空天飞机的计算流体力学分析

本文分析了空天飞机空气动力学的特点和计算流体力学在发展空天飞机中的作用,讨论了发展空天飞机对计算流体力学的要求。强调了计算流体力学、地面试验和飞行试验应该相互结合成一个整体。在这基础上,探讨了利用地面试验对计算程序进行“确认”、“校准”和“鉴定”以及鉴定计算程序对地面试验的要求。本文还从计算方法、外流、进气道流动、喷管流动、燃烧室流动等方面,综述了空天飞机计算流体力学分析的最近进展和尚待解决的问题。最后对发展我国空天飞机计算流体力学提出了建议。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

机动再入飞行器自适应飞行控制系统设计

研究机动再入飞行器的制导控制问题。为了解决机动再入飞行器气动系数变化范围大、气动耦合严重和气动参数非线性过零常值大等恶劣条件下的控制，并且能充分利用飞行器可测量信息提高系统自适应能力，本文提出了状态方程参数辨识－－极点配置－－前馈补偿自适应控制的飞行控制系统的设计方法。通过对新型号再入飞行器的制导系统仿真，可以看出该控制系统使其有很好的飞行性能。     

机动再入飞行器的复合制导方案研究

对机动再入飞行器弧段的复合制导方案进行了研究，首先提出了通过高低空复合制导控制再入飞行器的终端速度和弹道倾角的思路；然后分别给出了高空最优制导律和大气厚再入最优制导律；最后对此复合制导方案进行了数字仿真。仿真结果表明此方案在理论上是可行的。     

再入制导和弹道跟踪误差分析

新一代可重复使用运载器对再入制导提出了更高地要求。目前的空间运输系统证明基于阻力加速度的制导方法是行之有效的。其基本概念是跟踪基准阻力加速度包线，在飞行过程中可根据需要更新这个包线。跟踪适当的阻力加速度包线保证了飞行器可以飞行准确的距离达到目标，同时满足弹道约束。在横向上，我们可采用类似于美国航天飞机的倾斜反转逻辑或航向角跟踪技术。本文推导出了基于反馈线性化的控制算法，并将其应用于可重复使用运载器纵向和横向的制导。最后，我们分析了阻力加速度跟踪的误差。     

跨音压气机确定应力场分析

采用全三维黏性定常、非定常数值模拟技术,对NASA 67第1级的固有非定常流动进行了研究.首先分析了定常流场和非定常时均流场间的差别以及压气机中典型的转、静干涉现象,然后对通道内确定应力的分布规律和转、静交界面确定应力各项的分布特点进行了较为深入的研究,揭示了现有确定应力模型的一些局限性,可为确定应力建模提供一定的指导作用.     

电控旋翼气弹动力学建模研究

研究了电控旋翼的气弹动力学建模方法.以有限元旋翼气弹分析程序LORA01为基础,首先给出了一种能计及襟翼移轴补偿影响的时域综合非定常气动力模型,并将伺服襟翼作为额外引入的质量体计入结构动力学模型;之后结合有限元法,根据Hamilton原理导出由广义力表示的带襟翼桨叶非线性运动方程,采用基于Newmark方法的隐式数值积分法对桨叶运动方程进行求解.最后,利用主动控制襟翼旋翼的试验数据对模型进行了比较验证,证明了所建模型的正确性.     

空天飞机的边界层转捩

本文概述了边界层转捩对空天飞机性能的影响。在介绍确定边界层转捩起始点的线性稳定性理论和简单关联公式之后，又从噪声影响、头部钝头影响和钝锥飞行试验结果等几方面，讨论了线性稳定性理论的应用。接着介绍了采用转捩函数来确定转捩区的方法。从飞行试验、理论计算和风洞试验等三方面，探讨了进一步研究高超声速边界层转捩的途径。重点介绍了ＮＡＳＡＬａｎｇｌｅｙ研究中心的超声速、高超声速静风洞技术的发展。最后，对今后空天飞机边界层转捩的研究工作提出了建议。     

高空高速无人飞行器热控制系统设计

针对飞行时间短、速度和高度变化快、表面温度波动大的无人飞行器UAV(Unmanned Aerial Vehicles)热控制系统设计难题,提出了一种可解决实际工程问题的热分析计算方法.即把热天工况、冷天工况和标准天工况作为设计/试验工况;采用参考温度法、高超音速工程预测法或计算流体动力学CFD(Computational Fluid Dynamics)数值模拟法,确定了飞行器表面温度分布,并把其作为后续热分析数学模型的外边界条件;分析结构热容量对瞬态热载荷的影响,建立与之相应的边值问题方程,并采用有限差分法求解;根据高空高速飞行特点及瞬态热载荷值,确定仪器设备舱调温系统方案.     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.