Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

航空发动机整机振动中的不平衡-不对中-碰摩耦合故障研究

针对航空发动机整机振动分析,建立了含不平衡-不对中-碰摩耦合故障的转子-滚动轴承-机匣耦合动力学模型.在耦合模型中,考虑了机匣运动,同时,充分考虑了滚动轴承间隙、非线性赫兹接触以及变柔性VC(varying compliance)等非线性因素;在耦合故障中,建立了不平衡、不对中和碰摩故障模型.运用数值积分方法获取了系统响应,研究耦合故障特征和规律.仿真计算分析表明了该模型的正确有效性.      

航空发动机数控系统多故障识别

提出了一种基于模糊逻辑的航空发动机数控系统多故障的识别方法.首先采用Takagi-Sugeno(T-S)模糊模型描述一种涡喷发动机数控系统的非线性模型,然后应用全解耦奇偶方程进行多故障的检测和隔离,并结合卡尔曼滤波器识别出传感器和执行器故障参数.仿真结果表明,针对传感器和执行器同时发生故障的情况,此方法能有效检测故障,并能准确识别出故障参数.      

飞机方向舵故障建模与侧风着陆仿真

基于风洞试验数据和CFD数据,建立了某型飞机上、下两片方向舵在松浮、卡滞和脱落等故障的数学模型;针对方向舵脱落故障,在飞行模拟器上进行了人在环的侧风着陆仿真试验,验证了模型的准确性,得到了与实际侧风响应相吻合的故障模型;最后,基于此模型探讨了方向舵故障下的侧风着陆安全性与驾驶员负荷.     

更替某型飞机电压限定器的研究

文章在介绍某型电压限定器工作原理的基础上,阐述了利用集成电路技术和自动控制技术进行该型电压限定器国产化研制的方法,给出了电压限定器探测及延时电路、均衡控制电路、防止误动作保护电路的详细设计方案,解决了激磁控制、均衡控制、故障鉴别等国产化研制过程中遇到的问题,保证了新研制产品与原有进口产品的可互换使用,提高了设备的工作可靠性。     

飞机排故方法模糊与统计综合评估算法的研究

针对民航飞机维修过程中故障描述对应的多种故障原因和排故方法,无法进行确定性选择问题,采用模糊综合评估理论,在统计已往维修经验数据的基础上,提出一种在各种故障原因和排故方法中进行选择的优先排序算法,进而解决了飞机故障诊断信息应用的关键问题,提高了排故速度。此评估算法已应用到民航的维修实践中。     

非线性系统的BP神经网络在线建模及故障检测

回顾了非线性系统建模、故障检测与诊断（ＦＤＤ）及ＢＰ神经网络应用中存在的问题。提出了一种ＢＰ网络在线阶段自学习方式及应用该方式对非线性系统进行在线建模和故障检测的方法。仿真结果表明,本文提出的方式和方法是可行的     

不对称电网故障下双馈风力发电机的比例-积分-谐振滑模控制器设计

针对不对称电网故障下,双馈风力发电机的控制策略进行了研究。讨论了电网故障时转子侧变流器(RSC)和网侧变流器(GSC)的控制目标,合理安排了电网严重故障时的控制优先级。基于比例-积分-谐振滑模控制原理设计了机侧和网侧变流器协同控制方案。通过MATLAB/Simulink仿真软件搭建了所设计控制方案的仿真模型。仿真结果表明,在电网正常运行的情况下,与传统的矢量控制策略相比,比例-积分-谐振滑模控制策略对输出功率、电流变化的响应更迅速,具有更好的动态性能和抗扰动能力;在电网不对称故障下,能够有效地抑制电磁转矩振荡和直流母线电压波动,提高了双馈式风力发电机的低电压穿越能力。     

导引头量测故障下的增量式三维制导律设计

考虑导引头量测故障下拦截机动目标的末制导问题,以提高制导系统的鲁棒性、降低制导增益、减小系统残差、避免视线角速率剧烈振荡/发散为目的,基于增量式控制方法设计了一种具有鲁棒增强特性的三维末制导律。首先,将末制导问题转化为零化视线角速率的控制问题。其次,通过弹目相对距离及视线角速率定义辅助变量,给出传统的滑模制导律作为设计参考。然后,基于增量式非线性动态逆滑模控制方法,充分挖掘视线角加速度估计信息及上一采样时刻的制导指令,得到增量式三维鲁棒制导律。最后,在目标机动及导引头量测故障下,分析并比较了两种制导律所产生的系统残差。理论分析及多工况仿真结果表明,增量式制导律不仅对目标机动及大范围失效的导引头量测故障具有强鲁棒性,而且所需制导增益也较小,同时避免了末端视线角速率严重发散的问题     

A discrete event systems approach to discriminating intermittent from permanent faults

Almost all work on model-based diagnosis （MBD） potentially presumes faults are per- sistent and does not take intermittent faults （IFs） into account. Therefore, it is common for diag- nosis systems to misjudge IFs as permanent faults （PFs）, which are the major cause of the problems of false alarms, cannot duplication and no fault found in aircraft avionics. To address this problem, a new fault model which includes PFs and IFs is presented based on discrete event systems （DESs）. Thereafter, an approach is given to discriminate between PFs and IFs by diagnosing the current fault. In this paper, the regulations of （PFs and IFs） fault evolution through fault and reset events along the traces of system are studied, and then label propagation function is modified to account for PFs and the dynamic behavior of IFs and diagnosability of PFs and IFs are defined. Finally, illustrative examples are presented to demonstrate the proposed approach, and the analysis results show the fault types can be discriminated within bounded delay if the system is diagnosable.