1:10人-椅模型上肢的跨-超音速风洞实验

 本文介绍了1:10人椅模型上肢跨-超音速风洞实验的结果。测量了Ma=0.5～2.04和攻角10°～20°范围内上肢的阻力和侧向力。获得了在握扶手和拉中央环两种姿态下手臂的气动力特性。比较了穿衣袖与不穿衣袖两种状态下手臂的气动力数据。实验结果为确定人体上肢对高速气流吹袭的耐久限度和设计防护措施提供了重要的气动力数据。     

Orientations of LASCO Halo CMEs and their connection to the flux rope structure of interplanetary CMEs

Coronal mass ejections (CMEs) observed near the Sun via LASCO coronographic imaging are the most important solar drivers of geomagnetic storms. ICMEs, their interplanetary, near-Earth counterparts, can be detected in situ, for example, by the Wind and ACE spacecraft. An ICME usually exhibits a complex structure that very often includes a magnetic cloud (MC). They can be commonly modelled as magnetic flux ropes and there is observational evidence to expect that the orientation of a halo CME elongation corresponds to the orientation of the flux rope. In this study, we compare orientations of elongated CME halos and the corresponding MCs, measured by Wind and ACE spacecraft. We characterize the MC structures by using the Grad–Shafranov reconstruction technique and three MC fitting methods to obtain their axis directions. The CME tilt angles and MC fitted axis angles were compared without taking into account handedness of the underlying flux rope field and the polarity of its axial field. We report that for about 64% of CME–MC events, we found a good correspondence between the orientation angles implying that for the majority of interplanetary ejecta their orientations do not change significantly (less than 45 deg rotation) while travelling from the Sun to the near-Earth environment.     

Coronal mass ejection detection using wavelets,curvelets and ridgelets: Applications for space weather monitoring

Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic field that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and suppressing noise. However, wavelets are better suited to identifying point-like features, such as noise or background stars, than to enhancing the visibility of the curved form of a typical CME front. Higher order multiscale techniques, such as ridgelets and curvelets, were therefore explored to characterise the morphology (width, curvature) and kinematics (position, velocity, acceleration) of CMEs. Curvelets in particular were found to be well suited to characterising CME properties in a self-consistent manner. Curvelets are thus likely to be of benefit to autonomous monitoring of CME properties for space weather applications.     

自制等离子喷枪冷却系统的设计及测试

等离子喷枪是制备热障涂层中的研究重点。目前关于等离子喷枪的研究多集中于喷嘴(阳极)、阴极,鲜有关于喷枪冷却系统方面的研究;喷枪冷却系统的优劣直接影响喷枪的工作寿命和喷涂过程的稳定性,同时制备热障涂层的质量也与冷却效果紧密相关。本文利用三维模型,详细阐述了自制的喷枪冷却系统通道及工作原理,并对设计进行了理论计算,对自制的喷枪进行点火试验和喷涂测试,结果显示自制的喷枪冷却系统功能良好,喷枪工作稳定,涂层质量较好。     

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题,基于动态分层动网格技术,构建了含导弹运动和二次燃烧的内弹道数值模型,并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度,导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥,较大程度地缓解了冲击现象,获得了较好的平滑效果,筒底压力较实验装置降低了24.5%。     

带稳定板装置弹射座椅偏航稳定性能研究

针对国内弹射救生领域现状,设计了一种适合于国内某型座椅的弹射救生系统稳定板。运用计算流体力学(CFD)数值计算方法,对改装稳定板前后的人椅系统进行了高速流场下的静态和动态特性分析,并与风洞试验结果进行对比,两者吻合较好。改装稳定板前后的数值计算对比表明:在不对俯仰和滚转性能产生不利影响的情况下,稳定板的改装对人椅系统的偏航性能有比较明显的改善。六自由度动态计算比较真实地模拟了弹射出舱的过程,也进一步验证了稳定板对改善偏航稳定性能所起到的作用。数值计算完全可以应用于弹射座椅的气动研究,同时稳定板的设计对工程上的应用具有一定的参考价值。     

叶尖泄漏流和引射效应对跨声速串列转子失速机制的影响

为探究跨声速串列转子的失速机制,利用数值模拟的手段对不同间隙情况的某跨声速串列转子的叶尖流场进行分析.研究发现:前排二次泄漏区会对失速产生重要影响;叶尖泄漏流和引射效应是前排二次泄漏区流场结构的决定因素,而间隙大小直接影响着两者的强弱.当前排大间隙时,叶尖泄漏流强,是前排二次泄漏区流场的主导因素,这时失速首先发生在前排;当前排间隙减小时,引射效应增强,并逐渐成为主导因素,这时前排二次泄漏区的堵塞情况得到改善,失速区域转移到后排.改变前排间隙对该跨声速转子的性能有更显著的影响,当前排为最先失速排时,改变后排间隙对串列转子性能没有显著影响.      

黏性对高压空气弹射装置内弹道性能的影响

针对高压空气弹射装置中,气体黏性流动造成的内耗散和沿程损失对内弹道性能的影响,结合高压下空气黏度公式,重点考虑低压室内的黏性流动,得到了未充分发展黏性流体在非定常状态下的能量损失计算方法。基于高压空气真实气体效应分析,建立了考虑气体摩擦的高压空气弹射内弹道数学模型,进行了数值求解。对比结果表明:气体摩擦效应对快速、瞬时过程造成的干扰量较小,对象宏观特性变化不大,低精度系统中可忽略不计。通过对结果的规律性进行探究,发现摩擦效应降低了有用功的转化率,减缓了气体膨胀速率,造成低压室压力的非均匀分布、高压室到低压室的质量流量波动和弹体初始时刻的碰撞。      

战斗机弹射救生系统数值模拟研究

对弹射救生系统这种几何外形复杂、不规则非流线型钝体,以Jameson有限体积法为基础发展了一套基于高质量混合网格的Euler方程解算器,在Euler方程解算器基础上,采用S-A湍流模型发展了一套同样基于混合网格的N-S方程解算器,初步建立了适合弹射救生系统这类几何外形复杂物体的数值模拟技术平台,并采用多种加速收敛措施和合适的耗散项模型使得所发展的解算器在软件实现上鲁棒性很强。通过选取合适的计算起始迎角,对弹射救生系统成功地进行了大迎角和大侧滑角绕流计算,获得了与风洞试验比较吻合的计算结果,并且可以清楚地观察流场中马赫数分布、弹射救生系统各部位压力分布等流场细节,对弹射救生系统空气动力特性分析具有重要的指导意义。该计算平台可作为风洞试验的合理补充、加强和完善。     

小口径火炮身管的振动钻削试验研究

针对小口径火炮身管钻削加工时存在的切屑堵塞和内膛质量问题,设计了一套低频振动装置。通过振动钻削和普通钻削的对比试验,该装置能有效地解决堵屑难题,并提高身管的内膛钻削质量。