A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

薄膜充气管充气展开特性试验

用展开导轨消除因重力产生的摩擦力,在不同充气速率与初始展开角条件下对薄膜材料充气管的充气展开特性进行了试验研究,获得了展开角,以及展开加速度和内气压的变化规律。试验及分析结果表明:充气管的充气膨胀与展开相互独立,充气膨胀过程近似为等压增容过程,折叠部位的气压变化特性与整体气压变化特性差异明显。     

纵向短周期模态试飞方法和选择

对几种纵向短周期模态试飞方法及其适用性进行了初步分析。结合实际飞行经验,提出了初步判断飞机短周期特性及选择试飞方法。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

悬筐式蒸发器的结构设计

本文从设计角度对悬筐式蒸发器的结构进行了介绍和总结,并提出了一些结构的改进意见。     

线性多变量系统闭环特征结构的最优配置

本文利用特征结构配置法所揭示的线性多变量反馈控制系统闭环特征值和特征向量的配置自由度,求解具有二次型性能指标的控制系统设计问题,使得闭环系统在具有任意给定的希望特征值集合条件下,性能指标达到极小。文中建立了最优二次型性能指标与闭环特征结构的关系,提出了逐个优化特征向量的算法,这一算法概念直观并具有较高的运算效率,可以推广到一般的特征结构优化问题。     

动态推力频域恢复技术

介绍了固体火箭发动机静止试验动态推力的测量方法。首先对试验台架和发动机进行动态校准得到系统的响应函数，然后利用频率响应函数对试验过程中测到的输出力函数进行恢复，以获得真实的输入力函数。实践证明，频域恢复技术是有效的途径之一。     

尺寸参数对气动液阀启动特性的影响

为气动液阀的启动过程建立了数学模型，分析了尺寸参数对该阀启动特性的影响。计算结果表明：在保证必要的工作寿命的前提下，适当地增大控制腔气孔的直径或增大靠近控制腔的活塞端面直径有利于提高该阀的响应能力。本文所得的结论有利于此类阀门的设计。     

多层RAM涂层对任意入射角电磁波的反射特性分析

为了解决结构型吸波材料的分析和设计中所遇到的反射系数计算问题，从电磁场理论出发，导出了电磁波以任意角入射时多层雷达吸波材料（RAM）涂层的反射系数公式，此法简单易行，为结构型吸波材料的计算机辅助分析和设计提供了基础，同时给出了计算曲线的例子，通过实例计算分析了电磁波的入射角，极化状态等对反射特性和隐身效果的影响。     

激光靶斑阵列数据遥测系统传输特性分析

介绍了一种用于激光靶场试验中测量激光靶斑阵列数据的ＷＹＫ２１遥测系统，对该系统的传输特性，包括数据传输误码率，遥测接收灵敏度和系统功率传输裕量进行了分析研究。