Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.     

复合材料层板中就位横向拉伸强度的研究

本文利用弹性力学和断裂力学方法对纤维增强复合材料的横向拉伸强度进行了分析，其中考虑了９０度开裂层厚度和开裂邻层的约束效应的影响，推导出正交各向异性对称铺层中昨合就位横向拉伸强度的数学表达式，得出开裂层的厚度和约束邻层铺设角对就位横向拉伸强度都有影响的结论，理论计算与Ｆｌａｇｇｓ实验结果吻合较好。     

关于危险品运输的紧急救援

危险品运输是技术要求最高的一类特种货物运输。在运输、装卸及贮存保管过程中,稍有不慎便会发生事故,造成人身伤亡和财产毁损。笔者认为:灾害=事故十损失。严格执行危险品运输规章,减少事故发生率,从技术上进行要求。仅是问题的一个方面。而另一方面还应立足于事故发生后的紧急救援,以最大限度地减少损失,两者并重才不致酿成灾害。为此,提出了建立“危险品运输紧急救援中心”的建议。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

离心铸造Al—20wt%Si合金自生表面复合材料的组织与性能

采用热模金属型离心铸造Al－20wt％Si合金，获得了外层聚集粗大初晶Si、中层为共晶组织、内层聚集细小初晶Si的自生三层表面复合材料。考察了复合材料的组织形貌，检测了复合材料的硬度和耐性，分析了复合材料的断裂模式。     

计算机辅助工时定额管理系统

介绍了南飞公司劳资处开发的计算机辅助工时定额管理系统的主要功能，系统特点及运行效果等。     

四喷管射流流场的数值模拟及分析

本文分析了ENO格式的特点，并应用于全NS方程的迁移项和压力项，模拟了三维射流，首先计算了四喷管射流干扰流场，给出了相应的计算结果，指出了其四股射流外部有形成类似一股射流波系的趋势，而内部四股射流始终存在并相互作用，且伴随流对内部干扰流场有重要影响；然后计算了四股射流流入圆管内的流场，给出了壁面和截面物理量的分布，分析了其拓扑结构。     

浅谈BOT模式在基础设施建设中的应用

本文首先介绍了BOT的基本含义、优点及应用，其次通过举例证实了以BOT模式建设基础设施的可行性及良好的发展趋势，最后展望了BOT发展前景。     

基于箭体系的最佳解耦姿态控制方法

提出运载火箭姿态控制的一种最佳解耦控制方法。传统的运载火箭姿态控制，是通过对火箭在制导坐标系（发射惯性坐标系）中定义的欧拉角，形成俯仰、偏航、滚动三个独立回路的姿态控制指令，控制弹体姿态稳定、快速地跟踪指令姿态角。由于控制力矩是分别绕箭体轴给出的，而箭体轴通常与欧拉角的瞬时转轴不重合，所以造成三个控制回路的耦合（只有当偏航、滚动姿态角皆为零时才完全解耦），因此欧拉角控制的解耦问题成为许多学者的研究课题，并给出了一些解耦控制方法，但都比较复杂，实现困难。本文提出的最佳解耦控制方法是基于箭体坐标系的，该方法是根据实时确定的箭体系到指令箭体系的方向余弦矩阵，确定一组箭体系分别绕各轴的转角△θx1，△θy1,△θz1，即箭体各轴同时转动角△θx1，△θy1,△θz1，后可使箭体系与指令箭体系重合，这样便保证了解耦和最小转角的最佳控制。该方法成功地应用于大范围机动变轨控制，也将适用于其它轴对称飞行器的控制。