卫星交会的自主导航技术

论述卫星交会自主导航的飞行任务背景和概念 ,综述国内外学者正在进行探索研究的思路 ,以期引起国内学者的的注意、探讨和深入研究。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

飞船的双冲量最优交会

本文利用作者在文献中所介绍的Clohessy—Wiltshire方法,在线性引力模型的假设下,求得了实现双冲量交会的最优解析解,即实现交会所需施加的两次冲量之和最小。数字仿真表明,本分析是正确的。     

Spacecraft optimal rendezvous controller design using simulated annealing

A new global approach for rendezvous Linear Quadratic controller design is presented in this paper. Instead of solving the algebraic Riccati equation, a continuous simulated annealing (SA) algorithm is used to design rendezvous LQ controller. Optimization of one automatic rendezvous controller with 18 design parameters is illustrated. The results show that the SA algorithm can locate the global solution effectively and robust, besides a great number of global solutions have been obtained by the SA. The SA has demonstrated better performance than other optimization algorithms such as floating-coded Genetic Algorithm, Simplex method and Powell algorithm.     

Precise line-of-sight modelling for angles-only relative navigation

This work presents a precise analytical model to reconstruct the line-of-sight vector to a target satellite over time, as required by angles-only relative navigation systems for application to rendezvous missions. The model includes the effects of the geopotential, featuring: the analytical propagation in the mean relative orbital elements (up to second-order expansion), the analytical two-way osculating/mean orbital elements’ conversion (second-order in $J_2$ and up to a given degree and order of the geopotential), and a second-order mapping from the perturbed osculating elements’ set to the local orbital frame. Performances are assessed against the line-of-sight reconstructed out of the precise GPS-based positioning products of the PRISMA mission. The line-of-sight modelled over a far-range one day long scenario can be fitted against the true one presenting residuals of the order of ten arc-seconds, which is below the typical sensor noise at far-range.     

天然金刚石刀具单激励超声椭圆振动车削

设计并制造了一种单激励夹心式纵弯复合椭圆振动车削系统.在分析超声椭圆振动切削抑制刀具崩刃机理的基础上,利用该系统进行了天然金刚石刀具振动车削铝件的试验,证实了椭圆振动切削可以有效防止刀具崩刃.     

三维极坐标视线动力学

阐述了极坐标视线动力学方程的研究现状。建立了三维极坐标视线动力学方程，讨论了该动力学方程的简化问题，得到了特殊平面（攻击平面）内的简化形式，该简化形式在特定的条件下与三维极坐标视线动力学方程是等价的。     

混合遗传算法在航天器最优交会中的应用

推导了航天器双冲量交会时的优化模型,以此为基础构造了最优交会的燃料-时间混合优化指标,并针对基本遗传算法局部搜索能力不强的问题,提出一种将最速下降法与遗传算法相结合的混合遗传算法,其中下降搜索的优化方向利用每一代中最劣个体所包含的优化信息获得。数值计算表明,该混合算法可加速算法的收敛,具有良好的优化性能和函数适应能力。最后,对共面圆轨道双冲量交会情况进行了仿真计算,仿真结果表明混合遗传算法的设计是成功的。     

交会对接任务碰撞规避策略制定研究简

针对交会对接任务目标飞行器与追踪器轨道运行特性,综合考虑规避策略计算方法与工程实际相结合的问题,提出高度规避、时间规避以及与正常轨控相结合的碰撞规避策略计算方法等三种空间目标碰撞规避策略计算方法.高度规避计算方法采用了Lambert飞行原理,用简化二体开普勒模型取代高精度轨道预报方法,迭代求解规避机动速度增量,实现了通过约束过交点与目标径向距离差得到速度增量的最优解;时间规避计算方法通过轨道周期与速度增量的关系,实现了通过约束过交点与目标的时间差得到速度增量的最优解;与正常轨控相结合的碰撞规避策略计算方法,在正常控制考虑冗余控制量的基础上,对控制策略的控制开始时间或沿迹方向的速度增量进行较小的修正,使两者通过碰撞点的时刻或径向距离错开,达到碰撞规避的目的,该方法不仅可以节省燃料、而且对任务的影响较小.通过对三种空间目标碰撞规避策略计算方法仿真分析结果表明,完全适用于交会对接任务,可为我国载人航天任务飞行安全提供技术保障.     

交会对接任务两目标协同控制技术研究简

在载人航天工程交会对接任务阶段,北京航天飞行控制中心首次实现了真正意义上的两目标协同控制,完成了协同体系构建、协同模式研究、协同技术攻关、协同方案设计、协同系统研制的完整技术演进过程.本文主要目标是对交会对接任务北京中心的两目标协同控制技术研究成果进行总结,主要涉及在交会对接任务协同控制技术体系构建、两目标关联计划工作模式、两目标注入安排协同设计与实施的经验与不足,通过对协同系统在交会对接任务中的实战应用情况,分析交会对接任务在协同自动化手段方面的成果和后续改进完善方向,为后续空间站任务设计和实现更复杂的多目标协同控制体系积累经验和教训.