A comprehensive survey on the methods of angle of attack measurement and estimation in UAVs

Angle of Attack (AOA) is a crucial parameter which directly affects the aerodynamic forces of an aircraft. The measurement of AOA is required to ensure a safe flight within its designed flight envelop. This paper intends to summarise a comprehensive survey on the measurement techniques and estimation methods for AOA, specifically in Unmanned Aerial Vehicle (UAV) applications. In the case of UAVs, weight constraint plays a major role as far as sensor suites are concerned. This results in selecting a suitable estimation method to extract AOA using the available data from the autopilot. The most feasible and widely employed AOA measurement technique is by using the Multi-Hole Probes (MHPs). The MHP measures the AOA regarding the pressure variations between the ports. Due to the importance of MHP in AOA measurement, the calibration methods for the MHP are also included in this paper. This paper discusses the AOA measurement using virtual AOA sensors, their importance and the operation.     

Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress

Marciniack–Kuczinski (M–K) model is widely used to predict material’s forming limit curve (FLC). The prediction of FLC traditionally neglected through-thickness normal stress. However, it cannot be neglected in some forming processes. Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress. In addition, based on Nakazima test process, the ratio of through-thickness normal stress and maximum principal stress has been derived, which was a function of instantaneous thickness and loading path. Here, initial groove angle in M–K model was not considered. In this paper, uniaxial tension tests and Nakazima tests were performed on 7B04 aluminum alloy. Based on Hill 48 yield criterion and M–K model, the prediction model of FLC was established. The increase of thickness can enhance FLC. Meanwhile, it is necessary to consider through-thickness normal stress and initial groove angle in prediction model. On the left side of FLC, the effect of initial groove angle on FLC is weakened by increasing sheet thickness. On the right side of FLC, the effect of initial groove angle on FLC is strengthened by increasing sheet thickness. On the right side of FLC, the relation between limit strain points with different thicknesses is linear under one certain loading path. Thickness has decisive effect on through-thickness normal stress level and the changing trendy of through-thickness normal stress during calculation is different under different stress condition.     

薄膜充气管充气展开特性试验

用展开导轨消除因重力产生的摩擦力,在不同充气速率与初始展开角条件下对薄膜材料充气管的充气展开特性进行了试验研究,获得了展开角,以及展开加速度和内气压的变化规律。试验及分析结果表明:充气管的充气膨胀与展开相互独立,充气膨胀过程近似为等压增容过程,折叠部位的气压变化特性与整体气压变化特性差异明显。     

现场动平衡技术在生产中的应用

利用美国恩泰克公司提供的DP1500数据采集仪及现场动平衡软件,以实例说明了现场动平衡技术在锅炉引风机、排粉风机、电动机、机泵等转动设备不平衡故障排除中的应用,介绍了不平衡故障的识别方法,揭示出该技术在生产中的实用性、先进性和经济性.     

电液位置伺服系统的动态试验研究

本文研究了快速响应的电液位置伺服系统动态试验,着重讨论了在实践中如何选择伪随机二位式最大长度序列(PRBS)参数的问陋,并提出快速响应系统PRBS参数选择的原则,使系统辨识精度提高约15％。     

基于磁场映像的印制电路板故障诊断方法研究

简要分析了印制电路板的电磁场，提出了用电磁感应法测量磁场的电咱故障诊断新方法，并给出了测试系统组成方案。最后通过验证实验证明了该方法是确实可行的。     

满足约束的Gn连续过渡曲面的构造

在Erich Hartmann提出的由两基曲面线性组合构造G^n连续过渡曲面方法的基础上，针对该方法存在很难找到合适的参数变换的问题，提出了一种基于基曲面局部区域重新参数化构造G^n连续过渡曲面的方法。通过对基曲面上切触线附近区域部分曲面重新参数化，再由重新参数化局部基曲面线性组合构造G^n连续过渡曲面。这样将两基曲面间构造过渡曲面的问题转化为在重新参数化局部基曲面间构造过渡曲面。以构造G^1连续的翼身融合面为例，讨论了满足约束要求条件时G^2连续过渡面的构造方法。即先对基曲面上过渡切触线附近的局部区域进行重新参数化，后通过优化求解来确定比例因子和偏移量、平衡因子和调配因子，使过渡曲面满足前后边条线约束，最后利用线性组合来构造G^2连续的过渡面。约束过渡曲面的形状可通过改变重新参数化基曲面的大小来调整．     

八丝热线探针制作及其应用

介绍了八丝热线探针的制作工艺,有效地消除了各热丝探头之间的电信号干扰和动力学干扰。实验中使用该探针检测到了湍流边界层内的大尺度旋涡,并测量了它们的强度和尺度。与此同时还获得了速度、湍流强度和功率谱等流场参数,结果与现有典型数据一致。说明本文所述的多丝热线探针具有很强的实用性。     

死亡是生命的必然归宿

本文根据物质系统演化的规律，平衡原理及熵理论，阐述了死亡是生命系统演化的必然归宿。     

动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制