轴对称降落伞稳定下降阶段的流场特性

文章根据降落伞的特点,通过3点假设(伞衣的薄膜假设、降落伞的轴对称假设和流场的定常 假设),将三维复杂流动问题,转化成二维轴对称问题,以节约计算时间。然后,建立轴对称降落伞的流体力 学计算模型,利用数值模拟手段,求解RNG(Renormalization Group)k-epsilon湍流模型下的N—S方程组,获 得与有关单位试验相吻合的计算结果。分析发现带顶孔的轴对称降落伞绕流和亚临界状态下带中心孔的 圆球绕流,在尾流区拓扑结构上几乎完全一致。结果表明建立的轴对称降落伞模型,能够揭示降落伞流场 的本质特性,为进一步研究降落伞流场的流动机理和流固耦合问题打下基础。     

Ti-Cr合金高温氧化行为的研究

研究了Ti-11Cr,Ti-13Cr和Ti-15Cr合金600℃及800℃高温氧化行为.研究结果表明,相同温度下,Cr含量越高,氧化增重越小.相同合金,温度愈高,氧化增重愈大.随着温度升高,Cr含量对氧化速度的影响显著增大.随着Cr含量升高,氧化膜的晶粒尺寸减小,粘附性和抗开裂剥落性增加.并讨论了Cr含量对Ti-Cr合金高温氧化行为的影响机理.     

一种关于目标与安全管道相对位置估算方法

针对靶场试验安全控制中目标与安全管道位置估算的实际需求,结合靶场实时数据处理要求,提出了利用滑动窗口技术,动态载人理论弹道数据,并采用折半查找和KNN查询相结合的思想实现了目标与理论弹道最近邻点查询,完成了飞行目标与理论规划航迹间的位置等参数偏差查询。利用区间估计原理,给出了目标与安全管道相对位置估算方法,解决了传统试验中无法对目标与管道边界的接近程度进行量化的问题。     

数据缺失场合下k/N(G)系统可靠性指标的经验Bayes估计

在定数截尾缺失数据样本下,研究了不可修k/N(G)系统的可靠性指标的估计问题。将极大似然估计法和Bayes方法相结合得到了部件的平均寿命、系统可靠度及平均寿命等可靠性指标的经验Bayes估计,最后利用随机模拟例子说明了本文方法的正确性和可行性。     

Beam-Park-Experiment-1/2000 with TIRA

A monostatic 24-h debris observation campaign (BPE-1/2000) has been prepared and conducted using FGAN's TIRA L-Band system. Based on experiences from previous Beam-park experiments a similar largely automated data processing is applied on an extended range window of 300–2000km. More than 1500 detections are encountered, 471 of them are verified as being real objects in Low-Earth-Orbit (LEO). PROOF's observation forecasting of catalogued objects is evaluated against the observed objects, and the difficulties obtaining radar cross-sections (RCSs) and object sizes from Beam-park experiments are discussed. Sidelobe detections are identified by using background information like two-line element (TLE) sets and/or catalogued RCSs.In comparison with previous experiments, the statistics show similarities confirming the concept of Beam-park experiments for space debris observations, despite the snapshot character of 24-h experiments. The comparison with MASTER/PROOF'99 and ORDEM2000 leads to a reasonable agreement between models and observations.     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

计算有转换判定n∶k交叉贮备系统可靠度的仿真算法

给出有转换判定的ｎ∶ｋ 交叉（ｃｒｏｓｓ ｓｔｒａｐｐｉｎｇ）贮备系统可靠性仿真的通用算法。该算法能计算具有任意部件数和任意部件寿命分布类型的有转换判定的 ｎ∶ｋ 交叉贮备系统可靠度。通过完整的误差分析对该算法的结果进行解释。     

k/N(G)系统可靠性评定的熵(法)近似限

将近代,Shannon信息论与可靠性工程理论相结合,推导了由不同成败型或不同指数型单元组成的k/N（G）系统可靠性评定用的熵（法）第一、二近似下限计算公式。评定结果令人满意。     

Variable Structure Control of Catastrophic Course in Airdropping Heavy Cargo

The mathematical model of a transport aircraft would be subjected to a sudden change when heavy cargo is dropped off in airdropping, which exerts serious influences upon the safety of the aircraft. A variable structure controller is specially designed for handling the airdrop process. The nonlinear system is linearized by input-output feedback linearization using differential geometry theories. On this basis, an inner loop system for velocity and attitude tracking control is designed by using the exponentially approaching rule of the variable structure theory. The whole flight control system is integrated with the outer loop flight altitude control. Digital simulation evidences the applicability of the system to potentially catastrophic course in airdropping heavy cargo and provides robustness against system parameter perturbation.