杆的纵向振动分析

杆的纵向振动是连续系统的内容，一个连续系统具有分布质量，分丰弹性，分布阻尼，杆的纵向振动可用波动方程来描述，是用空间与时间坐标来描述的，运动方程是偏微方程。     

Aerosols on the Giant Planets and Titan

On the giant planets and Titan, like on the terrestrial planets, aerosols play an important part in the physico-chemistry of the upper atmosphere (P ≤ 0.5 bar). Above all, aerosols significantly affect radiative transfer processes, mainly through light scattering, thus influencing the atmospheric energy budget and dynamics. Because there is usually significant coupling between atmospheric circulation and haze production, aerosols may constitute useful tracers of atmospheric dynamics.More generally, since their production is directly linked to some kind of energy deposition, their study may also provide clues to external sources of energy as well as their variability. Finally, aerosols indirectly influence other processes such as cloud formation and disequilibrium chemistry, by acting either as condensation nuclei or as reaction sites for surface chemistry. Here, I present a review of observational and modeling results based on remote sensing data, and also some insights derived from laboratory simulations. Despite our knowledge of the effects of aerosols in outer planetary atmospheres, however, relatively little is understood about the pathways which produce them, either endogenously (as end-products of gas-phase photochemical or shock reactions) or exogenously (as residues of meteroid ablation).     

Modeling and Control for Magnetostrictive Hysteresis

To deal with the rate-dependent hysteresis presented in a magnetostrictive actuator, a new method of modeling and control is pro-posed. The relationship between inputs and outputs of the actuator is approximately described by a dynamic differential equation with two rate-dependent coefficients, each expressed as a polynomial of frequency. For a given frequency, the coefficients will be able to be estimated by approximating the experimental data of the outputs of the magnetostrictive actuator. Based on this model, a quasi-PID con-troller is designed. In the space of the coefficients and frequency, the stable domain of closed loop system with hysteresis is analyzed. The numerical simulation and experiments have born witness to the feasibility of the proposed new method.     

微磁强计弱磁处理芯片设计与实现

为适应微纳卫星平台的应用需求、实现磁强计的微型化,针对巨磁阻抗(GMI)效应微磁强计的研制需求设计并研制了弱磁信号处理芯片.在分析GMI微磁强计构造的基础上,针对单机(微)小型化提出了弱磁信号处理电路芯片化的方案;结合空间应用特点,设计并实现了基于SOI CMOS工艺的弱磁信号处理芯片.实测结果表明:基于所研制的弱磁信号处理芯片不仅实现了磁强计的微型化、集成化,而且具有良好的弱磁测量性能.     

纤维棒直径对轴编C/C复合材料拉伸强度的影响

为了研究增强相尺度对轴编C/C复合材料拉伸性能的影响,通过对具有不同直径纤维棒的材料微结构的观测,结合材料的细观和宏观力学性能实验,研究了纤维棒直径引起的材料拉伸性能变化。结果表明:在编织参数不变的情况下,纤维棒直径增加,棒内大尺度裂纹增多,降低了材料的拉伸强度,但模量变化不明显。     

超磁致伸缩材料及其在航空航天工业中的应用

介绍了超磁致伸缩材料在国内外发展状况,系统地比较了该材料各种制备方法的优缺点及其适用领域,采用真空感应熔炼和真空区熔定向凝固方法制备出 Tb0.3Dy0.7Fe1.95 超磁致伸缩合金,用 X-射线及光学金相分析了该合金的凝固组织形貌、微观结构和晶体择优生长方向。结果表明,该合金的铸态组织为树枝状的Mg Cu2 型 ( Tb,Dy) Fe2 和富稀土相两相结构。本实验条件下,该合金定向凝固形态为胞状晶和树枝晶,其晶体生长择优取向分别为〈1 1 0〉和〈1 1 2〉方向。同时介绍了超型磁致伸缩材料在航空航天工业中的应用前景     

S135钻杆的摩擦焊接、热处理对其组织与性能的影响

对S135钻杆同种钢材36CrNiMo4A的摩擦焊接、热处理工艺参数及其强韧性进行了试验分析和研究,分析了原有摩擦焊接和热处理工艺造成接头韧性偏低的原因,优化了摩擦焊接和热处理工艺参数,改善和提高了S135钻杆的组织和性能,达到甚至超过了同类产品NKKS135钻杆的组织和性能。     

超磁致伸缩材料作动器的研制及特性分析

 采用自制的TbDyFe超磁致伸缩材料设计并制作了主动振动控制用超磁致伸缩作动器 ,并对其偏置磁场、激励磁场、静态特性、动态特性和主动控制减振效果进行了测试和分析。研究结果表明 ,作动器工作应变在TbDyFe材料的线性区 ,其总伸缩量可达 70 μm。低频动态特性好 ,谐频影响小。在自适应滤波控制方式下使用该作动器对正弦振动进行主动控制减振 ,减振效果达到 30dB。磁场均匀性对作动器输出特性有明显影响 ,采用Ansys有限元软件精确设计作动器激励磁场 ,可提高超磁致伸缩材料沿轴向磁场均匀性。     

基于超磁致伸缩材料的FBG电流传感器温度特性研究

针对基于超磁致伸缩材料的FBG电流传感器,分析了温度对传感头各个部分和整个传感头的影响,通过试验研究了FBG、Fe—Ga超磁致伸缩棒以及传感头三个部分的温度特性。结果表明,FBG的温度特性为线性,Fe—Ga超磁致伸缩棒以及传感头的温度特性整体为非线性,Fe—Ga超磁致伸缩棒的温度响应大于FBG的温度响应,传感头的温度特性主要取决于Fe—Ga超磁致伸缩棒的温度特性。在26℃到60℃范围内,根据传感头的温度特性,可采取分段补偿的方法消除温度影响,将温度特性分为线性区和非线性区两个范围,分别得到了传感头温度特性拟合方程。     

射流伺服阀用放大型超磁致伸缩执行器建模及分析

为提高射流伺服阀的动态性能,设计了采用桥式微位移放大机构的射流伺服阀用放大型超磁致伸缩执行器(AGMA)。建立了计输入位移损失的放大机构模型以及非线性位移输出理论模型,并采用有限元法对所建放大机构模型进行了对比验证,结果表明:放大机构的输入刚度模型最大误差0.78N/μm,放大倍数模型最大误差0.22,放大倍数受输入位移影响较小。最后,试验研究了AGMA的静动态特性,结果显示:控制电流在-0.5A到0.5A缓慢变化时,AGMA输出位移约为78μm;当控制电流从-0.5A跃变到0.5A时,其峰值位移约为71μm,峰值时间约为0.014s,调节时间小于0.1s;当控制电流幅值为0.5A时,其输出位移幅频宽40Hz,谐振频率约为30Hz。