三元共掺杂对YSZ热障涂层热物理性能的影响

采用NiO、Er_2O_3、Yb_2O_3、Y-2O_3、ZrO_2粉末为原料,用高温固相合成法制备复合陶瓷材料,研究该复合陶瓷材料的比热、热扩散系数、热导率等热物理性能,并与传统8YSZ热障涂层材料进行对比。利用XRD测定所制备的陶瓷样块的晶体结构和物相组成,分析该陶瓷试样的物相组成及高温相稳定性。结果表明:NiO、Er_2O_3、Yb_2O_3共掺YSZ后,室温至1500℃范围内的热扩散系数为0.36～0.56 mm^2/s,与8YSZ相比,降低了约20%;室温至1500℃的热导率为1.45～1.55 W/(m·K),比8YSZ降低了18%;2EYNYSZ陶瓷材料具有单一的相结构,经1500℃热处理100 h之内不发生相变。     

7YSZ coating prepared by PS-PVD based on heterogeneous nucleation

Plasma spray-physical vapor deposition (PS-PVD) as a novel coating process based on low-pressure plasma spray (LPPS) has been significantly used for thermal barrier coatings (TBCs). A coating can be deposited from liquid splats, nano-sized clusters, and the vapor phase forming different structured coatings, which shows obvious advantages in contrast to conventional technologies like atmospheric plasma spray (APS) and electron beam-physical vapor deposition (EB-PVD). In addition, it can be used to produce thin, dense, and porous ceramic coatings for special applications because of its special characteristics, such as high power, very low pressure, etc. These provide new opportunities to obtain different advanced microstructures, thus to meet the growing requirements of modern functional coatings. In this work, focusing on exploiting the potential of gas-phase deposition from PS-PVD, a series of 7YSZ coating experiments with various process conditions was performed in order to better understand the deposition process in PS-PVD, where coatings were deposited on different substrates including graphite and zirconia. Meanwhile, various substrate temperatures were investigated for the same substrate. As a result, a deposition mechanism of heterogeneous nucleation has been presented showing that surface energy is an important influencing factor for coating structures. Besides, undercooling of the interface between substrate and vapor phase plays an important role in coating structures.     

Coating deposition regularity depended on orientation difference in PS-PVD plasma jet

The YSZ coatings are prepared by the plasma spray-physical vapor deposition (PS-PVD) technology based on a specific experimental design. The structure, thickness and growth angle of YSZ coatings on the entire circumferential surface of the cylindrical sample are studied. The results indicated that the structure, thickness and deflection growth angle of YSZ coatings are related to the orientation of deposition location. The numerical simulation of the multiphase mixed fluid near the substrate is carried out and the deposition regularity and mechanism of YSZ coatings prepared by PS-PVD is deduced. The growth rate is related to the local characteristics of the plasma flow field, and is directly proportional to the field pressure and inversely proportional to the field velocity. The growth angle of the coating is generally affected by the flow direction of the plasma jet. Especially, the normal component of velocity vector, V_norm, mainly affects the speed at which the coating grows vertically upwards. The tangential component of velocity vector, V_tan, determines the degree that the coating growth direction deviates from the vertical direction. When V_tan ≠ 0, the coating forms a fine column with a certain deflection angle and finally develops into an oblique columnar structure.     

EB-PVD热障涂层对IC10合金高温持久性能的影响

采用电弧离子镀技术在IC10合金基体上制备NiCrAlYSi粘结层,采用电子束物理气相沉积(EB-PVD)技术在粘结层上制备YSZ陶瓷面层,研究TBCs涂层对IC10合金高温持久性能的影响.结果表明,IC10合金沉积TBCs涂层后,980℃高温持久寿命高于IC10合金,持久塑性略高于基体合金,IC10合金沉积TBCs涂层后,对高温持久性能无不良影响,满足使用要求.     

Influence of Gd2O3 and Yb2O3 Co-doping on Phase Stability,Thermo-physical Properties and Sintering of 8YSZ

The role of multicomponent rare earth oxides in phase stability, thermophysical properties and sintering for ZrO2-based thermal barrier coatings (TBCs) materials is investigated. 8YSZ codoped with 3 mol% Gd2O3 and 3 mol% Yb2O3 (GYb-YSZ) powders are synthesized by solid state reaction for 24 h at various temperatures. As temperature increases, stabilizers are dissolved into zirconia matrix gradually. Synthesized at 1 500 °C, GYb-YSZ is basically composed of cubic phase. GYb-YSZ exhibits excellent phase stability and sinters lower than 8YSZ by nearly three times. The thermal conductivity of GYb-YSZ is much lower than that of 8YSZ, and the thermal expansion coefficient of GYb-YSZ is comparable to that of 8YSZ. The influence of Gd2O3 and Yb2O3 co-doping on phase stability, thermal conductivity and sintering of 8YSZ is discussed.