Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

浮栅ROM器件的质子辐射效应实验研究

给出了浮栅ROM器件的质子辐射效应实验结果.认为浮栅ROM28C256和29C256的质子辐射效应不是单粒子效应,而是质子及其次级带电粒子产生的累积剂量造成的总剂量效应.器件出现错误有个质子注量阈值.对于29C256,高温加电退火容易消除质子产生的辐射损伤;对于28C256,高温加电退火不易消除质子产生的辐射损伤.动态监测和静态加电的器件都出现数据错误,且不能用编程器重新写入数据.然而不加电的器件在更高的质子注量辐照下未出现错误.对于应用浮栅ROM器件的航天器电子系统,冷备份是提高其可靠性的有效手段之一.     

Numerical investigation on flow nonuniformity-induced hysteresis in scramjet isolator

Numerical simulation and theoretical analysis were conducted to study the hysteresis inside scramjet isolator during the reciprocating process of back pressure variation. It is revealed that only a regular reflection is theoretically possible for two leading shocks when the inflow Mach number is greater than 2.0, and no hysteresis can occur in the transition between shock reflection types. Nevertheless, wall suction, gas injection, and background waves cause non-uniformity of the incoming flow and would make hysteresis possible. Besides the classical hysteresis in the transition between shock reflection, new kinds of hysteresis were found in both the deflection angle of separated boundary layer and the location of the shock train. Moreover, the occurrence of hysteresis in the deflection angle of the separated boundary layer is accompanied with the shock reflection hysteresis. In the case with background waves or gas injection, hysteresis in the starting position of leading shock was observed too. As back pressure decreases, the leading shock does not follow the same path as that as the back pressure increases, and it is anchored at the location where the background shock or the injection interacts with the leading shock. It is inferred that, if two strong adverse pressure gradient regions move towards and interact with each other, hysteresis will take place when they start to separate.     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

流场可压缩性对涡相互作用影响的数值研究

涡相互作用作为冲压发动机喷注装置的典型抽象流动现象,研究其可压缩性影响对于认识包含化学反应的真实燃料喷射场具有一定基础理论价值。基于经过数值验证的可压缩Navier-Stokes算法与压力泊松方程初始条件设置方法研究流场可压缩性对涡相互作用演化过程的影响。结果表明,以较高涡旋马赫数表征的可压缩性在改变涡对形态的同时,具有延缓涡旋相互靠近,迟滞融合进程的作用。关于涡对系统开始融合的临界条件,可压缩相互作用开始的临界展弦比与无量纲时间相比于低速涡对明显提高。为在无量纲时间意义下统一不同马赫数涡对相互作用的进程,从涡心密度随时间变化规律出发在不可压涡对特征时间的基础上,初步构建了考虑可压缩性的时间尺度修正关系。     

计算气动光学研究进展

计算气动光学是采用数值计算的方法研究高速空气动力流场对光波传输和光学成像影响的一门交叉学科,在红外成像制导设计等工程应用中发挥着重要的作用。总结了计算气动光学研究的三种基本计算方法,包括基于CFD简化方法的光学统计估算、基于RANS流场的计算和基于LES/DNS瞬态流场的计算,对这三种计算方法的基本理论、计算过程进行了介绍,综述了新近的一些计算气动光学研究进展,最后指出了未来的研究重点和方向。     

低雷诺数下小展弦比机翼的气动力优化设计

以固定翼式微型飞行器为研究背景,针对小展弦比机翼,将遗传算法与Navier-Stokes方程数值解法相结合,提出了一种以实数编码为基础的数值优化模型.流场数值模拟采用人工压缩方法,遗传算法采用锦标赛选择、自适应交叉和变异操作算子,对微型飞行器机翼选取五个设计点分别进行了升阻比优化设计.优化结果表明,本文的优化模型具有较高的搜索效率和显著的优化效果,五个设计点机翼的升阻比均提高30%以上.优化后的翼面接近椭圆形状,翼型前缘钝厚,尾缘向上拱起,这种形状能大大增加升力,降低诱导阻力,从而显著提高机翼的气动性能.     

全权限数字电子控制器雷电试验方法研究

在分析机载设备雷电感应敏感度试验相关标准的基础上,对全权限数字电子控制器雷电间接效应试验方法进行研究。对雷电间接效应耦合方式进行了分类,并以某型全权限数字电子控制器为例,介绍了数字电子控制器雷电感应瞬态敏感度试验波形组、试验电平选择方法及试验过程。并对空客和波音公司机载设备雷电感应瞬态敏感度试验方法做了初步介绍。研究成果可供制定机载设备雷电防护要求及试验方案时参考。     

基于SRAM型FPGA单粒子效应综合防护技术

为解决基于SRAM(Static Random Access Memory,静态随机存储器)型FPGA(Field Programmable Gate Array,现场可编程门阵列)的扩频应答机在空间环境中时常发生功能故障的难题,提出了一种低轨卫星基于SRAM型FPGA的应答机的单粒子综合防护方案。该方案在代码级、器件级、单机级、整星级综合采用器件优选、结构屏蔽设计、巡检自愈、自主复位等多种方法,有效杜绝了单粒子事件带来的种种危害,已成功应用于某在轨卫星。在轨测试结果表明:遥测、遥控、跟踪测量等功能、性能指标满足任务要求,且未发生需要地面干预的问题或现象。该技术还可推广应用于其他采用低等级器件及其他类型FPGA、DSP(Digital Signal Processing,数字信号处理)等大规模集成电路的星载单机防护。     

月尘环境效应及地面模拟技术

介绍了月球尘的特点及其对探月活动的影响。在分析月球尘环境及其对月面探测器污染、磨损、阻塞、静电效应的基础上,对月球尘环境模拟技术、月球尘扬尘及其运动学和动力学规律、月球尘效应防护及试验评价方法等研究方向和重点提出了一些初步看法。针对研究内容的需求,梳理出一台完整的月球尘地面模拟试验设备应具备真空、温度、太阳风、太阳紫外、月球尘、月面电场、月面磁场等环境因素。在此基础上,设计了一种月球尘地面模拟试验装置方案,并对月球尘环境效应试验方法进行了初步讨论。为月球探测后期任务条件保障建设及相关研究工作提供参考。