万工显滑板移动直线度的检修

通过对影响万能工具显微镜滑板移动直线度的分析 ,提出有针对性的修理方法 ,并分别论述了产生线值偏差和角度偏差的主要原因。     

1:10人-椅模型上肢的跨-超音速风洞实验

 本文介绍了1:10人椅模型上肢跨-超音速风洞实验的结果。测量了Ma=0.5～2.04和攻角10°～20°范围内上肢的阻力和侧向力。获得了在握扶手和拉中央环两种姿态下手臂的气动力特性。比较了穿衣袖与不穿衣袖两种状态下手臂的气动力数据。实验结果为确定人体上肢对高速气流吹袭的耐久限度和设计防护措施提供了重要的气动力数据。     

基于灰色系统预测直升机航迹的研究

 反直升机智能雷对直升机航迹的预测在作战中非常重要,但在数据非常有限的情况下,准确地预测又很困难。提出了用灰色系统理论解决直升机航迹预测问题,建立了灰色系统 GM预测模型和 n次累加残差模型并对GM预测模型进行修正。在每个采样期间内,实时在线建立GM预测模型和残差模型以提高预测精度。通过实例计算能看出用较少的探测数据可以得到较高的预测精度。     

Orientations of LASCO Halo CMEs and their connection to the flux rope structure of interplanetary CMEs

Coronal mass ejections (CMEs) observed near the Sun via LASCO coronographic imaging are the most important solar drivers of geomagnetic storms. ICMEs, their interplanetary, near-Earth counterparts, can be detected in situ, for example, by the Wind and ACE spacecraft. An ICME usually exhibits a complex structure that very often includes a magnetic cloud (MC). They can be commonly modelled as magnetic flux ropes and there is observational evidence to expect that the orientation of a halo CME elongation corresponds to the orientation of the flux rope. In this study, we compare orientations of elongated CME halos and the corresponding MCs, measured by Wind and ACE spacecraft. We characterize the MC structures by using the Grad–Shafranov reconstruction technique and three MC fitting methods to obtain their axis directions. The CME tilt angles and MC fitted axis angles were compared without taking into account handedness of the underlying flux rope field and the polarity of its axial field. We report that for about 64% of CME–MC events, we found a good correspondence between the orientation angles implying that for the majority of interplanetary ejecta their orientations do not change significantly (less than 45 deg rotation) while travelling from the Sun to the near-Earth environment.     

Coronal mass ejection detection using wavelets,curvelets and ridgelets: Applications for space weather monitoring

Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic field that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and suppressing noise. However, wavelets are better suited to identifying point-like features, such as noise or background stars, than to enhancing the visibility of the curved form of a typical CME front. Higher order multiscale techniques, such as ridgelets and curvelets, were therefore explored to characterise the morphology (width, curvature) and kinematics (position, velocity, acceleration) of CMEs. Curvelets in particular were found to be well suited to characterising CME properties in a self-consistent manner. Curvelets are thus likely to be of benefit to autonomous monitoring of CME properties for space weather applications.     

基于雷达航迹的航空器质量估算

为保障基于轨迹运行的顺利实施,必须提高四维航迹预测的精度,而四维航迹的精准预测依赖于航空器质量准确估算。鉴于此,构建并分析了航空器能量模型;基于雷达航迹与航空器基础资料( BADA),提出了新型的航空器质量估算方法与步骤;利用最小二乘算法求解了航空器质量的估计值;分别基于预测航迹、雷达轨迹与QAR数据,采用相对误差作为评价指标,实施验证与分析。验证结果表明,提出的方法可将航空器质量估算误差控制在5%以内,从而能够有效地提高航迹预测精度。     

红外搜索跟踪系统单机运动测距方法研究

机载红外搜索跟踪系统只能测量目标的方位、俯仰角度信息,而无法直接获取目标的距离信息。因此需通过载机平台的机动运动,提高系统可观测性,从而对目标距离进行解算,为火控系统提供完整的目标运动参数,实现对目标的被动攻击。通过建立红外搜索跟踪系统（IRST）单机运动测距的数学模型,针对伪测距的非线性滤波的有偏特点进行了去偏处理,获得无偏的单机运动测距模型,并通过数字仿真进行算法模型的仿真验证,验证了算法的有效性。     

带稳定板装置弹射座椅偏航稳定性能研究

针对国内弹射救生领域现状,设计了一种适合于国内某型座椅的弹射救生系统稳定板。运用计算流体力学(CFD)数值计算方法,对改装稳定板前后的人椅系统进行了高速流场下的静态和动态特性分析,并与风洞试验结果进行对比,两者吻合较好。改装稳定板前后的数值计算对比表明:在不对俯仰和滚转性能产生不利影响的情况下,稳定板的改装对人椅系统的偏航性能有比较明显的改善。六自由度动态计算比较真实地模拟了弹射出舱的过程,也进一步验证了稳定板对改善偏航稳定性能所起到的作用。数值计算完全可以应用于弹射座椅的气动研究,同时稳定板的设计对工程上的应用具有一定的参考价值。     

基于傅里叶变换的航迹对准关联算法

研究了在组网雷达存在系统误差情况下的目标航迹关联问题,理论分析了雷达系统误差对目标航迹的影响,并将该影响表示为目标航迹的旋转和平移量。在此基础上,提出了一种基于傅里叶变换的系统误差配准前航迹对准关联算法,该算法将组网雷达的航迹数据看做为一种整体信息,采用傅里叶变换理论来估计和补偿组网雷达目标航迹数据到融合中心航迹数据的相对旋转量和平移量,将雷达网中雷达上报的目标航迹数据对准到融合中心,从而不依赖于估计雷达网系统误差,实现了误差配准前的航迹准确关联,能够为后端的系统误差配准提供可靠的关联目标航迹数据。     

环形脉冲爆震发动机引射性能

采用解析方法得出爆震波在爆震管内的参数分布,应用数值方法对爆震波衰退为激波后的传播、排除过程进行了多循环模拟.通过对环形爆震管非稳态引射过程的分析,得出非稳态引射过程可以分成四个阶段,环形爆震管比传统的圆形爆震管的引射作用更强.不同结构参数的引射喷管对环形爆震管的引射增推性能不同,经过分析,得到了较佳的引射喷管的入口尺...