平板缝隙溅击喷嘴冷流混合特性

作为变推力液体火箭发动机上环形缝隙式喷嘴基本特性研究的一部分,本文研究了溅板的加入,以及溅板几何尺寸的改变对喷雾场冷流混合特性的影响。结果表明,溅板的加入改善了流强与混合比分布。溅击角的增大和合成膜在溅板上撞击线的内移不同程度地提高了E_m值。合理的设计和准确控制喷注参数可以获得满意的流强与混合比分布。     

SPACE LIFE SCIENCE IN 2000-2001

Chinese scientists studied some of the problems in the field of space life science and achieved success in the area during 2000-2001. Space biological experi ments were carried out in the orbit and the results of ground studies on protein crystallization, space radiation, space motion sickness were introduced in this paper. The influences of simulated weightlessness on the brain-function, the car diovascular, endocrine hormones, immunity, skeletal and muscle systems were presented. In addition, gravity medicine and space environment medicine, as well as countermeasures to space deconditioning, such as the traditional Chinese medicine, were also reported.     

复合材料三角形层板稳定性分析与实验研究

 给出了正交异性三角形简支板和固支板临界载荷的计算方法。对5种不同铺层的14块碳/环氧层板进行了稳定性实验研究。理论预测与实验结果基本一致。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

尖侧缘机身布局的俯仰力矩特性及扰流板控制

针对尖侧缘机身布局在大迎角下存在的正俯仰力矩（抬头力矩）问题,通过风洞试验,首先研究了俯仰力矩的迎角分区特性及流动演化规律：线性增长区（迎角为0°~15°）,俯仰力矩线性增加,全机从附着流到形成进气道前缘涡和机翼涡;非线性增长区（迎角为17.5°~32.5°）,俯仰力矩非线性增加,机头涡出现,机头涡和进气道前缘涡逐渐增强,机翼涡增强后破裂;衰减区（迎角为35°~65°）,俯仰力矩逐渐减小,机头涡增强后破裂,进气道前缘涡破裂发展,机翼涡完全破裂。其次,发现了机身前体是产生正俯仰力矩的主要来源,机头涡是导致大迎角下正俯仰力矩的主控流动。当迎角为40°时,前体各截面正俯仰力矩在进气道前缘处达到最大,主要是由于该处机头涡诱导产生了较强的法向力。最后,提出了大迎角机身扰流板控制技术,产生了较好的控制效果。当迎角为40°时,扰流板可使正俯仰力矩减少62%,其原因是扰流板降低了机头涡涡量及其诱导产生的法向力,减少了机身前体对正俯仰力矩的贡献。该控制技术的缺点是扰流板会带来一些升力损失和附加阻力。基于尖侧缘机身参考宽度的雷诺数为2.59×10⁵。     

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

基于随机粒子追踪方法的环形燃烧室点火动态模拟

为了深入研究低排放燃烧室点火联焰规律,在全新的环形模型燃烧室中开展了点火模拟和试验研究。点火模拟采用随机粒子追踪方法,能够基于时均冷态流场的仿真结果快速模拟火焰传播过程。环形燃烧室包含16个中心分级旋流器,仅向预燃级通入丙烷,用于模拟航空发动机低排放燃烧室点火状态下的空气燃油分级。试验采用PIV技术测量3个头部区域流场,利用高速相机拍摄火焰CH*/C2*基团化学发光信号。对多个流量和当量比条件下的联焰过程、联焰时间和传焰速率进行了分析,试验和模拟的结果均表明：环形燃烧室内火焰双向传播,燃烧室内外环流速度差异导致了双向火焰传播速度差,传焰速率随燃烧室湍流速度和当量比的增加而增加。点火模型很好地捕捉了环形燃烧室点火动态,所得传焰速率也符合湍流火焰传播规律,表明该模型具有较强预测能力。     

改进型CLOR桨尖旋翼气动特性试验研究及数值分析

 通过风洞试验及数值模拟对具有改进型CLOR(CLOR-Ⅱ)桨尖的旋翼悬停和前飞状态气动特性开展研究。在CLOR桨尖旋翼试验及数值分析的基础上,考虑旋翼非定常流场特点,兼顾旋翼悬停和前飞气动性能,对旋翼桨叶的气动外形进行了改进,主要包括采用多种翼型优化配置以综合改善旋翼前行侧压缩性及后行侧桨叶失速特性,并考虑旋翼前飞状态对其桨叶动力学特性的需求,重新设计了桨尖前后缘的外形。在风洞中分别对3种旋翼进行多种状态条件下的试验研究,为从流动细节上获得不同桨尖旋翼的气动特性差别,采用计算流体力学(CFD)方法对试验状态进行了数值模拟对比。对更高转速状态进行模拟,结果表明相对于其他两种旋翼,CLOR-Ⅱ桨尖旋翼在改善跨声速特性和提高失速迎角等方面具有明显优势,而且综合提高了旋翼悬停和前飞气动性能。     

缝合复合材料层板面内力学性能试验与分析

研究多种缝合方向、缝合密度对复合材料层板面内拉、压、剪等基本力学性能和典型失效模式的影响，并结合理论模型分析缝合参数影响层板力学性能的机理。结果表明，缝合对层板面内性能有一定影响，缝合密度的增加导致层板面内性能下降，缝合方向对层板性能影响较大；试件破坏位于缝合针孔处；缝合造成的纤维弯曲和纤维断裂引起了较强的应力集中，是缝合影响层板力学性能的主要因素。     

降落伞伞衣载荷的性能试验

在改变伞衣面积和透气量的情况下,在定常风洞中对小型平面圆形伞的开伞过程进行了动态试验,研究了开伞过程中伞衣形状和伞衣所受载荷之间的动态关系.伞衣载荷不仅受降落伞阻力和附加质量变化率产生的力影响,同时,不稳定性及伞衣(绳)的抖动也是产生伞衣载荷的一个重要因素.稳定型伞衣充满后的载荷平均值约为最大开伞动载的60％左右,伞衣投影直径变化引起的呼吸现象也会引起载荷波动.透气量越大,降落伞稳定性越好,但降落伞的充气性能将会变差.该实验研究可为降落伞的载荷分析提供一定的依据.