最小二乘直线函数的特性分析

证明了最小二乘直线函数是一种严格的凸函数。F(a,b)=∑(y-ax_i-b)~2是一个椭圆抛物面。a=[n∑x_iy_i-∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]和b=[∑x_i^2∑y_i-∑x_i∑x_i∑y_i]/[n∑x_i^2-(∑x_i)~2]仅表示极值点。a=∑x_iy_i/∑x_i和 b=[∑x_i^2∑y_i-∑x_i∑x_iy_i]/[n∑x_i^2]在某些情况下可以是极值点,但不是在每种情况下都是极值点。     

自由转子陀螺仪的伺服测试技术研究

自由转子陀螺仪是目前精度最高的一种陀螺仪,没有精密的力矩器,因此,只能采用双轴伺服法来辨识其漂移误差模型。介绍了双轴伺服测试法的基本原理,给出了双轴伺服转台的运动轨迹及重力矢量的变化规律。根据转台的运动特性,建立了自由转子陀螺仪的漂移误差模型,导出双轴伺服转台转角数据估计漂移误差模型系数的算法。从测试结果可以看出自由转子陀螺仪的长时间精度高,表明采用伺服测试法能够获得极高的测试精度,伺服转台可以作为测试自由转子陀螺仪精度的装置。     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

浮栅ROM器件的质子辐射效应实验研究

给出了浮栅ROM器件的质子辐射效应实验结果.认为浮栅ROM28C256和29C256的质子辐射效应不是单粒子效应,而是质子及其次级带电粒子产生的累积剂量造成的总剂量效应.器件出现错误有个质子注量阈值.对于29C256,高温加电退火容易消除质子产生的辐射损伤;对于28C256,高温加电退火不易消除质子产生的辐射损伤.动态监测和静态加电的器件都出现数据错误,且不能用编程器重新写入数据.然而不加电的器件在更高的质子注量辐照下未出现错误.对于应用浮栅ROM器件的航天器电子系统,冷备份是提高其可靠性的有效手段之一.     

用计算机求最小外接圆和最大内切圆的快速,精确方法

文中分别介绍了用计算机求最小外接圆和最大内切圆的新算法。该算法中每一步都能确定圆心的最佳移动方向,沿该方向的圆心移动量可由公式确定,从而只需少数几步迭代就可求得实际轮廓的最小外接圆和最大内切圆的精确位置。     

应用加权中值滤波法检测薄壁梁式挠性器件下摆量

应用加权中值滤波法对薄壁梁式挠性器件下摆量进行高准确度CCD检测。薄壁梁式挠性器件在测量过程中测量图像存在高频抖动现象,因此测量准确度不高,运用加权中值滤波后使用最小二乘法细分技术,可以在实现提高测量准确度的同时,消除高频抖动带来的误差,从而可以有效提高CCD测量薄壁梁式挠性器件下摆量的准确度。实验表明,该方法比传统测量方法准确度提高20倍以上。     

Soil moisture estimation by using multipolarization SAR image

In the past studies, different soil moisture estimation models were developed for bare soil areas by using remotely-sensed data. However, there are few models that can be used to estimate soil moisture in vegetated areas. Water Cloud Model (WCM) model is a widely used soil moisture estimation model has been developed for vegetated areas. In this study, the WCM model was extended to take soil roughness parameter into consideration. The modeling and its accuracy assessment were done by using multi-polarization Airborne Synthetic Aperture Radar (AIRSAR) images and ground data collected during field Soil Moisture Experiments.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.