A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

摩托车空气动力学研究进展

世界摩托车工业已得到很大的发展。随着近几年来中国摩托车产量的迅速上升,加速摩托车的研究是目前摩托车发展的一种趋势。这种研究无论是对提高产品的性能,还是节能降耗部具有重要的意义。摩托车的气动特性是其设计的重要依据。目前德国,日本等国已经利用道路试验、风洞模拟进行这种研究,并促进了产品的开发,但国内的这种研究还有待进一步完善。     

尺寸参数对气动液阀启动特性的影响

为气动液阀的启动过程建立了数学模型，分析了尺寸参数对该阀启动特性的影响。计算结果表明：在保证必要的工作寿命的前提下，适当地增大控制腔气孔的直径或增大靠近控制腔的活塞端面直径有利于提高该阀的响应能力。本文所得的结论有利于此类阀门的设计。     

固体火箭发动机试验模态分析技术研究

将固体火箭发动机划分为144个自由度，采用锤击法，单点激励多点响应（SIMO）对其在4种工况下进行了频率响应的测量，应用了多种方法进行模态参数识别和数据拟合，并对其结果进行比较，获得了发动机在各工况1kHz以内的各阶固有频率、振型和阻尼，并对试验模态分析技术在固体火箭发动机试验中的应用进行了研究。     

The fundamental parameters of the central stars of eight WR ring nebulae

We describe work that has recently been completed on deriving the fundamental parameters of eight WR stars through the photoionization modelling of their surrounding nebulae using non-LTE WR flux distributions. The resulting effective temperatures range from 57 000–71 000 K for the WN4-5 stars and <30 000–42 000 K for the WN6-8 stars. The derived stellar parameters are compared with those obtained from stellar emission line modelling. We find good agreement for the hot early WN stars, indicating that the non-LTE WR flux distributions have essentially the correct shape in the crucial far-UV region. We find lower temperatures for the four cooler late WN stars, particularly for the two WN6 stars. For the nebulae surrounding these stars, we find that the model flux distributions produce too much nebular ionization. We suggest that these discrepancies arise because of the lack of line-blanketing in the WR atmospheres. For the WO1 central star of G2.4+1.4, with strong nebular He II 4686 A emission, we derive a temperature of 105 000 K, somewhat less than previous estimates. The positions of our eight WR stars on the H-R diagram are compared with the evolutionary tracks of Maeder (1990) for solar metallicity. In common with previous workers, we find that our derived luminosities are too low, giving an initial mass range of 25–40 M, below that expected for the majority of WR stars.     

高亚声速二维位势流动的气动力计算

本文提供了一个精确表达式,通过它可将亚声速位势流动仿射变换成不可压缩流动。同时给出了新的气动力计算公式。在流过Joukovski翼型的气动力计算中,它与用计算机提供的精确数值计算结果相比较,二者很符合。     

前/后掠机翼气动特性对比分析

基于NACA0012对称翼型设计了前掠机翼、后掠机翼和平直机翼,采用CFD方法计算了3种机翼的升力系数、阻力系数和俯仰力矩系数,通过压力云图和流线图分析了3种机翼的气动特性及流动机理。研究结果表明:前掠机翼上表面的流动是由翼尖流向翼根,翼根首先出现分离,而后掠机翼上表面的流动是由翼根流向翼尖,翼尖首先出现分离,平直机翼由于受翼尖涡的下洗影响,翼根首先出现分离;在30°斜掠角下,前掠机翼形成了机翼前缘涡,表现出旋涡流态气动特性。研究结果揭示了不同机翼之间的流动差异,有助于在飞行器设计过程中选择合适的气动布局。     

大迎角下导弹气动耦合控制系统分析

工程设计中，基于三通道自独立的前提来设计导弹控制器的常用方法，一般是将耦合项作为随机干扰来处理，这种方法不但具有一定的盲目性和不确定性，而且还丰厚明显的理论缺陷：耦合的存在改变了原系统的性能，严重时甚至会影响系统的稳定性。因此，只有当耦合影响很微弱时，这种方法才有实际应用价值。现分别从稳定裕度和气动参数两个方面，论述了气动交连耦合是造成大迎角飞行导弹控制系统不稳定的重要原因，并由此得出结论：对于大迎角下气动耦合强烈的导弹，其控制系统需考虑采用解耦控制，以便行这有效地变不稳定系统为稳定系统。     

1:10人-椅模型上肢的跨-超音速风洞实验

 本文介绍了1:10人椅模型上肢跨-超音速风洞实验的结果。测量了Ma=0.5～2.04和攻角10°～20°范围内上肢的阻力和侧向力。获得了在握扶手和拉中央环两种姿态下手臂的气动力特性。比较了穿衣袖与不穿衣袖两种状态下手臂的气动力数据。实验结果为确定人体上肢对高速气流吹袭的耐久限度和设计防护措施提供了重要的气动力数据。