Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

精密机械零件的统计尺寸公差

精密机械产品的发展要求具有高性能、高可靠性和高质量。如果用设计时减小公关的方法来保证精度，则将难以解决加工和装配中产生的问题。因此需要在采用尽可能大的公差值的民政部下满足精度一文将讨论一些实例，寻找借助于统计尺寸公差降低加工精度要求的办法。     

量子力学中的Heisenberg测不准原理的数学推导以及在小波分析中的应用

从傅里叶变换的定义出发,利用时变信号的短时傅里叶变换,推导出量子力学中的Heisenberg测不准原理,说明了两者之间存在这种联系的必然性,并给出了测不准原理在小波分析中的应用举例。     

MIS系统中复杂关系模式的设计及其PFC实现

软件开发已经从面向过程方式的编程逐步转化为面向对象方式,但关系模式的确定仍是MIS系统开发所面临的最关键的、具有普遍意义的问题之一。结合国航天津分公司航修基地管理信息系统开发过程中遇到的复杂模式设计问题,本文给出了在规范化理论指导下同类问题的分析方法,并且给出了PB环境下的PFC实现。     

无损检测的内涵演变及其在质量控制中的作用

就无损检测的内涵如何从探伤演变到评价及无损检测在质量控制中的应有作用作了叙述,希望对相关人员开拓思路、提高工作质量有所裨益.     

基于响应面法的齿轮容差设计方法研究

随着附件传动系统不断向高速、重载方向发展,齿面接触可靠性问题越来越受关注.为提高齿轮可靠性,分析了齿轮传动系统常见误差类型及影响,开展了齿轮容差设计初步探讨.根据齿轮制造、加工及系统动态误差的产生原理和作用方式,基于齿轮接触应力仿真结果,确定了影响齿轮接触应力随机性的5种主要误差形式及其特征量分布规律,提出了基于响应面法的齿轮容差设计方法,给出了齿轮系统公差设计的改进方向:在进行齿轮公差设计时,重点控制H、V方向的轴向平行度公差.     

New constitutive relation for eddy viscosity models

A new turbulent constitutive relation was directly derived from Boussinesq's hypothesis and mixing length theory, and then implemented in the standard k-ε model. The performance of this constitutive relation was validated in zero pressure gradient flat-plate boundary layer flow, fully-developed turbulent channel flow and separated flow in a plane asymmetric diffuser. The investigation demonstrated that, this new constitutive relation gave very accurate results in the former two basic cases and provided significant improvement in prediction of separated and reattachment points in the plane asymmetric diffuser. Separation and reattachment points at x/H=7.5 and 29 were calculated accurately in comparison to experimental results, and the static pressure coefficient of 0.82 was very close to large eddy simulation calculation. These results are very encouraging but further verification and extensive application of the new constitutive relation to other two-equation eddy viscosity model are needed.      

基于断口分析的钛合金轮内部缺陷损伤容限

为进行某轮损伤容限设计,开展了裂纹扩展断口分析和仿真分析研究。由断口分析可知:疲劳源为一处内部自然缺陷;依据疲劳辉纹确定了裂纹扩展速率;在裂纹长度为2 mm附近,裂纹扩展速率明显增大,为第一、第二加载阶段转换区域;裂纹稳定扩展区裂纹长度与裂纹扩展速率呈双对数线性关系;应用列表梯度法和Paris公式法反推了第二加载阶段的疲劳寿命,与该阶段实际循环次数的最大误差是163%。裂纹稳定扩展阶段裂纹扩展仿真值与断口反推值吻合;非稳定扩展阶段仿真值与断口反推值的最大误差为-215%;基于以上研究,合理确定了某离心轮内部裂纹表面扩展停机检测周期。该类轮非稳定、失稳扩展阶段寿命占内部裂纹表面扩展阶段寿命的比例达248%~357%,因此准确计算具有重要意义。     

螺旋锥齿轮安装误差敏感性与容差性研究

研究含刀倾法和变性法加工的螺旋锥齿轮齿面通用模型建立方法, 提出安装误差敏感性和容差性概念, 建立安装误差敏感性和容差性分析模型, 以包含安装误差的齿面接触分析方法为工具, 根据实际的齿轮副参数, 获得安装误差对接触质量的影响规律和保证接触质量的误差极限值.分析与实例计算表明:安装误差敏感性和容差性模型建立了安装误差与螺旋锥齿轮齿轮接触质量和安装工艺参数之间的联系, 为提高螺旋锥齿轮齿轮制造质量和制定科学的安装工艺参数提供了理论指导.      

钛合金结构损伤容限设计可行性研究

对飞机结构常用金属材料损伤容限特性进行了对比分析,针对TC4和TA15损伤容限特性较差的缺点,研制出两种超低间隙（ELI）钛合金TC4ELI和TA15ELI,并对其进行结构损伤容限设计可行性论证。进行了两种超低间隙钛合金和普通钛合金裂纹扩展寿命、剩余强度和疲劳全寿命对比实验。实验结果表明：具有片层组织的超低间隙钛合金相对于普通成分钛合金断裂韧性和裂纹扩展特性有明显改善,剩余强度和疲劳全寿命相当;应力水平相当时,超低间隙钛合金工程可检裂纹扩展寿命比航空结构中常用铝合金稍长。因此,对于超低间隙钛合金TC4ELI和TA15ELI可以进行损伤容限设计。