Conditional sea surface statistics and their impact on geophysical sea surface parameters retrieved from SAR altimetry signals

In this study we present an analytical formulation of synthetic-aperture radar (SAR) altimetry signals including narrow banded nonlinear wave fields and conditional statistics between wave elevation displacements, horizontal wave slopes and vertical wave particle velocities. Considering the wave elevation displacements coskewness with respect to horizontal slopes leads to an analytical formulation of the electromagnetic bias within a SAR-mode altimeter stack. This formulation can be either parametrized by the significant wave height (SWH) and mean wave steepness, or in terms of the variance of vertical wave velocities. The effect of conditional vertical wave particle velocity variances with respect to the observed horizontal wave slopes close to nadir incidence angles leads to an effective reduction of the azimuth blurring of SAR-mode stacks. We present here a formulation of this effect by examining JONSWAP ocean wave spectra. In most cases this effect reduces the azimuth blurring by 10% to 30%. Additionally we investigate the effect of a nonlinear wave elevation displacement probability density function (PDF) on estimated geophysical parameters. We were able to show that including an elevation displacement skewness of 0.13 improves significantly the SWH consistency between altimetry and ECMWF Reanalysis v5 ERA5 results.All of these effects are validated with respect to ERA5 model data in the North East Atlantic region and in situ data located in the German Bight and Baltic Sea.The developed model can be used in both SAR and conventional altimetry retrackers.     

双模块下颌式内转进气道/圆锥前体一体化布局研究

为实现三维内转进气道的内收缩流场与圆锥前体的外压缩流场的良好匹配，提出了一种双模块下颌式内转进气道/圆锥前体(Double-modules Chin Inward-turning Inlet and Conical Forebody，DCII/CF)一体化设计方法，获得一种新颖的双发并置、侧向安装的DCII/CF一体化布局。针对该布局形式，开展了DCII/CF一体化构型与传统的单模块内转进气道/圆锥前体(Single-module Inward-turning Inlet and Conical Forebody，SII/CF)一体化构型的数值对比研究。结果表明：DCII/CF一体化布局不仅为内转进气道提供了优秀的前体附面层排移效果，还有效避免了传统SII/CF布局中前体附面层与进气道内部流场之间的相互干扰。在Ma∞=6.0设计状态，DCII/CF一体化布局的进气道总压恢复系数相较传统的SII/CF布局有了显著提高，从0.403提高至0.482；但由于前体附面层的排移，该布局的捕获流量略有降低， SII/CF的流量系数为0.956，该布局则为0.917。而在非设计状态，该布局形式同样具备较好的总压恢复性能，在Ma∞=5.0与Ma∞=4.0的总压恢复系数分别达到了0.586和0.682，明显高于SII/CF的总压恢复系数0.507和0.619。     

进气道喘振诱发因素及其可靠性分析

针对飞机进气道的典型故障-喘振的诱发因素进行全方位的分析论证，并为从事航空工程的人员提供一种对动力装置整体性能进行可靠性评估方案，篇末对世界上比较先进的进气道气动设计思想及其喘振机理进行分析，可以为飞机设计师在设计飞机过程中具体分析问题提供一定的参考。     

Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

等质量异形粒子超高速撞击侵蚀

用数值方法模拟双锥，圆柱，椭球、圆锥和倒圆锥五类等质量异形铝粒子五种高宽比共２５种粒子对半无限铝靶的超高速撞击侵蚀，撞击速度为４ｋｍ／ｓ，给出了坑深、坑径、坑形参数和坑体积随粒子形状及高宽比的变化曲线。结果与非圆球异形粒子超高速撞击侵蚀计算有重要参考价值。     

空间能量粒子探测方法研究

阐述了空间能量粒子探测的原理和方法。介绍了国外在能量粒子探测方面所采用的半导体望远镜测量法、电场加速法、磁偏转法等方法，分析了它们各自的优缺点。就制约能量粒子探测技术发展的关键因素进行了讨论。并以此为基础，结合我国实际情况提出了一种新的探测方法。     

煤粉粒径分布在气固两相流场中的测试技术研究

针对输送管道内煤粉颗粒的粒径分布宽的特点，用侧向接收散射光的Mie散射方法和Fraunhofer衍射方法作了理论分析和实际测试。利用分子筛和显微镜对被测粒子进行了静态测量，其结果可以作为相对准确的测量标准。研究结果表明，针对细粉分离器内煤粉颗粒的形状、浓度和粒径的分布规律，用衍射测试方法可以达到较高的测试精度，取得较好的测试效果。     

磁粉检验标准环形试块的机理分析

为了分析控制磁粉检验系统综合性能的标准环形试块的机理，首先建立一个计算漏磁场的简化数学模型，然后解标量磁位的=维拉普拉斯方程，求出被磁化的环形试块上圆孔产生的漏磁场，计算环形试块表面的磁粉受力，分析其特点并得出相应的结论。     

圆波导圆柱轴＋平面叶片终端不连续性的计算

分析了圆波导中“圆柱轴＋平面扇形金属叶片终端”的不连续性，根据电磁场互易定理和物理光学法（ＰＯ）计算了这种终端对波导模的反射系数。这个问题的研究可用来解决喷气式发动机进气道对电磁波的反射，进一步地利用本文的结果可计算进气道的雷达截面（ＲＣＳ）或极化散射矩阵。     

超燃冲压发动机研究综述

超燃冲压发动机技术是一项新型的、具有广阔发展前景的推进技术。本文对国内外超燃冲压发动机最新研制情况进行了综述，重点论述了该类发动机关键技术研究情况，并对关键技术研究及思路提出了几点建议。