轮盘端面齿连接的周向拉杆转子刚度研究

针对轮盘端面齿连接的周向拉杆转子模型,理论分析得到转子各组成部分刚度计算方法.应用商业有限元软件ANSYS,基于三维有限元非线性接触算法计算预紧力下轮盘端面齿连接段的弯曲刚度和扭转刚度,得到刚度修正系数和刚度无量纲系数.分析周向拉杆刚度和轮盘刚度的关系,提出拉杆刚度比例系数.计算结果表明:刚度系数无量纲系数小于1时,刚度修正系数保持不变;刚度无量纲系数大于1时,此时预紧力不足,齿面发生滑移,刚度修正系数会突然降低,拉杆弯曲刚度比例系数会增加.刚度无量纲系数具有明确的物理意义,可为带端面齿的燃气轮机转子设计和故障诊断提供参考.      

转子分区循环对称接触应力分析

 通过光弹实验表明了端齿连接转子受力的分区循环对称性。针对这~特性建立了各循环对称分区的循环对称接触有限元应力分析方法,并利用叠加原理将各循环对称分区间过渡区化为几个小规模的循环对称问题。     

Structurally coupled characteristics of rotor blade using new rigid-flexible dynamic model based on geometrically exact formulation

In rotor dynamics, blades are normally modelled as a slender beam, in which elastic deformations are coupled with each other. To identify these coupling effects, new rigid-flexible structural model for helicopter rotor system is proposed in this paper. Finite rotations of the whole blade(on flapwise, lagwise, and torsional) are described as three global rigid degrees of freedom.The nonlinear deformation geometrics of the beam is built on geometrically exact beam theory.New expressions for blade ...     

端齿连接转子轴向松弛力（压紧力）计算

 将端齿连接转子的零部件简化归并为４类结构，利用弹性力学、壳体理论、有限元素法及多变量函数插值技术等手段，导出各类结构轴向柔度系数的工程计算表达式，并给出离心力、气动力、热载荷及机动载荷等在各端齿接触面处引起的轴向松弛力或压紧力的计算公式。还介绍了根据本文提出的方法及公式开发的计算机程序，并给出了其应用实例     

高效液力偶合器轮系参数分析研究

高效液力偶合器额定工况无滑差的特点,使大功率（＞ ３００ ｋ Ｗ ）液力偶合器发热问题得到根本解决。就其设计方法进行分析,提出了斗轮及斗叶数的确定方法,并通过样机试验了解该偶合器的特性。     

挠性膜片联轴器优化设计

本文改进了Ｐｏｗｅｌｌ的直接优化方法，提出了有效的约束函数法，并用此法研究了膜片联轴器在强度刚度振动条件下，以重量轻，刚度最小为目标的优化设计计算，基于膜片的强度，刚度是在有限元分析基础上的，必须要很好地解决有限元前置处理（自动分单元、分载荷）和后置处理（绘等值线）。开发了一套比较完善的膜片外形优化设计软件系统，简称ＯＤＦＣ系统。     

圆弧端齿对涡轮螺栓连接影响的数值研究

为验证某型民用航空发动机涡轮总体设计方案的可行性和安全性,以该型航空发动机涡轮的圆弧端齿连接结构为研究对象,利用有限元数值模拟方法研究了涡轮第1级盘与前轴之间采用圆弧端齿连接的设计对结构强度和疲劳失效的影响,分析了在高温及不同预紧力载荷工况下对圆弧端齿连接强度、疲劳等性能的影响规律.研究表明:该设计存在涡轮第1级盘与高压涡轮轴连接的外端齿分离而导致振动的风险,而增大预紧力可以提高螺栓连接传递荷载的能力,但螺栓孔边存在局部高应力问题.研究结果为圆弧端齿的设计方案提供了有效理论支撑和参考.     

DISTRIBUTED OPTIC－FIBER FORCE SENSOR BASED ON MODE COUPLING EFFECTS IN HIGH－BIREFRINGENT FIBER

ＤＩＳＴＲＩＢＵＴＥＤＯＰＴＩＣ－ＦＩＢＥＲＦＯＲＣＥＳＥＮＳＯＲＢＡＳＥＤＯＮＭＯＤＥＣＯＵＰＬＩＮＧＥＦＦＥＣＴＳＩＮＨＩＧＨ－ＢＩＲＥＦＲＩＮＧＥＮＴＦＩＢＥＲＬｕｏＦｅｉ（ＤｅｐａｒｔｍｅｎｔｏｆＴｅｓｔｓＭｅａｓｕｒｅｍｅｎｔｓＥｎｇｉｎｅ...     

Time-varying linear control for tiltrotor aircraft

Tiltrotor aircraft have three flight modes: helicopter mode, airplane mode, and transition mode. A tiltrotor has characteristics of highly nonlinear, time-varying flight dynamics and inertial/control couplings in its transition mode. It can transit from the helicopter mode to the airplane mode by tilting its nacelles, and an effective controller is crucial to accomplish tilting transition missions. Longitudinal dynamic characteristics of the tiltrotor are described by a nonlinear Lagrange-form model, which takes into account inertial/control couplings and aerodynamic interferences. Reference commands for airspeed velocity and attitude in the transition mode are calculated dynamically by visiting a command library which is founded in advance by analyzing the flight envelope of the tiltrotor. A Time-Varying Linear (TVL) model is obtained using a Taylor-expansion based online linearization technique from the nonlinear model. Subsequently, based on an optimal control concept, an online optimization based control method with input constraints considered is proposed. To validate the proposed control method, three typical tilting transition missions are simulated using the nonlinear model of XV-15 tiltrotor aircraft. Simulation results show that the controller can be used to control the tiltrotor throughout its operating envelop which includes a transition flight, and can also deal with vertical gust disturbances.     

Control-oriented modeling of a high-aspect-ratio flying wing with coupled flight dynamics

The flight-structural dynamics of a high-aspect-ratio wing challenge the flight control design. This paper develops a reduced model of coupled dynamics with stability consideration. The structural dynamics are formulated with dihedrals, and the central loads drive the deformation. The control-oriented model with essential coupled dynamics is formulated. Modal sensitivity analysis and input–output pairing are performed to identify the control structure. Besides, an example of flight control design is provided to discuss the necessity of considering structural dynamics in controller design. Analytical coupled flight dynamics provide a system-theoretic approach for stability and facilitate model-based control techniques. Simulation results reveal the characteristics of flight-structural coupled dynamics and demonstrate that the influence of flexible modes should be considered in control design, especially in lateral dynamics.