同轴探针对称激励矩形波导模式谱图研究

通过理论分析证明，同轴探针对称激励矩形波导时，其模式谱图中不存在引起合成场结构不对称的高次模TE20及TE01模。应用分式线性变换检测法进行了对比测试，验证了理论分析结果的正确性。对聚四氟乙烯样品，在7—16GHz频带内测量其复介电常数均有较高的测量精度。实验表明，在一定条件下，标准三公分波导工作频率可高达16GHz，如果取波导宽窄边比r=3，工作频率可达19GHz。所得结果对于微波材料宽带测量具有实用价值。     

Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

金属载体上线天线阻抗与辐射特性的矩量法研究

用线网格模拟金属载体表面，应用矩量法求出天线及载体网格上的电流分布，据此研究在该金属载体影响下的天线特性，在计算阻抗矩阵元素时，利用了非对称正弦偶极子辐射场的精确表达式，并采用了直接复数积分，简化了计算公式，本文给出了几种金属载体上线天线的阻抗与辐射特性的计算结果，它们与有关文献上的数据或实验结果一致，最后计算了一种舰船简单模型上两根线天线的远区辐射场及它们的自阻抗与互阻抗。     

高频宽范围阻抗测量的一种新方法

本文根据微波网络理论,提出了利用A参量求解高频阻抗的新方法,详细介绍了如何将该方法用于网络分析仪系统测量高频阻抗,并将其测试结果与美国惠普公司生产的专用高频阻抗分析仪HP4191A及该公司最新展出的频谱、网络、阻抗分析仪HP4195A的测试结果作了比较,实践证明,该方法与传统的S参量法相比,大大拓宽了阻抗测量范围,提高了测量精度(能自动地消除联接电缆的影响),且适用于被测件的同轴联接及非同轴联接。此方法对利用各种网络分析仪实现高阻测量具有普遍意义。     

飞机液压能源管路系统的振动特性分析

论述了液压能源管路网络系统的建模，着重建立了液体输管路及有关元件的传递矩阵，并给出了如何用特性阻抗法对系统进行求解，最后对飞机液压能源管路系统的动态特性进行了仿真，并指出了一些重要的影响因素。     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

头盔伺服系统的主动柔顺控制

 对头盔伺服系统(HMDPM)主动柔顺控制策略的主要内容——轨迹规划和控制方法进行了研究。首先,采用基于力反馈和滑动杆动力学模型的头部运动预测法进行轨迹规划,该方法利用并联机构(PM)分支杆长与运动平台位姿间的映射关系,通过力反馈信息和6-3UPS并联机构滑动杆动力学模型对头部运动进行预测,为头盔伺服系统的位置控制提供期望轨迹;然后,基于头盔伺服系统的动力学模型对系统的惯性项和非线性项进行了计算,设计了惯性项和非线性项补偿控制器,在进行头部运动跟踪的同时,实现了头盔显示器与头部间接触力的控制;最后,采用SimMechanics模块建立了HMDPM—人交互模型,并进行了相关验证实验。仿真结果表明,基于力反馈和滑动副滑动杆动力学模型的头部运动预测法能实时地、较为准确地预测出头部运动位置;基于动力学模型的惯性和非线性项补偿控制器不仅可以较为准确地跟踪头部运动,而且还能有效地减小头盔显示器与头部间的接触力,降低执行机构的刚度、减少系统摩擦力等非线性因素对使用者的干扰。     

交流阻抗谱法评价热障涂层的热腐蚀行为(英文)

本文利用交流阻抗这种无损检测的方法研究了热障涂层在质量分数为25%NaCl+75%Na2SO4混合盐体系中的热腐蚀行为。实验结果显示,热腐蚀条件下,在陶瓷层和粘结层界面处形成TGO层为混合氧化物层,成分为Cr2O3、(Ni,Co)(Cr,Al)2O4和NiO,其厚度增长符合抛物线规律。热障涂层在110个循环腐蚀之前时,TGO层的电阻值随其厚度的增加而增加;110个循环后,虽然TGO层的厚度还是在增加,但由于TGO层孔隙的增多而导致其电阻值有所下降。陶瓷层的电阻值随着陶瓷层中裂纹的萌生和扩展而不断增大。等效电路中得到的参数可以用来表征热障涂层的失效行为。     

高摩擦性能碳／碳复合材料的微观结构

使用激光拉曼探针和电子显微术对试样的断裂面和薄膜样品观察及电子衍射技术研究了两种抗摩擦性能相差悬殊的碳／碳复合材料的微观结构，发现两种材料的微观结构在石墨晶体的结晶结构完整性和取得性以及纤维和基体间的界面行为上有显著差异。     

Broadening of Fe X (6374 Å) profiles above the limb in a coronal hole

Profiles of the visible Fe X (6374 Å) coronal emission line as a function of height above the limb were obtained out to 1.16 solar radii in a coronal hole using the NSO/Sacramento Peak Observatory Coronagraph, Universal Spectrograph and a CCD camera. These are the first coronal line profiles obtained as a function of height in a coronal hole from the ground. Analysis of the line widths suggests a large component of nonthermal broadening which increases with height ranging from 40 to 60 km/s, depending upon the assumed temperature or thermal component of the profile.