Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

Unsteady wakes-secondary flow interactions in a high-lift low-pressure turbine cascade

Detailed experimental measurements were conducted to study the interactions between incoming wakes and endwall secondary flow in a high-lift Low-Pressure Turbine (LPT) cascade. All of the measurements were conducted in both the presence and absence of incoming wakes, and numerical analysis was performed to elucidate the flow mechanism. With increasing Reynolds number, the influence of the incoming wakes on suppressing the secondary flow gradually increased owing to the greater influence of incoming wakes on reducing the negative incidence angle at higher Reynolds numbers, leading to a lower blade loading near the leading edge and suppression of the Pressure Side (PS) leg of the horseshoe vortex. However, the effect of unsteady wakes on suppressing the profile losses gradually became weaker owing to the reduced size of the Suction Side (SS) separation bubble and increased mixing loss in the free-flow region at high Reynolds numbers. Incoming wakes clearly improved the aerodynamic performance of the low-pressure turbine cascade at low Reynolds numbers of 25,000 and 50,000. In contrast, at the high Reynolds number of 100,000, the profile loss at the midspan and mass-averaged total losses downstream of the cascade were higher in the presence of wakes than in the absence of wakes, and the unsteady wakes exerted a negative influence on the aerodynamic performance of the LPT cascade.     

流动阻力及能量损失对注射成型制件的影响

本文分析了在塑料熔体充满型腔的过程中，流动阻力及能量损失产生的形式和物理原因，进而讨论了对塑料制件成型及凝固过程中的影响。并提出降低影响的措施。     

预测悬停旋翼跨音速流动的一种组合自由尾流/CFD方法

一种新的组合自由尾流 / CFD方法用于悬停旋翼流动的 CFD解中以考虑实际尾流的作用 .用文中描述的尾流分析方法研究了螺旋尖涡的运动 .首先从广义尾流模型开始 ,用半经验公式模化了涡核对旋翼尾流的作用 ;然后在环量收敛和尾迹收敛的条件下完成了自由尾迹计算 ;最后应用 Jameson有限体积龙格 -库塔推进格式求解了欧拉方程 .所得结果与相关文献和实验数据进行了比较     

ADI方法求解完全跨声速非定常小扰动方程

本文修改了Whitlow的ADI格式,以便求解另一变形的完全跨声速小扰动方程。本文给出的NACA64A006和NACA0012翼型的非定常跨声速流动的计算结果与其它数值结果和实验结果的比较表明本文格式是合理的且便于实际应用的。     

死亡是生命的必然归宿

本文根据物质系统演化的规律，平衡原理及熵理论，阐述了死亡是生命系统演化的必然归宿。     

滑阀稳态液动力的计算和分析

以液氧/煤油补燃循环火箭发动机中流量调节器中滑阀为例,介绍了滑阀稳态液动力的一种计算方法,分析了不同结构参数下稳态液动力的变化规律,得出了滑阀的稳态液动力与滑阀位移、液流出口处的流道形状以及刃边厚度关系的一些初步结论。     

马蹄涡结构的显示

对层流角区流动的动态流动模式进行了流动可视化实验研究.实验采用了脉冲氢泡发生器和录像系统对流场进行了显示和研究.通过实验发现,氢泡丝的布置是清晰显示角区流动的精细结构的重要因素.实验雷诺数范围为Reδ*=2.74×102～3.19×102.该实验的角区流动由在平板表面的长方形突起物产生.实验结果显示了主马蹄涡和反向二次涡的流动结构和流动过程.实验还发现了一系列新的流动现象,如马蹄涡的头部形成区域的流动过程及其在柱体上游形成"肩膀"的现象等.     

H-6部件与外挂天平的研制

介绍了H 6部件与外扌圭物测力试验的难点 :一是天平的设计载荷极不匹配 ,如机翼天平的滚转力矩是常规天平的 1 0多倍 ;二是模型尾部是船形尾段。采用常规的支撑方式 ,支杆强度太弱 ,试验不安全 ,同时也不利于多台天平的敷线 ,总体方案采用模型尾部与支杆合为一体的结构形式 ,既保证了试验安全又便于多台天平的敷线。天平设计首先保证试验安全 ,用双电桥提高天平的输出。试验结果表明 :总体试验方案正确 ,天平设计合理 ,支撑刚度好 ,测量精度高。     

一种外挂物连投的微机控制系统

本文扼要阐述了飞行器外挂物连投试验中用微机控制的测控自动化系统的原理、性能、软硬件设计和程序流程图。