Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

燃气的基准表及图制定

本文在阐述基准的热力学概念基础上,提出了燃气基准的计算方法,应用CHAPPELL推荐的有关燃气热力性质表达式,导出计算燃气基准的公式,通过微机计算,将结果整理成燃气基准的有关表、图。     

舰载机着舰时航迹稳定性研究

本文讨论了舰载飞机以小于有利速度着舰时的航迹稳定性问题。在分析飞机航迹稳定性的同时,还对油门杆控制、机动襟翼控制对改善航迹稳定性的作用进行了初步探讨;在此基础上还讨论了舰载飞机加装波束导引系统对着舰过程的影响原理。结果表明:采用油门杆控制、机动襟翼控制来改善着舰阶段的航迹稳定性是可行的:而且用以上两控制系统作为内环的自动驾驶仪在波束导引系统自动导引飞机着舰过程中,能控制飞机的飞行速度、高度,帮助驾驶员操纵。     

Tunnel/predictor display with two-axis control coordination and simplification

A longitudinal-lateral control coordination and simplification concept is considered for a tunnel/predictor display, which presents the command flight path and a specified future aircraft position in a 3-dimensional format to the pilot, for improving flight path control. A basic element of the proposed concept is the generation of common longitudinal-lateral transfer characteristics of the predictor-aircraft system for the crossover frequency region. Control coordination is supported by a dynamics similarity between the longitudinal and the lateral response characteristics of the predictor position in closed-loop pilot control actions. The control coordination and simplification concept is considered to support the pilot in manual flight path control, directed at an enhancement of his control performance and at a reduction of his workload. Results from pilot-in-the-loop simulation experiments support the theoretical findings and show the effectiveness of the proposed predictor concept with control coordination.     

低轨道带可变翼的平板型极高真空分子屏

本文计算了在低轨道自由飞行的平板型分子屏（ＷａｋｅＳｈｉｅｌｄＦａｃｉｌｉｔｙ）加了可变翼后，分子屏后实验区的压力分布。计算中考虑了分子屏和翼材料出气对实验区压力的影响。本文并对加可变翼和不加可变翼、考虑出气和不考虑出气几种情形进行了计算和比较。我们的结果表明：给轨道分子屏加上可变翼后，其实验区的压力可比不加可变翼降低一个数量级以上，压力达１０－１３Ｐａ。本文的研究表明，这种给轨道分子屏加可变翼的模型对更好的利用分子屏环境是非常有利的。     

燃气收缩式作动器--一种新颖高效的着陆缓冲装置

文章介绍一种新颖的着陆缓冲装置——燃气收缩式作动器。可是在回收物体乘降落伞着陆前,通过回收物体快速向上（向降落伞方向）提升,抵消物伞系统的垂直下降速度,从而达到回收物体以很小的速度着陆,实现回收物体的软着陆。     

一种新型级间分离技术研究

本文对一种含固体燃气发生器的级间分离技术进行了研究。首先给出了分离的总体方案，建立了级间段气体压强瞬变的数学模型和导弹两级的运动模型，并利用流体动力学软件对级间段充气过程进行了模拟。简要介绍了固体燃气发生器的设计，并给出燃气发生器装药的选取原则。最后通过对某型号导弹的计算，证明这种级间分离方案是可行的。     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

燃气蒸汽式发射系统内弹道若干问题研究

通过对燃气蒸汽式发射动力系统的研究，总结出影响内弹道计算精度的若干因素，并就其中几个影响较大的问题进行了详细的分析，开发研制出了一套用于预估内弹道性能的系统化程序。通过实验数据的比较，验证了适用于内弹道计算的数学物理模型，为燃气蒸汽式发射系统设计提供参考依据。     

受激光控制分解式固体微推力器内流动特性研究

建立了描述激光控制分解式固体微推力器内流动特性的计算模型,对激光微推力器内流动进行了数值计算,计算值与实验结果吻合较好。分析了气体粘性和压强对激光微推力器内流动特性的影响。结果表明,微推力器内流动受低压、小尺寸的综合影响,喷管喉径小于0.8 mm时,气体粘性对推力器性能影响显著增强;提高推力器内压强是减小粘性影响的一种有效手段。