Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress

Marciniack–Kuczinski (M–K) model is widely used to predict material’s forming limit curve (FLC). The prediction of FLC traditionally neglected through-thickness normal stress. However, it cannot be neglected in some forming processes. Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress. In addition, based on Nakazima test process, the ratio of through-thickness normal stress and maximum principal stress has been derived, which was a function of instantaneous thickness and loading path. Here, initial groove angle in M–K model was not considered. In this paper, uniaxial tension tests and Nakazima tests were performed on 7B04 aluminum alloy. Based on Hill 48 yield criterion and M–K model, the prediction model of FLC was established. The increase of thickness can enhance FLC. Meanwhile, it is necessary to consider through-thickness normal stress and initial groove angle in prediction model. On the left side of FLC, the effect of initial groove angle on FLC is weakened by increasing sheet thickness. On the right side of FLC, the effect of initial groove angle on FLC is strengthened by increasing sheet thickness. On the right side of FLC, the relation between limit strain points with different thicknesses is linear under one certain loading path. Thickness has decisive effect on through-thickness normal stress level and the changing trendy of through-thickness normal stress during calculation is different under different stress condition.     

新建他激反激变换器方程及其解析解

引用文 [1 ]的思路 ,寻找他激反激变换器的运行状态特征参量 (磁通密度增量、剩余磁通密度和占空比 )与构成这一变换器的基本物理参量之间的函数关系。首先阐明由于频率给定 ,他激反激变换器稳态运行时会出现无剩磁工况和有剩磁工况两种。而后确定这两种工况下 ,磁路等效储能空间单位体积每个周期的传输能量 (命名为“磁能传输密度”)。在这基础上 ,分别建立和解出他激反激变换器在不同工况下稳定运行时应满足的方程。最后根据所得的解析解阐明这种变换器的特性。本文和文 [1 ],以磁路分析为基础建立了一种新的反激变换器理论。     

一个简单有效的磁记录纠错系统

介绍一种简单有效的纠错编码方法 ,用于资源卫星高密度数字磁记录器 ,使误码率由 10 -6降低到 10 -11,同时介绍它的基本工作原理、实现方案及试验结果。     

发射特性对线性各向异性散射介质内瞬态温度分布的影响

考虑各向异性散射介质内的辐射传递方向，本文考察了辐射能的重新分配过程。利用射线踪迹法结合Hottel和Sarofim区域法推导了辐射传递系数(RTCs)。考虑一维各向异性参与性半透明灰介质。两边界表面为镜反射，一个表面半透明，另一个表面不透明。辐射传递系数用于计算辐射热源项。瞬态能量方程由全隐式控制容积法求解。外界辐射加热与对流冷却同时作用于边界表面。考虑四个线性散射相函数。以各向同性散射情况比较，研究不透明边界两侧发射特性和线性散射相函数对瞬态温度分布的影响。结果表明，各向异性散射与各向同性散射介质间的相对温度差异与散射不对称参数近似成正比。     

Prompt effects of solar wind variations on the inner magnetosphere and midlatitude ionosphere

It is well known that the solar wind can significantly affect high-latitude ionospheric dynamics. However, the effects of the solar wind on the middle- and low-latitude ionosphere are much less studied. In this paper, we report observations that large perturbations in the middle- and low-latitude ionosphere are well correlated with solar wind variations. In one event, a significant (20–30%) decrease of the midlatitude ionospheric electron density over a large latitudinal range was related to a sudden drop in the solar wind pressure and a northward turning of the interplanetary magnetic field, and the density decrease became larger at lower latitudes. In another event, periodic perturbations in the dayside equatorial ionospheric E × B drift and electrojet were closely associated with variations in the interplanetary electric field. Since the solar wind is always changing with time, it can be a very important and common source of ionospheric perturbations at middle- and low-latitudes. The relationship between solar wind variations and significant ionospheric perturbations has important applications in space weather.     

低密度小喷管流场的DSMC直接模拟

用ＤＳＭＣ方法数值模拟了低密度轴对小喷管的流场流动，获得了相应的结果，并将所得结果与用差分求解Ｎ－Ｓ方程方法获得的结果进行了对比，二者吻合较好。     

一种用于材料高温蠕变分析的统一粘塑性损伤本构模型

通过应变等效假设在本文提出的具有过应力特征的统一粘塑性本构模型［５］中引入了描述材料损伤的内变量。并且给出了一个基于组合功密度概念的新的损伤模型。同以往的唯象模型相比，该损伤模型具有较明确的细观物理意义，能反映应变率和应力状态对损伤演化发展的影响。     

液体密度传感器

介绍了几种典型的液体密度传感器的基本结构、工作原理与应用特点.     

浅议最佳测量能力及其评定

介绍了最佳测量能力的有关定义,对电子式电能表在常规校准时的扩展不确定度评定过程和最佳测量能力的评定过程进行了比较.