飞机燃油油量测量及姿态误差修正方法

提出了一种基于 CAD技术的航空燃油油量实时测量方法。采用三维实体造型技术 ,建立了某飞机机翼油箱模型 ,利用油量传感器的输出值及飞机姿态信息 ,对燃油油量进行实时测量及姿态误差修正。     

最小二乘直线函数的特性分析

证明了最小二乘直线函数是一种严格的凸函数。F(a,b)=∑(y-ax_i-b)~2是一个椭圆抛物面。a=[n∑x_iy_i-∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]和b=[∑x_i^2∑y_i-∑x_i∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]仅表示极值点。a=∑x_iy_i/∑x_i和 b=[∑x_i^2∑y_i-∑x_i∑x_iy_i]/[n∑x_i^2]在某些情况下可以是极值点,但不是在每种情况下都是极值点。     

多点法测量形状误差的补偿控制系统

经过对误差分离技术理论进行了分析之后,又对误差补偿技术进行了研究,并建立了多点法测量形状误差的补偿控制系统。通过补偿主轴径向误差运动,提高了工件的圆度误差和圆柱度误差。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制     

关于平面空穴流动的截断误差减小方法(英文)

提出了一种新的截断误差减小方法。该方法是利用在粗网格 ( 2 h)上估算截断误差进而减小在原始网格( h)上的误差的迭代过程 ,最终目的是利用粗网格得出更精确的结果以及发展一种新的粗网格直接数值模拟方法     

再入制导和弹道跟踪误差分析

新一代可重复使用运载器对再入制导提出了更高地要求。目前的空间运输系统证明基于阻力加速度的制导方法是行之有效的。其基本概念是跟踪基准阻力加速度包线，在飞行过程中可根据需要更新这个包线。跟踪适当的阻力加速度包线保证了飞行器可以飞行准确的距离达到目标，同时满足弹道约束。在横向上，我们可采用类似于美国航天飞机的倾斜反转逻辑或航向角跟踪技术。本文推导出了基于反馈线性化的控制算法，并将其应用于可重复使用运载器纵向和横向的制导。最后，我们分析了阻力加速度跟踪的误差。     

介质粘性对椭圆齿轮流量计性能影响的研究

本文根据粘性流体力学原理和转子动力学理论,分析了椭圆齿轮流量计的缝隙漏流和转子受力状况,建立了能预测介质粘性对流量计误差特性和压力损失影响的理论模型。数值计算表明,理论值与实验数据基本吻合。     

偏振光干涉计量中的椭圆偏振化误差分析

主要分析两束相互垂直的线偏振光经过金属反射镜反射后引起的椭圆偏振化的不对称性，并研究由此产生的非线性误差的变化规律，这对提高偏振光外差干涉仪的测量精度是极为重要的。     

高精密角度分度测量控制系统的研究

研制并开发了用于角度标定的高精密角度分度装置及其测量控制系统,装置采用永磁直流力矩电机驱动精密轴系主轴的运转来带动分度盘的转动,以圆光栅测量系统检测主轴的转动角度,为了实现角度的零误差分度定位控制,转动角度的分度控制采用了闭环自动控制系统。研究分析了圆光栅测量信号处理中信号细分形成的系统非线性误差对装置分度精度的影响,建立了误差修正模型,通过误差补偿,系统在±5°的角度测量范围内分度控制精度达到±0.2″。