FET振荡器注入锁相伏特拉级数分析

应用伏特拉级数法分析了电容耦合ＦＥＴ振荡系统在外加信号下的注入锁定现象，推导出输出信号和注入锁定带宽表达式。与一般非线性系统分析方法相比，伏特拉级数法在建立好系统模型后只需进行代数运算，从而避开了求解非线性，非齐次高阶微分方程的复杂过程。     

一种新型的微机补偿晶体振荡器及开发系统

提出了一种新型的以微处理器为核心的AT切温度补偿晶体振荡器 (MCXO)的设计思想 ,说明了其开发系统的原理 ,给出了最后的实验结果。使用该开发系统得到的这种振荡器可以工作在 - 40℃～ 85℃的环境内 ,频率—温度稳定性≤± 5× 10 - 7。     

压控振荡器品质因数与其相位噪声的关系

讨论了压控振荡器的相位噪声与其品质因数的关系,某实际压控振荡器的相噪测试结果验证了经理论推导的相位噪声谱的正确性。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

简谐激励下弯曲薄板的非线性运动方程

推导了两端固定和两端简支的弯曲薄板在其支承简谐激励下的运动微分方程,并利用Galerkin方法对其进行了离散化处理。     

利用虚拟仪器实现角速度波动率的采集和处理

利用NI 的PXI-6281高速数据采集卡来完成角速度波动信号的采集,借鉴信号失真度的概念,分析角速度反馈信号的基波和高次谐波大小,求取高次谐波与基波幅值比,作为角速度波动率.     

谐波传动共轭齿廓的运动学仿真研究

根据包络理论，通过建立谐波齿轮传动共轭齿廓分析的通用数学模型，在已知柔轮齿廓的条件下可求得与之共轭的刚轮理论齿廓的离散点，通过最小二乘拟合的方法求得刚轮的工作齿廓，并通过啮合区段干涉检验法来校验齿廓的重叠干涉，最后通过计算机程序对所求的刚、柔轮工作齿廓进行运动学仿真以验证所求工作齿廓的合理性，还通过实例对程序进行了验证。本文的方法为探索谐波齿轮用新型工作齿廓提供一条可行的途径，并使小速比谐波齿轮传动变得可行。     

基于FPGA的高准确度数字频率信号源设计

介绍了直接数字频率合成技术的实现方法,分析了其优越的技术特性。根据其特性,利用FPGA设计了高准确度的数字频率信号源。仿真结果表明,与传统的信号源相比,使用该方法实现的信号源,其信号种类多,准确度高,满足测试设备数字化、软件化的趋势。     

快速预热型铷原子振荡器的研制

介绍了一种快速预热型铷原子振荡器的设计方法和试验数据 ,3 5min的锁定时间、0 4 5L的小巧体积和良好的频率重现性能 ,非常适合于战术应用。     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.