Study of highly perturbed spacecraft formation dynamics via approximation

This paper explores methods for approximating and analyzing the dynamics of highly perturbed spacecraft formations with an emphasis on computationally efficient approaches. This facilitates on-board computation or rapid preliminary mission design analysis. Perturbed formation dynamics are often approximated as linear time-varying (LTV) systems, for which Floquet theory can be used to analyze the degree of system instability. Furthermore, the angular momentum of the relative orbital state can be computed with the approximate dynamics to provide additional insight. A general methodology is developed first and then applied to the problem of unstable formation dynamics in asteroid orbits. Here the dominant perturbative effects due to low-order gravitational harmonics and solar radiation pressure are modeled. Numerical simulations validate the approach and illustrate the approximation accuracy achieved.     

Fully distributed time-varying formation tracking control for multiple quadrotor vehicles via finite-time convergent extended state observer

This paper investigates a time-varying anti-disturbance formation problem for a group of quadrotor aircrafts with time-varying uncertainties and a directed interaction topology. A novel Finite-Time Convergent Extended State Observer (FTCESO) based fully-distributed formation control scheme is proposed to enhance the disturbance rejection and the formation tracking performances for networked quadrotors. By adopting the hierarchical control strategy, the multi-quadrotor system is separated into two subsystems: the outer-loop cooperative subsystem and the inner-loop attitude subsystem. In the outer-loop subsystem, with the estimation of disturbing forces and uncertain dynamics from FTCESOs, an adaptive consensus theory based cooperative controller is exploited to ensure the multiple quadrotors form and maintain a time-varying pattern relying only on the positions of the neighboring aircrafts. In the inner-loop subsystem, the desired attitude generated by the cooperative control law is stably tracked under a FTCESO-based attitude controller in a finite time. Based on a detailed algorithm to specify the cooperative control protocol, the feasibility condition to achieve the time-varying anti-disturbance formation tracking is derived and the rigorous analysis of the whole closed-loop multi-quadrotor system is given. Some numerical examples are conducted to intuitively demonstrate the effectiveness and the improvements of the proposed control framework.     

A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

太阳能飞机循环飞行的高度剖面能量策略

为满足设定的太阳能飞机多日连续飞行条件，依据飞行过程中当前时刻的飞行高度、光伏输出功率、动力电池组余量等系统状态参数，研究如何分配动力电池组充放电和电推进系统输入等功率。所用策略立足于实时功率平衡，充分利用正午前后的光伏峰值功率用于飞机爬升及充电，在午后下滑过程中利用全部光伏输出，以最大化利用光伏资源；在光伏有效输出不足时则以一定的维持功率下滑，使能量的综合损失最小。方法能够提高以预定夜间飞行高度连续多日续航的成功率，提升飞行高度、纬度、季节范围或搭载能力，或者拓展这几种飞行条件的组合域，优化太阳能飞机的适用性。     

FDI飞机舵面损伤故障全局检测的非线性数学模型

阐述了飞机在单舵面损伤故障下 ,建立故障状态下的数学模型 ,以及同样输入条件下飞机正常运动时的数学模型 ,得到飞机在相同飞行条件下损伤时的气动系数和无损伤正常时的气动系数 ,最终得到气动系数的残差。这将为以后飞机过载残差和角加速度残差奠定基础。论文中结合一定的算例给予证实推论的正确性。     

Ту-154М变稳飞机空中飞行模拟试验评述

依据Ту－１５４М变稳飞机的特点，主要进行了不同操纵器、不同控制律和不同显示画面的飞行试验研究。特别是通过中央杆和侧杆、电传系统不同控制律飞行品质特性之间、两种先进控制方案及不同显示方式的比较，不仅掌握了这方面的试飞技术和评定技术，还亲身体验到变稳飞机在发展仿真技术，新机预研及提高试飞员试飞技术和评定技术等方面的巨大作用。     

求解含多个右端向量非对称线性方程组的自适应块拟最小残量IOM(q)算法

许多实际应用问题需要求解含多个右端向量的大型非对称线性方程组 ,通常是把原来方程组分成单独几个含一个右端向量的方程组 ,再用某种迭代法分别单个求解 ,而更加经济有效的方法是应用能同时产生几个迭代向量的块迭代法来直接求解。本文在 IOM(q)算法的基础上 ,提出一种求解此类方程组的块拟最小残量 IOM(q)算法 ,讨论了如何收缩掉已收敛的部分方程组以及如何从产生的块 Krylov序列中删除线性相关或几乎线性相关向量的自适应技术。数值试验表明 ,此新的自适应块算法比块 GMRES算法及其他相关算法具有更好的收敛行为、更少的计算量和 CPU计算时间 ,是求解此类方程组的一种更加经济有效的算法。     

基于模糊粗糙集的飞机远程故障诊断模型研究

粗糙集和模糊集结合在飞机故障诊断领域有巨大的发展潜力。针对当前飞机故障诊断中所存在的问题,借助C/S模式,将粗糙集和模糊集结合,提出一种新型的飞机远程故障诊断模型,并且开发出远程诊断系统框架。系统的可行性和有效性得到了飞机故障诊断实例的证实。该系统具有客户端响应快、系统效率高、诊断及时的特点,对于当前民用飞机远程故障诊断具有重要应用价值。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

区域极点及方差约束下的航天器拦截控制：静态输出反馈情形

本文提出并讨论了具有选通窗约束的航天器拦截控制问题，指出航天器拦截控制的稳暂态性能指标可表现为系统稳态状态方差及闭环区域极点的形式。然后，基于配置控制的思想，本文完整地给出了期望静态反馈控制器的存在条件及其解析表达式，并举例说明所提设计方法的直接性与有效性