优化目标灵敏度具有不局限于某一变密度法插值模型的形式，推导了数值表达式的一般函数式。动力学优化中优化目标灵敏度正、负数集共存，使得非凸性的目标函数设计变量出现负值或优化函数寻优于局部极值点。为此，推导出复合壳阻尼结构的全域灵敏度改进优化准则法迭代格，以确保每次迭代域均为全域设计变量集。结合有限单元法编程实现了复合壳阻尼结构改进准则法，并对复合壳结构进行拓扑减振优化分析。结果表明：在敷设体积减为全覆盖的50%时，复合壳结构的模态损耗因子增减偏差为10%，具有提升减振的轻量化设计目的；各阶目标函数和拓扑构型所需的迭代次数少，中间密度区域较小，多阶优于单阶模态优化函数，易于获得全域寻优的有效减振。     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

飞机蒙皮铆接过程中阻尼减振降噪方法探讨

针对铆接工作过程中振动和噪声过大影响工作人员身体健康以及装配质量等严峻问题,介绍了阻尼减振降噪技术,探讨了铆接过程中阻尼减振降噪的可行性技术,并简要的介绍了国内外在这一方面的研究成果。最后,认为利用建模仿真模拟来优化阻尼结构的设计和开发以及确定阻尼敷设的最优位置等。并总结出如何设计阻尼器以及设计一款合适的阻尼器所必需具备的几个特性。     

民机翼身整流影响分析与设计研究

针对某民机翼身组合体进行了翼身整流设计,以减弱机翼机身附面层之间的相互干扰,消除翼身结合处气流的分离,改善该民机的阻力性能。将翼身整流的多种设计方案(不同类型,不同安装位置,不同的几何尺寸等)配置到某民机翼身组合体模型上,用CFD方法对其流场进行粘性绕流数值模拟并对结果进行优化分析,得到了针对该民机减阻效果较好的翼身整流设计方案。     

暂冲式风洞大开角扩散段性能的实验研究

布置有多层孔板（丝网）的大开角扩散段通过参数的优化设计,可有效缩短暂冲式风洞启动时间,均匀进入稳定段的气流速度,并降低阀后噪声和气流脉动。针对某大型暂冲式风洞大开角扩散段设计关键技术开展专题研究,设计并进行了不同扩散段扩开角角度和中心体分流锥型式的组合实验,从压力损失、出口截面速度分布和降噪特性三个方面进行了对比分析。试验结果表明：试验件45°扩开角＋65°平底锥的压力损失相对最小,而增加导流尾锥的中心分流锥由于底部难以形成稳态的分离涡使得其压力损失明显偏大,其它试验件组合的压力损失值则相接近;各试验件出口截面的速压分布均呈现以中轴线对称分布的双驼峰趋势,且孔板的开孔率偏高时出口剖面速度分布相对更平滑;试验马赫数下的大开角段对气流噪声的消声量约为12～14dB,对频率在2kHz以上的气流噪声具有相对较强的消声能力,同时气流经过设置有多层孔板的大开角扩散段后,气流波动幅值明显降低,气流脉动得到有效地抑制。     

含有SMA弹簧驱动器的可变倾斜角翼梢小翼研究

 针对传统翼梢小翼在非设计状态减阻效果不佳的缺点,提出一种含有形状记忆合金(SMA)弹簧驱动器的变体翼梢小翼结构,它能根据飞行状态主动调整小翼的倾斜角,实时优化飞机的阻力特性.采用力-热-应变耦合法设计了所需的SMA弹簧驱动器,并通过有限元仿真与风洞试验验证了变体翼梢小翼的变形能力,最后初步研究了变体翼梢小翼的闭环控制方法.研究结果表明,在飞机的起飞阶段(自由来流流速为26 m/s,迎角为3°),变体翼梢小翼的倾斜角能在1 min内自主完成预定变化过程,倾斜角的最大变化量为23°,控制精度的最大误差为12%,各项指标均符合设计要求.