进气道喘振诱发因素及其可靠性分析

针对飞机进气道的典型故障-喘振的诱发因素进行全方位的分析论证，并为从事航空工程的人员提供一种对动力装置整体性能进行可靠性评估方案，篇末对世界上比较先进的进气道气动设计思想及其喘振机理进行分析，可以为飞机设计师在设计飞机过程中具体分析问题提供一定的参考。     

污水处理装置在冶金行业中的应用

对污水处理装置的技术参数、技术要求及设计方案的选择、工作原理做了进一步的阐述。对工业循环冷却水的处理有实际指导意义。     

Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

量子力学中的Heisenberg测不准原理的数学推导以及在小波分析中的应用

从傅里叶变换的定义出发,利用时变信号的短时傅里叶变换,推导出量子力学中的Heisenberg测不准原理,说明了两者之间存在这种联系的必然性,并给出了测不准原理在小波分析中的应用举例。     

MIS系统中复杂关系模式的设计及其PFC实现

软件开发已经从面向过程方式的编程逐步转化为面向对象方式,但关系模式的确定仍是MIS系统开发所面临的最关键的、具有普遍意义的问题之一。结合国航天津分公司航修基地管理信息系统开发过程中遇到的复杂模式设计问题,本文给出了在规范化理论指导下同类问题的分析方法,并且给出了PB环境下的PFC实现。     

五边平行进近冲突风险定量分析模型

针对飞机五边平行进近时飞行冲突,提出了一种五边平行进近飞行冲突定量分析模型。模型通过飞机在任意时刻的标称位置坐标与因不确定性因素导致的航迹偏移量之和,形成飞机任意时刻真实位置坐标,基于此推导出飞机在五边平行进近时冲突风险计算公式。在分析不确定性因素导致航迹偏离时,提出了一种基于布朗运动的随机过程来描述因干扰因素导致飞机随机运动的方法。在建立模型后,使用蒙特卡罗仿真方法计算了飞行冲突概率,结果理想。     

直流发电机并联供电平衡性探讨

主要介绍了某型飞机直流发电机并联供电的原理、供电时负载变化对平衡性的影响以及不平衡产生的原因,分析了影响并联供电的一般规律,并结合实际提出了预防不平衡供电的具体措施和建议。。     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

船舶燃机电机混合动力控制方法

在对现有混合动力控制系统进行研究的基础上,提出了新型的燃气轮机和异步电机混合动力系统。采用模块化的设计方法,建立了燃气轮机、异步电机、S.S.S.离合器、并车齿轮箱、并车控制器和螺旋桨等部件的数学模型,进而构建了整个系统的仿真模型。利用外特性法建立了燃气轮机的仿真模型;采用电流滞环跟踪 PWM方法建立了异步电机仿真模型,实现了弱磁调速;建立了 S.S.S.离合器的可靠的仿真模型,能够研究并车时的冲击;设计了 2种推进方式投切策略,实现了混合动力仿真;设计了并车控制器以实现并车过程调节。对混合动力控制策略和并车过程进行了仿真,结果表明所提出的混合动力系统能够正常工作,并车控制器工作较好,并车策略有效,能够减小并车过程中的冲击。     

New constitutive relation for eddy viscosity models

A new turbulent constitutive relation was directly derived from Boussinesq's hypothesis and mixing length theory, and then implemented in the standard k-ε model. The performance of this constitutive relation was validated in zero pressure gradient flat-plate boundary layer flow, fully-developed turbulent channel flow and separated flow in a plane asymmetric diffuser. The investigation demonstrated that, this new constitutive relation gave very accurate results in the former two basic cases and provided significant improvement in prediction of separated and reattachment points in the plane asymmetric diffuser. Separation and reattachment points at x/H=7.5 and 29 were calculated accurately in comparison to experimental results, and the static pressure coefficient of 0.82 was very close to large eddy simulation calculation. These results are very encouraging but further verification and extensive application of the new constitutive relation to other two-equation eddy viscosity model are needed.