A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

Topology optimization in lightweight design of a 3D-printed flapping-wing micro aerial vehicle

Topology optimization is an effective method to obtain a lightweight structure that meets the requirements of structural strength. Whether the optimization results meet the actual needs mainly depends on the accuracy of the material properties and the boundary conditions, especially for a tiny Flapping-wing Micro Aerial Vehicle (FMAV) transmission system manufactured by 3D printing. In this paper, experimental and numerical computation efforts were undertaken to gain a reliable topology optimization method for the bottom of the transmission system. First, the constitutive behavior of the ultraviolet (UV) curable resin used in fabrication was evaluated. Second, a numerical computation model describing further verified via experiments. Topology optimization modeling considering nonlinear factors, e.g. contact, friction and collision, was presented, and the optimization results were verified by both dynamic simulation and experiments. Finally, detailed discussions on different load cases and constraints were presented to clarify their effect on the optimization. Our methods and results presented in this paper may shed light on the lightweight design of a FMAV.     

太阳能飞机循环飞行的高度剖面能量策略

为满足设定的太阳能飞机多日连续飞行条件，依据飞行过程中当前时刻的飞行高度、光伏输出功率、动力电池组余量等系统状态参数，研究如何分配动力电池组充放电和电推进系统输入等功率。所用策略立足于实时功率平衡，充分利用正午前后的光伏峰值功率用于飞机爬升及充电，在午后下滑过程中利用全部光伏输出，以最大化利用光伏资源；在光伏有效输出不足时则以一定的维持功率下滑，使能量的综合损失最小。方法能够提高以预定夜间飞行高度连续多日续航的成功率，提升飞行高度、纬度、季节范围或搭载能力，或者拓展这几种飞行条件的组合域，优化太阳能飞机的适用性。     

FDI飞机舵面损伤故障全局检测的非线性数学模型

阐述了飞机在单舵面损伤故障下 ,建立故障状态下的数学模型 ,以及同样输入条件下飞机正常运动时的数学模型 ,得到飞机在相同飞行条件下损伤时的气动系数和无损伤正常时的气动系数 ,最终得到气动系数的残差。这将为以后飞机过载残差和角加速度残差奠定基础。论文中结合一定的算例给予证实推论的正确性。     

Ту-154М变稳飞机空中飞行模拟试验评述

依据Ту－１５４М变稳飞机的特点，主要进行了不同操纵器、不同控制律和不同显示画面的飞行试验研究。特别是通过中央杆和侧杆、电传系统不同控制律飞行品质特性之间、两种先进控制方案及不同显示方式的比较，不仅掌握了这方面的试飞技术和评定技术，还亲身体验到变稳飞机在发展仿真技术，新机预研及提高试飞员试飞技术和评定技术等方面的巨大作用。     

利用热源温度场迭加法诊断持续点热源的强度及位置

可重复使用运载器的防热瓦故障会使航天器的局部结构产牛热源，并在结构中形成温度场。应用热源温度场迭加法的解函数，解得结构温度历程，然后据此温度的变化率趋势判断出热源位置，在此基础上依据多点测最值构造出辨识参数用于热强度识别，通过对一薄壁结构模型算例的计算仿真，证明了本文所提方法的有效性。论文工作为进一步开展热源诊断技术研究，提供了可资工程实践应用的数值算法体系以及有益的数值计算结论。     

基于模糊粗糙集的飞机远程故障诊断模型研究

粗糙集和模糊集结合在飞机故障诊断领域有巨大的发展潜力。针对当前飞机故障诊断中所存在的问题,借助C/S模式,将粗糙集和模糊集结合,提出一种新型的飞机远程故障诊断模型,并且开发出远程诊断系统框架。系统的可行性和有效性得到了飞机故障诊断实例的证实。该系统具有客户端响应快、系统效率高、诊断及时的特点,对于当前民用飞机远程故障诊断具有重要应用价值。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

型号设计中的安全性设计分析

通过对“长征三号”运载火箭的一些安全性设计实例帕的分析来建立安全性设计的概念，论述安全性设计在型号设计中的重要作用和地位。分析认为，安全性设计应以总体、系统设计师为主，并从设计初期抓起。     

飞行器振动智能分析与诊断

本文通过综合多个领域知识，引进功能特征描述概念，运用证据理论，提出了对飞行器等复杂系统进行分析诊断的一个新方法并初步完成了专家系统原型，通过具体实例，再现了故障现象