First estimations of the aerosol optical thickness using Langley Method at Southern Brazil (29.4°S, 53.8°W)

The first estimations of the aerosol optical thickness (AOT) using Langley Method at Southern Space Observatory (SSO) at Southern Brazil (29.4°S, 53.8°W) are presented. In addition to ozone and sulphur dioxide columns, AOT can be obtained using Brewer Spectrophotometer at specific wavelengths: 306.3, 310.1, 313.5, 316.8 and 320.1 nm. The AOT was obtained for the period from November/2002 to May/2003. Very low AOT averages were obtained, whose values were about 0.21 ± 0.03 at 306.3 nm, 0.21 ± 0.02 at 310.1 nm, 0.19 ± 0.02 at 313.5 nm, 0.20 ± 0.02 at 316.8 nm and 0.20 ± 0.02 at 320.0 nm for all period analysed. Different behaviour of AOT were obtained at two daily specific periods of aerosol accumulation, one in the afternoons from November/2002 to February/2003, caused mainly by a mild biomass burning season’s in the region and other in the mornings from March to May/2003, due the high relative humidity presented in the region studied.     

推进剂功能组分作用机理研究——(Ⅱ)丁羟/铝粉体系

在丁羟 /铝粉组成的实验体系中 ,通过测定药浆流变性的变化 ,研究了一些功能组分在推进剂中的作用机理。结果表明 ,醇胺络合物TEA·BF3 是推进剂中铝粉的偶联剂 ,在其它功能组分存在的条件下 ,仍能竞争吸附于铝粉颗粒表面。实验发现 ,在Al/HTPB/IPDI体系药浆中 ,TEA·BF3 与MAPO间存在明显的协同效应 ,使药浆流变性能显著恶化。文中对其它一些功能组分在药浆中的作用机理也进行了分析探讨。     

二硝酰胺铵(ADN)球形化工艺研究

介绍了近年来国外关于二硝酰胺铵（ADN）球形化的工艺方法，重点讨论了中间介质、分散剂、表面活性剂和热稳定剂的作用及其选择方法。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

混粉电火花加工表面的研究

分析了混粉电火花加工工件表面的组成成分,探讨了混粉电火花加工获得低的表面粗糙度的机理。     

P／MRene＇95合金缓冷处理与等温变形研究

本文对Ｐ／ＭＲｅｎｅ＇９５合金缓冷处理与等温变形进行了研究，探索采用缓冷处理降低合金等温变形时流变应力的可行性，煅造出φ２２０ｍｍ的涡轮盘试件。结果表明：缓冷处理改变了合金中γ＇相的尺寸和分布，对合金流变应力具有显著的影响，可促进等温变形时动态回复和动态再结晶的发生，细化晶粒。φ２２０ｍｍ涡轮盘的力学性能达到了技术规范的要求。     

粉末冶金γ-TiAl基合金研究的最新进展

γ TiAl基合金是一种具有发展前途的新一代高温结构材料。首先综述了γ TiAl基合金的性能特点和应用前景 ,并简单介绍了该合金的最新基础研究情况。随后介绍了采用粉末冶金方法制备γ TiAl基合金的基本工艺、力学性能 ,最后结合γ TiAl基合金排气阀和板材的研制论述了粉末冶金在γ TiAl基合金制备及近净成形方面的优势和发展前景     

燃烧室头部进气规律对煤粉燃烧效率的影响

用实验方法研究了火焰筒式煤粉燃烧室头部进气规律对燃烧效率的影响。通过对6种结构的头部配气方案的分析比较,得出了煤粉燃烧室合理的头部配气方案,为今后煤粉燃烧室的设计和工作状态的选择提供了重要的实验依据。     

大厚度比零件（外侧）和波纹管（内侧）的缝焊研究

某重点型号波纹管组合件的设计要求是缝焊，对照以往产品的结构，比较明显的情况是波纹管在零件的内侧。零件的厚度是3mm，波纹管的厚度是0.1mm，零件与波纹管的厚度比比较大。波纹管在零件的内侧会产生一个问题：波纹管在焊接过程中会逐渐收缩，到最后与零件之间产生间隙，导致局部形不成焊缝。研究通过减小车配间隙,增加冷却手段、滚轮厚度和压力等措施来实现大厚度比的零件和波纹管之间的缝焊。     

机器人喷涂在F-35的应用

介绍了机器人飞机精整系统（RAFS）的硬件设计，阐述了优化喷涂参数和机器人程序以实现涂层厚度控制的过程，给出了使用RAFS在生产型飞机上实施喷涂的结果。