Urca processes in dense matter and neutron star cooling

Urca-processes were introduced into astrophysics by Gamow and Schoenberg in 1941. Neutrino cooling resulting from urca-processes plays an important role at the latest stages of evolution of massive stars. Recent work on neutrino emissivity of dense matter shows that neutrino cooling via urca-processes could determine the thermal evolution of young neutron stars and depends dramatically on the composition of the neutron star core. In particular, if a neutron star contains a central core in which the direct urca-process is operative, the cooling timescale shortens by many orders of magnitude.     

篦齿封严装置减振方法研究及减振装置设计

本文研究了用于篦齿封严装置的干摩擦式阻尼减振器的减振原理,采用篦齿封严装置气弹稳定性分析方法,分别研究了用于篦齿封严装置的阻尼环和阻尼套筒的减振效果,并在此基础上提出了阻尼减振器的工程设计方法。研究表明,干摩擦式阻尼减振器可以有效地提高篦齿封严装置的气动弹性稳定性。     

Evolution of low-mass stars. implications for the dark matter distribution in the halo

We present up-to-date evolutionary models of low-mass stars, from M0.6 M down to the hydrogen burning minimum mass, using recent equation of state and synthetic spectra calculations. Comparison is made with observed luminosity function for these objects. We also present implications for the dark-matter distribution in the galactic halo.     

干摩擦阻尼对旋翼动稳定性的影响研究

为了提高旋翼动稳定性理论模型的分析精度,需要精确地确定旋翼系统的结构阻尼系数。为此建立了旋翼变距拉杆球头关节干摩擦的阻尼模型,计入了球头关节的离心力对干摩擦阻尼的影响,然后用模型旋翼试验数据对稳定性分析结果进行了验证。结果表明,采用文中建立的干摩擦阻尼模型,预估的旋翼摆振后退型模态阻尼与试验数据吻合。     

基于流-固耦合传热的热气防冰系统干空气飞行蒙皮温度场计算研究

以机翼热气防冰系统为研究对象,建立了包含热气防冰系统防冰腔内外流场对流换热和固体结构导热的三维稳态流-固耦合传热物理模型,对整个计算区域生成混合网格,边界条件为第三类边界条件,采用计算流体力学方法以 FLUENT 软件为工具,对干空气飞行状态下流-固耦合传热模型进行了求解,获得防冰腔蒙皮内外表面对流换热系数分布和温度场结果,并对计算结果进行了分析。结果表明：防冰腔铝合金蒙皮沿展向和厚度方向导热显著,温度分布较均匀,防冰引气温度为200℃时,防冰腔蒙皮内外表面上最高温度为101℃,最低温度为21℃,3 mm厚的蒙皮同一点处内外表面最大温差仅为4℃,防冰腔排气口处气体的平均温度为63℃。热气防冰系统蒙皮温度场计算方法和计算结果,能够为热气防冰系统干空气飞行试验设计和测试中温度传感器的选型与布置提供依据。     

基于接触状态分析的叶冠阻尼评估与改进设计

采用基于接触状态分析的干摩擦阻尼结构设计方法,针对某型带冠涡轮叶片进行了阻尼评估与改进设计.接触状态包括接触形式和接触参数,通过接触形式从结构上判断结构设计的合理性;通过接触参数从力学性能上评价叶冠的阻尼效果.对叶片的动力特性、接触状态和振动响应进行综合评估分析,找出叶冠结构设计不足之处,并指出具体的改进措施,使叶冠的接触状态及振动响应得到一定的改善,并找到叶冠弦宽稳定工作范围.接触状态能够细致反映出叶冠工作状态下真实的接触情况,为叶冠结构设计和阻尼效果判定提供了更准确、详尽的参考依据.     

Orbital phase spectroscopy of four high mass X-ray binary pulsars to study the stellar wind of the companion

Our work focuses on a comprehensive orbital phase-dependent spectroscopy of the four High Mass X-ray Binary Pulsars (HMXBPs) 4U 1538-52, GX 301-2, OAO 1657-415 and Vela X-1. We hereby report the measurements of the variation of the absorption column density and iron-line flux along with other spectral parameters over the binary orbit for the above-mentioned HMXBPs in elliptical orbits, as observed with the Rossi X-ray Timing Explorer (RXTE) and the BeppoSAX satellites. A spherically symmetric wind profile was used as a model to compare the observed column density variations. Out of the four pulsars, only in 4U 1538-52, we find the model having a reasonable corroboration with the observations, whereas in the remaining three the stellar wind seems to be clumpy and a smooth symmetric stellar wind model appears to be quite inadequate in explaining the data. Moreover, in GX 301-2, neither the presence of a disk nor a gas stream from the companion was validated. Furthermore, the spectral results obtained in the case of OAO 1657-415 and Vela X-1 were more or less similar to that of GX 301-2.     

考虑摩擦的空间抓捕过程碰撞动力学分析与控制

目前针对空间抓捕中的碰撞进行建模的方法中很少考虑摩擦因素。然而,摩擦作为碰撞过程中不可避免的现象,对碰撞动力学响应及整个空间抓捕任务有着不容忽视的影响。文章结合库伦摩擦理论和拉格朗日乘子法,建立了同时兼顾滑动和粘滞状态的摩擦模型,然后将求解到的摩擦力与碰撞力进行矢量合成,作为对碰撞模型的修正。另外,针对碰撞过程对机器人姿态产生的干扰,利用反 馈线性化设计了解耦控制器对基座姿态漂移进行稳定控制。数值仿真采用一个平面2灢DOF空间机器人,利用动量和动量矩守恒定理验证了动力学模型的正确性,同时基座姿态控制结果收敛说明了控制器的有效性。     

The role of AVDR in linear cascade testing

Linear cascade testing plays an important role in the research and development of turbomachinery and is widely used over the world.The ideal cascade model of a turbomachinery blade row is two-dimensional.In actual linear cascade testing, the flow through the test section converges due to the development of the boundary layer and secondary flow along the sidewall surfaces of the test section.Axial velocity density ratio(AVDR) is adopted to account for the deviation of the tested cascade flow from the ideal 2D model.Among numerous published cascade works, the influence of AVDR on cascade performance is seen to be complicated with many affecting factors, such as those related to cascade/blade geometry and flow conditions.Also, controlling AVDR is limited by the facility capability.Furthermore, real blade-to-blade flow in turbomachines is usually associated with AVDR greater than unity due to limited span of blades between the hub and shroud such that cascade testing without reducing AVDR could be favored sometimes.All these facets add complexity and diversification to the matter.The current paper reviews previous studies and results on AVDR.Consolidated understanding on the role of AVDR and recommendations on how to deal with it in linear cascade testing are provided.      

热塑性定型剂对干铺丝-RTM工艺及力学性能影响

为了研究热塑性定型剂的添加对干铺丝-树脂传递模塑（RTM）工艺的影响,采用PA-6作为热塑性定型剂,通过T-剥离确定定型剂的质量分数,结合试验和工艺仿真,研究了定型剂对预制体面内渗透率的影响,并对其充模过程进行工艺仿真和分析,在此基础上研究了定型剂对环氧复合材料制品层间性能及韧性的影响。渗透率试验和仿真结果表明:加入定型剂后,纤维预制体的沿纤维和垂直纤维的面内渗透率分别降低了55.5%和52.0%;工艺仿真结果与试验结果一致,不同渗透长度下的注胶时间偏差均小于10%。力学性能试验结果表明:加入热塑性定型剂可显著提升环氧树脂复合材料的韧性,Ⅰ型和Ⅱ型层间断裂韧性分别提高了89.3%和54.1%,冲击韧性提高了18.7%,复合材料的层间剪切强度降低了23.6%。